National Instruments NI WLS/ENET-9163 - Manuals

© National Instruments Corporation 7 NI WLS/ENET-9163 Carrier User Guide and Specifications Device Documentation and Specifications Check ni.com/manuals for the most recent device and software documentation. If you do not have Web access, NI-DAQmx includes a Documentation CD that includes documentat...

NI WLS/ENET-9163 Carrier User Guide and Specifications 8 ni.com Installing the Software NI WLS/ENET-9000 Series device software support for Windows Vista/XP/2000 is provided by NI-DAQmx. The DAQ Getting Started Guide , which is accessible from Start» Programs»National Instruments»NI-DAQ or at ni.com...

© National Instruments Corporation 9 NI WLS/ENET-9163 Carrier User Guide and Specifications Figure 3. Stacking Grooves and Rubber Standoffs for Desktop Use Mounting the NI WLS/ENET-9000 Series Device You can mount the NI WLS/ENET-9000 Series device using a 75 mm DIN-Rail kit or a panel mount kit. Fo...

NI WLS/ENET-9163 Carrier User Guide and Specifications 10 ni.com Attaching the NI 9910 DIN-Rail The NI 9910 DIN-Rail kit contains one clip for mounting the device on a standard 35 mm DIN-Rail. To mount the device on a DIN-Rail, fasten the DIN-Rail clip to the device using a number 2 Phillips screwdr...

© National Instruments Corporation 11 NI WLS/ENET-9163 Carrier User Guide and Specifications Mounting the NI WLS/ENET-9000 Series to a Panel Thread inserts are located in the NI WLS/ENET-9000 Series device for mounting it to a panel. Refer to Figure 5 for dimensions. Figure 5. Device Panel Mounting ...

NI WLS/ENET-9163 Carrier User Guide and Specifications 12 ni.com Setting Up the NI WLS/ENET-9000 Series Device Complete the following steps to prepare the NI WLS/ENET-9000 Series device for use: 1. Before connecting the hardware, install NI-DAQmx software, LabVIEW SignalExpress, and the NI-DAQ Devic...

© National Instruments Corporation 13 NI WLS/ENET-9163 Carrier User Guide and Specifications Figure 6. Ring Lug Attached to the Ground Screw Note Additionally, attach a wire with a ring lug to all other C Series I/O module cable shields. You must connect this wire to the ground terminal of the devic...

NI WLS/ENET-9163 Carrier User Guide and Specifications 14 ni.com Device Interface Figure 7 shows the NI WLS/ENET-9163 carrier interface. Figure 7. NI WLS/ENET-9163 Carrier Interface Reset Button The NI WLS/ENET-9000 Series devices are equipped with a reset button as shown in Figure 7. Pressing the r...

© National Instruments Corporation 15 NI WLS/ENET-9163 Carrier User Guide and Specifications LED Indicators The LED indicators for the NI WLS/ENET-9000 Series device are listed in Table 2. Table 2. LED State/Device Status LED Description Color LED State Device Status 10/100 Green On Connected at 100...

NI WLS/ENET-9163 Carrier User Guide and Specifications 16 ni.com Pinouts Trigger Connector Figure 8. Trigger Connector Pinout Cabling Table 3 shows the standard Ethernet cable wiring connections for both normal and crossover cables. Table 3. Ethernet Cable Wiring Connections Pin Connector 1 Connecto...

© National Instruments Corporation 17 NI WLS/ENET-9163 Carrier User Guide and Specifications Figure 9. Ethernet Connector Pinout Using the NI WLS/ENET-9000 Series Device C Series I/0 Modules National Instruments C Series I/O modules provide built-in signal conditioning and screw terminal, spring ter...

NI WLS/ENET-9163 Carrier User Guide and Specifications 18 ni.com Analog Input To perform analog input measurements, insert a supported analog input C Series I/O module into the NI WLS/ENET-9163 carrier. The measurement specifications, such as number of channels, channel configuration, sample rate, a...

© National Instruments Corporation 19 NI WLS/ENET-9163 Carrier User Guide and Specifications The NI-DAQmx Help is available after installation from Start» Programs» National Instruments»NI-DAQ»NI-DAQmx Help . To view the LabVIEW Help, in version 8.0 or later, select Help»Search the LabVIEW Help in L...

NI WLS/ENET-9163 Carrier User Guide and Specifications 20 ni.com When the reference trigger occurs, the NI WLS/NET-9163 Series device continues to write samples to the buffer until the buffer contains the number of posttrigger samples desired. Figure 10 shows the final buffer. Figure 10. Reference T...

© National Instruments Corporation 21 NI WLS/ENET-9163 Carrier User Guide and Specifications Note Pause triggers are only sensitive to the level of the source, not the edge. Analog Input Timing Signal AI Sample Clock A sample consists of one reading from each channel in the AI task. ai/SampleClock s...

NI WLS/ENET-9163 Carrier User Guide and Specifications 22 ni.com Simultaneous Sample-and-Hold Simultaneous sample-and-hold (SSH) C Series analog input modules contain multiple A/D converters or circuitry that allows all the input channels to be sampled at the same time. These modules sample their in...

© National Instruments Corporation 23 NI WLS/ENET-9163 Carrier User Guide and Specifications Specifications These specifications are typical at 25 °C unless otherwise noted. For C Series I/O module specifications, refer to the documentation included with the modules. Note These specifications are fo...

NI WLS/ENET-9163 Carrier User Guide and Specifications 24 ni.com PFI Functionality PFI 1 .......................................................Sample Clock In, Sample Clock Out 1 PFI 0 .......................................................Start Trigger In, Start Trigger Out, Pause In, Reference Tr...

NI WLS/ENET-9163 Carrier User Guide and Specifications 25 ni.com Security ...................................................WEP-40, WEP-104, WPA, WPA2 EAP Type .................................LEAP, PEAP 1 , TTLS 2 , TLS Center frequency 11b ...................................................2412–2...

NI WLS/ENET-9163 Carrier User Guide and Specifications 26 ni.com 11g, PER<10% 54 Mbps ...........................................–68 dB/min 48 Mbps ...........................................–68 dB/min 36 Mbps ...........................................–75 dB/min 24 Mbps ............................

© National Instruments Corporation 27 NI WLS/ENET-9163 Carrier User Guide and Specifications Module I/O States At power-on ........................................... Module-dependent. Refer to the documentation included with the C Series I/O module. Power Requirements Caution You must use a Nationa...

NI WLS/ENET-9163 Carrier User Guide and Specifications 28 ni.com Safety Standards If you need to clean the carrier, wipe it with a dry towel. The NI WLS/ENET-9163 carrier is designed to meet the requirements of the following standards of safety for electrical equipment for measurement, control, and ...

© National Instruments Corporation 29 NI WLS/ENET-9163 Carrier User Guide and Specifications Environmental The NI WLS/ENET-9163 carrier is intended for indoor use only. For outdoor use, mount the system in a suitably rated enclosure. Operating temperature(IEC-60068-2-1 and IEC-60068-2-2) .... 0 to 5...

NI WLS/ENET-9163 Carrier User Guide and Specifications 30 ni.com Electromagnetic Compatibility This product is designed to meet the requirements of the following standards of EMC for electrical equipment for measurement, control,and laboratory use: • EN 61326 EMC requirements; Minimum Immunity • EN ...

© National Instruments Corporation 31 NI WLS/ENET-9163 Carrier User Guide and Specifications • Plug the transmitter into a different outlet so that the transmitter and the receiver are on different branch circuits. This hardware may generate emissions that exceed regulatory requirements or may becom...

© National Instruments Corporation 33 NI WLS/ENET-9163 Carrier User Guide and Specifications Environmental Management National Instruments is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from o...

NI WLS/ENET-9163 Carrier User Guide and Specifications 34 ni.com Regulatory Information 1 United States This product generates and radiates radio frequency energy. To comply with the radio frequency radiation exposure guidelines in an uncontrolled environment, this equipment must be installed and op...

© National Instruments Corporation 35 NI WLS/ENET-9163 Carrier User Guide and Specifications Europe – Restrictions for Use of 2.4 GHz Frequencies in European Community Countries Japan The certified radio equipment is embedded in this device. 本機器には認証済み無線設備が内蔵されています België/ Belgique: For private usage...

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their resp...