National Instruments NI 9802 - Manuals

Page 2 - The NI 9802 is supported only in CompactRIO; to determine which software you need for; Note; The safety guidelines and specifications in this

NI 9802 Operating Instructions and Specifications 2 ni.com The National Instruments 9802 is an SD Card storage module that can read from and write to SD Cards. Note The NI 9802 is supported only in CompactRIO active chassis, such as the cRIO-910 x . This document describes how to use the NI 9802 and...

Page 3 - Safety Guidelines; Hot Surface; Safety Guidelines for Hazardous Locations; not; not

© National Instruments Corp. 3 NI 9802 Operating Instructions and Specifications Safety Guidelines Operate the NI 9802 only as described in these operating instructions. Hot Surface This icon denotes that the component may be hot. Touching this component may result in bodily injury. Safety Guideline...

Page 4 - Special Conditions for Hazardous Locations Use in Europe

NI 9802 Operating Instructions and Specifications 4 ni.com Caution Substitution of components may impair suitability for Class I, Division 2. Caution For Zone 2 applications, install the system in an enclosure rated to at least IP 54 as defined by IEC 60529 and EN 60529. Special Conditions for Hazar...

Page 5 - Inserting and Removing SD Cards; Using SD Cards that are not approved by NI might

© National Instruments Corp. 5 NI 9802 Operating Instructions and Specifications the system in a metal enclosure. Suppression ferrites must be installed on power supply inputs near power entries to modules and controllers. Power supply and module cables must be separated on opposite sides of the enc...

Page 7 - LEDs; LED

© National Instruments Corp. 7 NI 9802 Operating Instructions and Specifications LEDs Table 1. LED Descriptions LED SD Card Slot Description Present (Card 0), Green SD Card Slot 0 This LED is lit when an SD Card is in Slot 0 and the SD Card slot door is closed. Busy (Card 0), Yellow SD Card Slot 0 T...

Page 8 - SD Card Slot Doors; Opening an SD Card slot door or removing an; Screw the slot doors closed completely using a; Sleep Mode

NI 9802 Operating Instructions and Specifications 8 ni.com SD Card Slot Doors Do not open an SD Card slot door or remove an SD Card while the yellow LED for that card is lit or flashing. If you open an SD Card slot door while the yellow LED for that card is lit or flashing, the NI 9802 software acts...

Page 9 - Do; Specifications

© National Instruments Corp. 9 NI 9802 Operating Instructions and Specifications about support for sleep mode. You can enable sleep mode in software. Refer to the driver software documentation for more information. Caution Do not enable sleep mode while either of the SD Card slot yellow LEDs are lit...

Page 10 - Data Storage Characteristics; SD Card; Contact NI for Bellcore MTBF specifications; Power Requirements; Power consumption from chassis

NI 9802 Operating Instructions and Specifications 10 ni.com Data Storage Characteristics Number of SD Cards ........................ 2 Storage .............................................. 2 GB max storage for each SD Card Data transfer...................................... 2 MB/s read/write for on...

Page 11 - Physical Characteristics; If you need to clean the module, wipe it with a dry towel.; Safety; Safety Standards; For UL and other safety certifications, refer to the

© National Instruments Corp. 11 NI 9802 Operating Instructions and Specifications Physical Characteristics If you need to clean the module, wipe it with a dry towel. Weight ............................................... 147 g (5.2 oz) without SD Cards Safety Safety Standards This product is designe...

Page 12 - Hazardous Locations; Environmental

NI 9802 Operating Instructions and Specifications 12 ni.com Hazardous Locations U.S. (UL) .......................................... Class I, Division 2, Groups A, B, C, D, T4;Class I, Zone 2,AEx nA IIC T4 Canada (C-UL) ................................. Class I, Division 2, Groups A, B, C, D, T4;Cla...

Page 13 - noncondensing; Shock and Vibration; To meet these specifications, you must panel mount the system.

© National Instruments Corp. 13 NI 9802 Operating Instructions and Specifications Ingress protection.............................. IP 40 1 Operating humidity(IEC 60068-2-56).............................. 10 to 90% RH, noncondensing Storage humidity(IEC 60068-2-56).............................. 5 to ...

Page 14 - Electromagnetic Compatibility; EN 61326 EMC requirements Industrial Immunity; CE Compliance; Refer to the Declaration of Conformity (DoC) for

NI 9802 Operating Instructions and Specifications 14 ni.com Electromagnetic Compatibility This product is designed to meet the requirements of the following standards of EMC for electrical equipment for measurement, control, and laboratory use: • EN 61326 EMC requirements; Industrial Immunity • EN 5...

Page 15 - Waste Electrical and Electronic Equipment (WEEE); EU Customers; At the end of their life cycle, all products; Where to Go for Support; you have access to

© National Instruments Corp. 15 NI 9802 Operating Instructions and Specifications Waste Electrical and Electronic Equipment (WEEE) EU Customers At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instrum...