National Instruments NI 8352 - Manuals
National Instruments NI 8352 – Manual in PDF format online.
Manuals:
Manual National Instruments NI 8352
Summary
Important Information Warranty The NI 8352/8353 is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defec...
Compliance Compliance with FCC/Canada Radio Frequency Interference Regulations Determining FCC Class The Federal Communications Commission (FCC) has rules to protect wireless communications from interference. The FCC places digital electronics into two classes. These classes are known as Class A (fo...
© National Instruments Corporation v NI 8352/8353 User Manual Contents About This Manual Conventions ................................................................................................................... ixRelated Documentation...............................................................
Contents © National Instruments Corporation vii NI 8352/8353 User Manual Chapter 4Common Configuration Questions General Questions .......................................................................................................... 4-1Boot Options .................................................
© National Instruments Corporation ix NI 8352/8353 User Manual About This Manual The NI 8352/8353 User Manual contains information about installing, configuring, using, and maintaining the NI 8352/8353. Conventions The following conventions appear in this manual: » The » symbol leads you through nes...
About This Manual NI 8352/8353 User Manual x ni.com Related Documentation The following documents contain information that you may find helpful as you read this manual: • CompactPCI Specification PICMG 2.0 R 3.0 • PXI Hardware Specification, Revision 2.1 • PXI Software Specification, Revision 2.1 • ...
© National Instruments Corporation 1-1 NI 8352/8353 User Manual 1 Getting Started This chapter describes the key features of the NI 8352/8353 and lists the kit contents and optional equipment you can order from National Instruments. Unpacking Carefully inspect the shipping container and the NI 8352/...
Chapter 1 Getting Started NI 8352/8353 User Manual 1-2 ni.com If you are missing any of the above items, or if you have the incorrect AC power cable, contact National Instruments. Key Features The NI 8352/8353 combines the performance of a PC with a National Instruments remote controller for PXI in ...
Chapter 1 Getting Started © National Instruments Corporation 1-3 NI 8352/8353 User Manual Slots • PCI Express x8 slot • PCI-X 64-bit 133 MHz Video • ATI ES 1000 with 16 MB SDRAM HDD • 2 × 250 GB (or greater) SATA hard drive RAID0 • 4 × 3.5 in. expansion bay SATA DVD-ROM • Slim DVD-ROM drive Onboard ...
Chapter 1 Getting Started NI 8352/8353 User Manual 1-4 ni.com • Wake up on PCI • Supports ACPI S1/S4/S5 functions Front Panel LEDs • Power • LAN activity • HDD activity • Thermal trip LED System Management • SMB (I 2 C) • Temperature, voltage, and fan monitors • Chassis intrusion
Chapter 1 Getting Started © National Instruments Corporation 1-5 NI 8352/8353 User Manual NI 8352/8353 Description Figure 1-1 shows the key features of the NI 8352/8353 front panel. For detailed information about the NI 8352/8353 rear panel, refer to Chapter 3, I/O Information . Figure 1-1. Front Vi...
Chapter 1 Getting Started NI 8352/8353 User Manual 1-6 ni.com Optional Equipment Memory Upgrades You can upgrade the NI 8352/8353 memory to a maximum of 8 GB. Note A 32-bit operating system such as Windows XP Pro addresses a maximum of 4 GB. The NI 8352/8353 supports dual-channel DDR-II SDRAM unbuff...
Chapter 1 Getting Started © National Instruments Corporation 1-7 NI 8352/8353 User Manual National Instruments Software National Instruments has developed several software kits you can use with the NI 8352/8353. National Instruments hardware and software work together to help you make the most of yo...
© National Instruments Corporation 2-1 NI 8352/8353 User Manual 2 Installation and BIOS Setup This chapter describes how to install, configure, and use the NI 8352/8353. Before connecting the NI 8352/8353 to a power source, read this chapter and the Read Me First: Safety and Radio-Frequency Interfer...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-2 ni.com • Modification —Do not modify any part of the NI 8352/8353 from its original condition. Unsuitable modifications may result in safety hazards. Chassis Cooling Considerations The NI 8352/8353 is designed to operate on a bench o...
Chapter 2 Installation and BIOS Setup © National Instruments Corporation 2-3 NI 8352/8353 User Manual 6. Connect the MXI-Express port on the rear of the NI 8352/8353 to the PXI chassis and power on the chassis. 7. Power on the NI 8352/8353. 8. Verify that the NI 8352/8353 boots. If it does not boot,...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-4 ni.com Main BIOS Setup Menu Main Setup Features System Time To set the system date and time, enter the correct information in the appropriate fields. Press <Enter> to save the data. System Date Using the arrow keys, highlight t...
Chapter 2 Installation and BIOS Setup © National Instruments Corporation 2-5 NI 8352/8353 User Manual When the SATA Controller Mode is set to Enhanced, the following items display. Serial ATA (SATA) RAID Select Enabled to enable Serial ATA RAID functions. (For Windows, use the RAID driver if this fe...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-6 ni.com CHS Format In this format, the BIOS displays the following items: TYPE : This item displays the IDE or SATA device type. Cylinders : This item indicates the status of cylinders. Headers : This item indicates the number of head...
Chapter 2 Installation and BIOS Setup © National Instruments Corporation 2-7 NI 8352/8353 User Manual Ultra DMA Mode Use this option to select Ultra DMA Mode. The options are Disabled (default), Mode 0 , Mode 1 , Mode 2 , Mode 3 , Mode 4 , and Mode 5 . System Memory This display shows the amount of ...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-8 ni.com Resume on Modem Ring Select On to “wake up” your system when your modem receives an incoming call. The options are On (default) and Off . Power Loss Control Use this setting to choose how the system reacts when power returns a...
Chapter 2 Installation and BIOS Setup © National Instruments Corporation 2-9 NI 8352/8353 User Manual Cache Base 0–512K If enabled, this feature allows the data stored in the 0 –512K memory area to be cached (written) into a buffer, a storage area in static DROM (SDROM), or written into L1, L2 cache...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-10 ni.com Discrete MTRR Allocation If enabled, Memory Type Range Registers (MTRRs) are configured as distinct, separate units and cannot be overlapped. If enabled, you can achieve better graphic effects when using a Linux graphic drive...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-12 ni.com Route Port 80h Cycles to Use this feature to select the bus where debug information is sent. The options are Disabled , PCI (default), and LPC. USB Function Select Enabled to enable the function of specified USB devices. The ...
Chapter 2 Installation and BIOS Setup © National Instruments Corporation 2-13 NI 8352/8353 User Manual Thermal Management 2 1 Set to Enabled to use thermal management 2 (TM2), which lowers CPU voltage and frequency when the CPU temperature reaches a predefined overheat threshold. Set to Disabled to ...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-14 ni.com Processor Power Management 1 Use this feature to choose the processor power management mode. The options are Disabled (default) and C States Only . If set to Disabled , C states and GV1/GV3 are disabled. If set to C States On...
Chapter 2 Installation and BIOS Setup © National Instruments Corporation 2-15 NI 8352/8353 User Manual Interrupt Use this setting to select the interrupt request (IRQ) for serial port B. The options are IRQ3 (default) and IRQ4 . Parallel Port Use this setting to assign parallel port control. The opt...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-16 ni.com Event Log Capacity This display informs you of the event log capacity. It is not a setting. View DMI Event Log Highlight this item and press <Enter> to view the event log contents. Event Logging Use this setting to enab...
Chapter 2 Installation and BIOS Setup © National Instruments Corporation 2-17 NI 8352/8353 User Manual Flow Control Use this setting to select the fl ow control for console redirection. The options are None , XON/XOFF , and CTS/RTS (default). Console Connection Use this setting to select the console...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-18 ni.com used as a workstation. Select Server if your system is used as a server. Select Disable to disable the fan speed control function and allow the onboard fans to run constantly at full speed (12 V). Select 4-pin Quiet (or Super...
Chapter 2 Installation and BIOS Setup © National Instruments Corporation 2-19 NI 8352/8353 User Manual Clear System Event Logging Select Enabled to force the BIOS to clear the system event logs during the next cold boot. The options are Enabled and Disabled (default). Existing Event Log Number This ...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-20 ni.com System Event Log/System Event Log (List Mode) These options display the System Event (SEL) Log and System Event (SEL) Log in List Mode. The options are SEL (System Event Log) Entry Number , SEL Record ID , SEL Record Type , T...
Chapter 2 Installation and BIOS Setup © National Instruments Corporation 2-21 NI 8352/8353 User Manual Fixed Disk Boot Sector This setting may offer protection against viruses when set to Write Protect , which protects the boot sector on the hard drive from having a virus written to it. The options ...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-22 ni.com Load Setup Defaults Highlight this item and press <Enter> to load the default settings for all items in the BIOS Setup. These are the safest settings to use. Discard Changes Highlight this item and press <Enter> t...
Chapter 2 Installation and BIOS Setup © National Instruments Corporation 2-25 NI 8352/8353 User Manual Installing the Slide Assemblies in the Rack Use the M5 screws and washers to secure the slide assemblies to the rack, as shown in Figure 2-3. Figure 2-3. Installing Slide Assemblies into Rack 1 M5 ...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-26 ni.com Installing the Chassis into the Rack Follow these steps to install the chassis in the rack: 1. Push the inner slides, attached to the chassis, into the grooves of the outer slide assemblies installed in the rack, as shown in ...
Chapter 2 Installation and BIOS Setup NI 8352/8353 User Manual 2-28 ni.com Hard Drive Recovery The NI 8352/8353 includes two methods of restoring the original factory condition of your hard drive. Hard drive-based recovery stores a factory backup on a separate part of your hard drive, allowing you t...
© National Instruments Corporation 3-1 NI 8352/8353 User Manual 3 I/O Information This chapter describes the NI 8352/8353 I/O connectors. Rear Panel Connectors Table 3-1 lists various peripherals and their corresponding NI 8352/8353 external connectors, bus interfaces, and functions. Table 3-1. NI 8...
Chapter 3 I/O Information NI 8352/8353 User Manual 3-2 ni.com Figure 3-1 shows the rear panel layout of the NI 8352/8353. Figure 3-1. NI 8352/8353 Rear Panel Layout PS/2 Figure 3-2 shows the location and pinouts for the PS/2 keyboard and mouse connectors on the NI 8352/8353. Table 3-2 lists and desc...
Chapter 3 I/O Information © National Instruments Corporation 3-3 NI 8352/8353 User Manual Universal Serial Bus Figure 3-3 shows the location and pinouts for the Universal Serial Bus (USB) connectors on the NI 8352/8353. Table 3-3 lists and describes the USB connector signals. AMP manufactures a USB ...
Chapter 3 I/O Information NI 8352/8353 User Manual 3-4 ni.com Serial Figure 3-4 shows the location and pinouts for the serial connector on the NI 8352/8353. Table 3-4 lists and describes the serial connector signal. AMP manufactures a serial port mating connector, part number 745491-5. Figure 3-4. S...
MXI-Express Connectors Refer to your MXI-Express hardware user manual for connector information. Table 3-6. Ethernet Connector Signals Pin Signal Name Signal Description 1 D0P Differential Pair 0 + 2 D0N Differential Pair 0 – 3 D1P Differential Pair 1+ 4 D2P Differential Pair 2+ 5 D2N Differential P...
© National Instruments Corporation 4-1 NI 8352/8353 User Manual 4 Common Configuration Questions This chapter answers common configuration questions you may have when using the NI 8352/8353. General Questions What do the LEDs on the NI 8352/8353 front panel mean? The power indicator lights when the ...
Chapter 4 Common Configuration Questions NI 8352/8353 User Manual 4-2 ni.com • An external USB mass storage device such as a USB hard drive or CD-ROM Note You should enable Legacy USB support to boot from USB devices. Refer to the BIOS Setup section of Chapter 2, Installation and BIOS Setup , for mo...
Chapter 4 Common Configuration Questions NI 8352/8353 User Manual 4-4 ni.com The PXI specification allows many combinations of PXI chassis and system modules. To assist system integrators, the manufacturers of PXI chassis and system modules must document the capabilities of their products. The minim...
© National Instruments Corporation 5-1 NI 8352/8353 User Manual 5 Troubleshooting This chapter answers common troubleshooting questions you may have when using the NI 8352/8353. What if the NI 8352/8353 does not boot? Several problems can cause a controller not to boot. Here are some things to look ...
© National Instruments Corporation A-1 NI 8352/8353 User Manual A Specifications This appendix lists the NI 8352/8353 electrical, mechanical, and environmental specifications. Electrical AC Input Input voltage range................................. 100 –240 VAC Operating voltage range 1 ...............
Appendix A Specifications NI 8352/8353 User Manual A-2 ni.com PCI/PCI Express .....................................One PCI Express x8 slot or one PCI 32-bit slot (both risers included) SATA ......................................................Four SATA ports compliant with the Serial-ATA 2.0 specif...
Appendix A Specifications © National Instruments Corporation A-3 NI 8352/8353 User Manual Hard Disk Drive Capacity ................................................. 250 GB in one, two, or four-drive configurations for maximum capacity of 1 TB Interface ..................................................
Appendix A Specifications NI 8352/8353 User Manual A-4 ni.com Altitude ...................................................2,000 m Installation Category...............................II Pollution Degree .....................................2 Safety This product is designed to meet the requirements of...
Appendix A Specifications © National Instruments Corporation A-5 NI 8352/8353 User Manual Environmental Management National Instruments is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our ...
© National Instruments Corporation B-1 NI 8352/8353 User Manual B Hardware Configuration This appendix describes how to configure and upgrade the NI 8352/8353 hardware. Caution Hazardous Voltage Area No user (operator) serviceable parts are inside the NI 8352/8353. The hardware configuration and upg...
Appendix B Hardware Configuration © National Instruments Corporation B-3 NI 8352/8353 User Manual Jumper Settings Figure B-2 shows the jumper locations on the NI 8352/8353. Figure B-2. NI 8352/8353 Jumper Locations 1 JI 2 C1 2 JI 2 C2 3 JPL1 4 JPL2 5 JPG1 6 JBT1 7 JP3 8 JPF 9 JWD 8 4 3 1 2 5 6 7 9
Appendix B Hardware Configuration © National Instruments Corporation B-5 NI 8352/8353 User Manual Clear CMOS Jumper: JBT1 Caution Always remove the AC power cord from the system before clearing CMOS. Caution For an ATX power supply, you must completely shut down the system, remove the AC power cord,...
Appendix B Hardware Configuration © National Instruments Corporation B-7 NI 8352/8353 User Manual Other Connectors Figure B-10 shows the locations of other connectors on the NI 8352/8353. Figure B-10. NI 8352/8353 Other Connector Locations 1 Fan6 2 Fan1 3 FP CTRL JF1 4 Fan2 5 Fan3 6 Fan4 7 JL1 8 USB...
Appendix B Hardware Configuration NI 8352/8353 User Manual B-8 ni.com Chassis Intrusion Switch Connector: JL1 JL1 is the chassis intrusion header. Attach the appropriate cable to be informed of a chassis intrusion. Figure B-11. Chassis Intrusion Switch Connector (JL1) Front Panel Connector: JF1 JF1 ...
Appendix B Hardware Configuration NI 8352/8353 User Manual B-10 ni.com Front USB Connectors: USB 3/4 and USB 5/6 Two Universal Serial Bus ports (USB 1/2) are on the I/O back panel. In addition, four USB ports (USB 3/4 and USB 5/6) are at J45 and J46 on the motherboard. You can use these ports to pro...
Appendix B Hardware Configuration © National Instruments Corporation B-11 NI 8352/8353 User Manual Fan Power Connectors: Fan1 to Fan6 The NI 8352/8353 has six fan connectors (Fan1 to Fan6). Fan6 is designated as the CPU fan. Note All fans are 4-pin fans. However, pins 1–3 of the fan headers are back...
Appendix B Hardware Configuration NI 8352/8353 User Manual B-12 ni.com Serial Port Header: COM2 The motherboard includes two serial headers, COM1 (J31) and COM2. COM1 is a port located next to VGA port. Figure B-16. Serial Port Header (COM2) PCI Express Slot The mainboard provides one PCI Express x8...
Appendix B Hardware Configuration © National Instruments Corporation B-15 NI 8352/8353 User Manual Dual-Channel Memory Configuration For optimum memory performance, you can use dual-channel memory configurations. In these configurations, identical memory is installed in channels A and B. Figures B-1...
Appendix B Hardware Configuration NI 8352/8353 User Manual B-16 ni.com Table B-7 shows all possible memory module combinations. Installing memory with different speeds is allowed, but the faster memory downshifts to the speed of the slower memory. VGA memory 16 MB 2.85 TSEG 1 MB 2.84 Memory availabl...
Appendix B Hardware Configuration © National Instruments Corporation B-19 NI 8352/8353 User Manual Installing DDR Modules Follow these steps to install DDR modules: 1. Press the cover release buttons on the top of the NI 8352/8353. 2. Push the cover backward to remove it. 3. Align the notch in the c...
Appendix B Hardware Configuration NI 8352/8353 User Manual B-20 ni.com Removing DDR Modules Follow these steps to remove DDR modules: 1. Open the plastic clips on both sides of the module. 2. Remove the module from the slot. Upgrading and Replacing Hard Disk Drives Figure B-22 shows the NI 8352/8353...
Appendix B Hardware Configuration © National Instruments Corporation B-21 NI 8352/8353 User Manual DVD-ROM Connector: IDE1 The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 66/100 controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 66/100 functions. You can connect a DVD-ROM or ...
Appendix B Hardware Configuration NI 8352/8353 User Manual B-22 ni.com Hard Disk Installation Caution Before removing or installing a hard disk drive, be sure the NI 8352/8353 is powered off and not connected to AC power. Follow these steps to install a hard disk drive: 1. Press the release tab to r...
Appendix B Hardware Configuration © National Instruments Corporation B-23 NI 8352/8353 User Manual 4. Slide a hard disk drive into the SCA drive tray. Secure the drive to the tray with three screws on each side of the tray, as shown in Figure B-27. Figure B-27. Sliding Hard Disk Drive into SCA Drive...
© National Instruments Corporation C-1 NI 8352/8353 User Manual C Intel SATA RAID Utility for Intel ICH7R This appendix describes the Intel SATA RAID utility for Intel ICH7R. Intel RAID Configuration Utility The Intel RAID Configuration utility is an embedded BIOS utility for creating, managing, and...
Appendix C Intel SATA RAID Utility for Intel ICH7R NI 8352/8353 User Manual C-2 ni.com 6. Use the up and down arrow keys to select the RAID0 array stripe size (4 –128 KB). Press <Enter>. Note For a server, use a lower stripe size. For a multimedia system, use a higher stripe size. The default ...
Appendix C Intel SATA RAID Utility for Intel ICH7R NI 8352/8353 User Manual C-4 ni.com Deleting a RAID Volume Caution Be sure to back up your data before deleting a RAID set. You will lose all data on the disk drives when deleting a RAID set. Follow these steps to delete a RAID volume: 1. From the m...
© National Instruments Corporation G-1 NI 8352/8353 User Manual Glossary Symbol Prefix Value p pico 10 – 12 n nano 10 – 9 μ micro 10 – 6 m milli 10 – 3 k kilo 10 3 M mega 10 6 G giga 10 9 T tera 10 12 Symbols • Degrees Ω Ohms % Percent A A Amperes A/D Analog-to-digital. Most often used as A/D conver...
© National Instruments Corporation I-1 NI 8352/8353 User Manual Index Numerics 32 Bit I/O, 2-6 A AC power cables (table), 1-2ACPI Mode, 2-7Adjacent Cache Line Prefetch, 2-13advanced BIOS setup, 2-7Advanced Chipset Control, 2-11Advanced Processor Options, 2-12 B Base I/O Address, 2-14, 2-15BAUD Rate,...
National Instruments Manuals
-
National Instruments SCC-AI01
Manual
-
National Instruments USB-6008/6009
Manual
-
National Instruments 7334
Manual
-
National Instruments NI 9403E
Manual
-
National Instruments DIO 6533
Manual
-
National Instruments NI PCI-5114
Manual
-
National Instruments 1000DC
Manual
-
National Instruments 321518A-01
Manual
-
National Instruments NI 5672
Manual
-
National Instruments USB-9221
Manual
-
National Instruments PCI
Manual
-
National Instruments NI 9229
Manual
-
National Instruments 6211
Manual
-
National Instruments NI 9217
Manual
-
National Instruments NI USB-6009
Manual
-
National Instruments NI sbRIO-960x
Manual
-
National Instruments 6024E
Manual
-
National Instruments 3.x
Manual
-
National Instruments NI 784xR
Manual
-
National Instruments NI-Motion
Manual