Miele WCD660 - Manuals

Warning and Safety instructions 7 This washing machine complies with all current local and nationalsafety requirements. However, inappropriate use can lead to per-sonal injury and damage to property. Read the operating instructions carefully before using the washingmachine. They contain important in...

Warning and Safety instructions 8  The washing machine can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience orknowledge, if they are supervised whilst using it or have been shownhow to use it safely and recognise and understand the con-sequences of...

Warning and Safety instructions 11 Correct use  Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the elec-tronic control unit may be impaired at temperatures below freezingpoint.  Before using the machine for the first...

Warning and Safety instructions 13  If detergent comes into contact with the eyes, rinse them thor- oughly with lukewarm water immediately. If swallowed, seek medicalassistance immediately and retain the packaging or label for refer-ence. Those with skin problems or sensitive skin should avoid thei...

Operating the washing machine 14 Control panel             a Control field The control field consists of a timedisplay and various sensor controls.The individual sensor controls areexplained in the following sections. b Sensor controls – temperature for selecting the temperature. c Se...

Operating the washing machine 15 g Time display After the programme has started, theprogramme duration will appear inthe display in hours and minutes.When Delay start is being used, theprogramme duration will appear afterthe Delay start time has elapsed. h Sensor controls      The Delay start tim...

Before using for the first time 16  Damage resulting from incorrect installation and connection.Installing and connecting the wash-ing machine incorrectly will causeserious property damage.See “Installation”. Protective foil and stickers re-moval  Remove: - The protective foil from the door - Any ...

Before using for the first time 17 Miele@home Your washing machine is equippedwith an integrated WiFi module. In order to use it you need: - a WiFi network - the Miele@mobile App - a Miele user account. The user ac- count can be created via theMiele@mobile App. The Miele@mobile App will guide youas ...

Before using for the first time 18 1. Remove the transit bars  Damage resulting from failure to remove the transit bars.Failure to remove the transit bars canresult in damage to the washing ma-chine and to adjacent cabinetry orappliances.Remove the transit bars as describedin “Installation and conn...

Before using for the first time 19 3. Commissioning TwinDos The TwinDos system can only be oper-ated with the Miele UltraPhase 1 andUltraPhase 2 detergent cartridges. It isnot possible to use any other detergentin the TwinDos system. The dispensing quantities forUltraPhase 1 and UltraPhase 2 are pre...

Before using for the first time 20 4. Starting the calibration pro-gramme For optimum water and energy con-sumption and excellent wash results, itis important to calibrate the washingmachine. To do this, the Cottons  programme must be run without laundry and without detergent.  Open the stopcock. ...

Washing environmentally and economically 21 Energy and water consumption - To get the most out of your machine, load the maximum dry load size forthe wash programme you are using.This will keep the energy and waterconsumption to a minimum in relationto the size of the load. - Programmes that are mor...

1. Prepare the laundry 22  Empty all pockets.  Damage due to foreign objects. Nails, coins, paper clips, and so oncan cause damage to garments andcomponents in the machine.Check the laundry before washingand remove any foreign objects. Sort the laundry  Sort the laundry by colour and bycare label...

2. Select a programme 23 Switching on the washing ma-chine  Turn the programme selector to aprogramme. 1. Selecting wash programmesusing the programme selector  Turn the programme selector to therequired programme. The programme running time appearson the time display. 2. Selecting programmes usin...

3. Load the washing machine 24 Open the door  Reach under the door grip and pullthe door open. Check the drum for pets or foreignobjects before loading it with laun-dry. The most efficient use of energy andwater is achieved when a full load iswashed. However, do not overload asthis reduces cleaning...

4. Select programme settings 25 Selecting a temperature andspin speed The wash programme’s preset tem-perature and spin speed light upbrightly. The choice of available tem-peratures and spin speeds for thewash programme light up dimmed. The temperatures reached inside thewashing machine might not be...

5. Add detergent 27 Degree of soiling of the laundry There are 3 different degrees of soil-ing. The quantity of detergent dispensedvia TwinDos and the quantity of waterrequired for rinsing are preset for the normal degree of soiling. - Light No visible soiling or stains - Normal Visibly soiled and/o...

5. Add detergent 28 Detergent dispenser drawer Any detergent suitable for automaticfront loading washing machines can beused. Please observe the instructionsfor use and dosage on the detergentpackaging. Adding detergent  Pull out the detergent drawer and adddetergent to the compartments.  Detergen...

5. Add detergent 30 CapDosing Three different types of capsule areavailable:  = Fabric care (e.g. fabric condi- tioner, proofing agent)  = Additives (e.g. detergent en- hancer)  = Detergent (for the main wash only) Each capsule contains the correctamount for one wash cycle. Caps are available to ...

6. Starting the programme 32 Starting a programme  Touch the flashing  Start / Add laundry sensor control. The door locks and the programmestarts. If a Delay start time has been selected,this counts down on the time display. Atthe end of the Delay start time or imme-diately after the programme has ...

Spinning 34 Final spin speed in wash pro-grammes When a programme is selected, thesensor control for the optimum spinspeed for that programme will bebrightly lit up in the control field. A faster spin speed can be selected forcertain wash programmes. The highest selectable spin speed is in-dicated i...

 Delay start/SmartStart 35 Delay start With the Delay start function, you candelay the start of the programme. This function is active when the  SmartGrid programmable function isswitched off. You can delay the start of a programmefrom 30 minutes up to a maximum of24 hours. This allows you to ma...

 Delay start/SmartStart 36 SmartStart The SmartStart function lets youdefine a time period during which yourwashing machine will start automatic-ally based on an external signal. Theappliance will start on receipt of a sig-nal, e.g. from your energy supplier,that indicates that the electricity tari...

Programme chart 37 ECO 40-60 Max. load 8.0 kg Items For normally soiled cotton garments Tip A laundry load consisting of mixed cottons that are intended forwashing at 40 °C or 60 °C can be washed in the same wash cycle. This programme is the most efficient in terms of energy and waterconsumption for...

Programme chart 38 Minimum iron Cold to 60 °C Max. load 3.5 kg Items Synthetic and mixed fibre textiles as well as easy care cotton Tip Reduce the spin speed for fabric that creases easily. Delicates Cold to 40 °C Max. load 2.0 kg Items Delicate garments made from synthetic fibre, mixed fibre and vi...

Programme chart 39 Dark garments/Denim Cold to 60 °C Max. load 3.0 kg Items Black and dark items made of cotton, mixed fibre or denim Tip - Wash inside out. - Denim often contains excess dye and may run during the first few washes. Therefore, wash light and coloured items separately. Shirts Cold to ...

Extra options 40 You can use the extra options buttonsto augment the wash programmes. Extra options are selected and deselec-ted using the relevant sensor buttonson the control field.  Touch the sensor button for the extraoption you require. The relevant sensor will light up brightly. Not all extra...

Garment care label symbols 41 Washing The figure quoted in the bucket is themaximum temperature the garmentcan be washed at. The number ofbars under the symbol indicates thelevel of agitation permitted.  No bar under the symbol:= normal agitation  One bar under the symbol:= reduced agitation  Two...

Programme sequence 42 Main wash Rinses Spinning Water level Wash rhythm Water level Rinses ECO 40-60    2–3 2  Cottons    2-4 1,2  Minimum iron    2-3 2  Delicates    2-3 2  Woollens     2  Express 20    1  Dark garments/Denim    3-4 2  Shirts    3  Proofing –   1 ...

Programme sequence 43  = low water level  = medium water level  = high water level  = intensive rhythm  = normal rhythm  = sensitive rhythm  = handwash rhythm  = carried out – = not carried out This washing machine has fully elec-tronic controls with automatic load con-trol. The washing mach...

Changing the programme sequence 44 Changing a programme (safetylock) A programme, temperature, spin speedor selected options cannot be changedonce the machine has been success-fully started. This prevents the machinebeing operated unintentionally, e.g. bychildren. If the washing machine is switched ...

Detergent 45 The correct detergent All detergents produced for automaticwashing machines are suitable. Followthe manufacturer's instructions anddosage recommendations on the pack-aging. For users in Asia:please use a low foaming detergentsuitable for use in front-loading ma-chines The right amount t...

Detergent 46 Recommended Miele detergents Miele detergents have been specially designed for day-to-day use in Miele wash-ing machines. See “Detergents and care products” for more information aboutthese detergents. Miele UltraPhase 1 and 2 Miele single-use capsules    ECO 40-60  –   Cottons  –...

Cleaning and care 48 Cleaning the external casingand the control panel  Risk of electric shock! Mains voltage is present when thewashing machine is switched offDisconnect the machine from theelectricity supply before cleaning ormaintenance.  Risk of damage due to ingress of water.The pressure of a...

Cleaning and care 49 Cleaning the siphon and the  /  compartment channel Liquid starch results in clogging. Ifclogged, the siphon in the  /  compartment will not work and thecompartment can overflow.Clean the siphon particularly thor-oughly after using liquid starch a fewtimes. 1. Remove the sip...

Cleaning and care 50 Hygiene info(Cleaning the drum) Washing at low temperatures and/or us-ing liquid detergent can cause bacteriaand unpleasant odours to build up inthe washing machine. Use the Cottons 90 °C programme to clean the washingmachine. Clean the drum no later thanthe point at which the  ...

Cleaning and care 51 TwinDos maintenance  Damage resulting from dried laundry detergent.If the system has not been used for along time (more than two months),detergent in the hoses can becomeviscous or dry out. The hoses canbecome blocked and would thenneed to be cleaned by a servicetechnician.Clea...

Problem solving guide 52 Many malfunctions and faults that can occur in daily operation can be easilyremedied. Time and money will be saved because a service call will not beneeded. The following guide may help you to find the reason for a malfunction or a fault,and to correct it. The programme does...

Problem solving guide 54 During the programme, a symbol appears in the time display Message Cause and remedy  lights up The programme selector was moved to a differentposition after the programme had started.  Turn the programme selector back to the originalposition. At the end of the programme,...

Problem solving guide 55 Messages or faults with the TwinDos system Problem Cause and remedy The Twin Dos whites  sensor control flashes. The UltraPhase 1 cartridge is empty.  Replace the UltraPhase 1 cartridge while thewashing machine is switched on. The TwinDos col- ours  sensor control flashes. ...

Problem solving guide 56 General problems with the washing machine Problem Cause and remedy The washing machinesmells. The  indicator light lighting up and  appearing on the time display was ignored. When washing, a washprogramme using a temperature above 60 °C has notbeen run for a long time.  I...

Problem solving guide 58 An unsatisfactory wash result Problem Cause and remedy Liquid detergent doesnot give the requiredresult. Liquid detergents usually contain no bleachingagents. They do not remove fruit, coffee and teastains.  Use the Miele 2 Phase System. The targeted addi-tion of UltraPhase...

Problem solving guide 59 The door will not open Problem Cause and remedy The door cannot bepulled open during aprogramme. The drum is locked during a programme.  Follow the description in “5. Starting a programme– Adding or removing laundry”. After the programme iscancelled, flashing bars  ... ...

Problem solving guide 60 Opening the door in the eventof a blocked drain outlet and/or power cut  Switch off the washing machine.  Open the drain pump access panel. Blocked drain outlet If the drain outlet is blocked, there maybe a large quantity of water left behindin the washing machine.  Risk ...

Problem solving guide 61  Clean the drain filter thoroughly.  Remove any foreign objects (e.g.,buttons, coins etc.) and clean the in-terior. Turn the impellers by hand tocheck that they rotate freely.  Replace the drain filter correctly andtighten it securely.  Close the drain pump access panel....

Service 62 Contact in the event of a fault In the event of any faults which youcannot remedy yourself, please contactyour Miele dealer or the Miele CustomerService Department. You can book a Miele Customer Ser-vice Department call-out online atwww.miele.com/service. Contact information for the Miele...

Installation *INSTALLATION* 63 Front view a Water inlet hose (pressure tested to7000 kPa) b Mains connection cable c Flexible drain hose (with detachableswivel elbow) d Control panel e Detergent dispenser drawer f Door g Access to drain filters, drain pumpsand emergency release h Access panel for Tw...

Installation *INSTALLATION* 64 Rear view a Drain hose b Transport clips for inlet and drainhoses and mains connection cable c Mains connection cable d Protruding lid for holding when mov-ing the machine e Water inlet hose (pressure tested to7000 kPa) f Safety caps for transit bars g Transport clips ...

Installation *INSTALLATION* 65 Installation surface A concrete floor is the most suitable in-stallation surface. It is far less prone tovibration during the spin cycle thanwooden floorboards or a carpeted sur-face. Please note:  The machine must be level and se-curely positioned.  To avoid vibrati...

Installation *INSTALLATION* 66 Removing the transit bars Removing the left-hand transit bar  Push the cover out and turn the left-hand transit bar 90° using the span-ner supplied.  Withdraw the transit bar. Removing the right-hand transit bar  Push the cover out and turn the left-hand transit bar...

Installation *INSTALLATION* 67 Covering holes  Risk of injury from sharp edges. There is a risk of injury from reachinginto holes that are not covered.Cover the holes for the transit barsafter they have been removed.  Push the covers in firmly until theyengage in position. Securing the transit bar...

Installation *INSTALLATION* 68 Fitting the transit bars Opening the covers  Press against the retainer with asharp object (a narrow screwdriver,for example). The cover opens. Fitting the transit bars  To fit the bars, follow the instructionsfor removing them in reverse order. Tip: The bars will sl...

Installation *INSTALLATION* 69 Levelling the machine The washing machine must stand per-fectly level on all four feet to ensuresafe and proper operation. Incorrect installation may increase elec-tricity and water consumption and maycause the machine to move about. Screwing out and adjusting the feet...

Installation *INSTALLATION* 70 Installing under a continuous work-top  Risk of electric shock due to ex- posed cablesThere is a risk of coming into contactwith live parts while the lid is re-moved.Building under kits* must only be in-stalled/dismantled by a suitably qual-ified fitter in accordance ...

Installation *INSTALLATION* 71 The water protection system The Miele water protection system pro-tects all parts of the washing machinefrom water damage. The system consists of three main com-ponents: - the inlet hose - the electronic unit and drainage and overflow protection - the drain hose Inlet ...

Installation *INSTALLATION* 72 Connection to the water supply  Health risk and risk of damage due to contaminated incoming water.The quality of the incoming watermust correspond to the drinking wa-ter specification of the country inwhich the washing machine is beingoperated.Always connect the washi...

Installation *INSTALLATION* 73 Water drainage The suds are drained through a drainpump with a 1 m delivery head. For thewater to drain freely, the hose must befree of kinks.If required, the hose can be extended toa length of up to 5 m. Accessories areavailable from Miele or from your Mieledealer. Fo...

Installation *INSTALLATION* 74 Electrical connection The washing machine is supplied withan electrical connection cable withmoulded plug ready for connection to aswitched socket. The socket must be easily accessibleafter the washing machine has been in-stalled. If that is not possible, ensurethat a ...

Technical data 76 Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Height for building under 820 (+8/-2) mm Width for building under 600 mm Depth for building under 600 mm Weight Approx. 85 kg Capacity 8.0 kg dry laundry Supply voltage See data plate Rated load See data plate Fus...

Technical data 77 Conformity declaration Miele hereby declares that this washing machine complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of thefollowing internet addresses: - Products, Download from www.miele.co.uk - For service, inform...

Consumption data 78 Load Energy Water Duration Residual moisture °C kg  kWh Litres h:min % Cottons  * 60 8.0 0.90 49 2:59 53 60 4.0 0.88 48 2:59 53 40 4.0 0.53 39 2:59 53 Cottons 90 8.0 2.10 49 2:29 53 60 8.0 1.35 49 2:29 53 60 4.0 1.15 48 2:19 53 40 8.0 0.98 54 2:39 53 20 8.0 0.35 54 2:39 53 Minim...

Consumption data 79 Note for test institutes * Test programme in accordance with EN 60456 and energy label with Directive 1061/2010 TwinDos dispensing must be deactivated when carrying out comparison tests.

Programmable functions 81 The programmable functions are usedto alter the machine's electronics tosuit changing requirements. Program-mable functions can be altered at anytime. The programming is carried out in eightsteps (  ,  ,  ...  ) using the sensor controls. Accessing the programming level...

Programmable functions 82 Editing and saving a program-mable function You can either switch a programmablefunction on/off or select different op-tions.  Touch the   or   sensor control to switch the programmable functionon/off or to select an option: Programmable function Available options  ...

Programmable functions 83  Lock code The lock code prevents the washingmachine being used without yourknowledge. When the code has been activated, youhave to enter a code after switching thewashing machine on. Otherwise thewashing machine cannot be operated. Options  = Lock code switched off (...

Programmable functions 84  Memory The washing machine will save thelast settings (temperature, spin speedand some of the extras) selected for aprogramme after the programme hasstarted. When this programme is chosen again,these saved settings will appear in thedisplay. Options  = Memory is swit...

Programmable functions 85  Maximum rinse level The water level in the rinse cycle canbe permanently set to the highestvalue. This function is useful for allergy suffer-ers as it achieves an excellent rinse res-ult. Water consumption will increase. Options  = Maximum rinse level is switched off...

Programmable functions 88 Networking The  ,  and  programmable functions are only displayed if the re-quirements for using Miele@homehave been met (see the “Before usingfor the first time” chapter,“Miele@home” section).  Remote control You can use the Miele@mobile app tocheck the status ...

Programmable functions 89  RemoteUpdate The RemoteUpdate function is used toupdate the software in your washingmachine. If an update is available foryour washing machine, it will automatic-ally download it. Updates will not be in-stalled automatically. They must be initi-ated manually. If you do ...

Programmable functions 90 Postponing the update After the washing machine is switchedon,  appears on the time display.  Touch the   sensor control. The running time of the selected pro-gramme appears on the time display. The next time you switch on the wash-ing machine, you will be prompted tost...

Detergents and care products 91 Detergent, fabric care, additives andmachine care products are available forthis washing machine. All the productshave been designed for Miele washingmachines. These and many other useful productscan be ordered via the internet atwww.miele.co.uk or from Miele (see end...

Detergents and care products 92 Specialist detergents   These specialist detergents are avail-able as convenient single-use capsules. Caps Sport - For synthetic fabrics - Neutralises odours thanks to built-in odour absorber - Prevents static charge in clothes - Retains the shape and breathability o...

Detergents and care products 93 Fabric care   These fabric care products are availableas convenient single-use capsules. Fabric conditioner cap - Fabric conditioner for freshly scented laundry - Pure and thorough cleanliness with a fresh scent - For soft, bouncy laundry - Prevents static charge in ...