Metra OESWC-6502-STK - Manuals

Metra OESWC-6502-STK – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - TOOLS REQUIRED FOR INSTALLATION; •Cutting Tool •Tape •Crimping Tool; *Important: Please check steering shroud before

TOOLS REQUIRED FOR INSTALLATION •Cutting Tool •Tape •Crimping Tool •Connectors (I.E. butt-connectors, bell caps, ECT…) • Female Spade Connectors IGNITIO N TERMINALS WIRE CUTTER M 3.5 M 2.6 M 3 M 5 M 4 IS O 6 2.5 1.5 *Important: Please check steering shroud before drilling to make sure you have enoug...

Page 3 - ASWCSTALK ASSEMBLY

ASWCSTALK ASSEMBLY 1. Remove and drill a 3/8 hole in the steering wheel shroud. 2. Select desired length rod and thread a 3/8 hex nut on to the shorter threaded section. 3. Run the four wires from the ASWCSTALK through the rod of choice and screw it into the ASWCSTALK 4. Take the twist on cover, run...

Page 5 - Troubleshooting the Auto Detect Mode

8. Make sure the steering wheel control buttons function correctly in the vehicle and enjoy your radio. If the ASWCSTALK is mounted on the right side of the steering column follow the instructions below. (Auto-detect must be done first) 1. Turn the ignition on 2. Press the MODE on the ASWCSTALK for ...

Metra Manuals