Metra 99-3051 - Manual
Metra 99-3051 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
- Page 3 – DASH DISASSEMBLY
- Page 5 – KIT ASSEMBLY; ISO MOUNT RADIO WITH POCKET
- Page 6 – DOUBLE DIN RADIO PROVISION
- Page 7 – FINAL ASSEMBLY; METRA / EIA WIRING CODE
INSTALLATION INSTRUCTIONS FOR PART 99-3051
Phillips Screwdriver • Rotary Cutting Tool
1-800-221-0932 www.metraonline.com
KIT FEATURES
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
• ISO mount Radio Provision with Pocket
• Two ISO Mount Unit’s Provision
• Double DIN Radio Provision
( A) Pocket • ( B) Brackets • ( C) Trim Plate • ( D) (4) #6 X 1/4” Phillips Head Screws • (E) (2) #8 X 3/8” Phillips Head Screws
KIT COMPONENTS
TOOLS REQUIRED:
99-3051
A
C
D
E
APPLICATIONS
Chevrolet Corvette
1990-1996
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• 70-1856 - 17ft bypass harness (Non-Bose) 1989-1996
• 70-1857 - 17ft bypass harness (Bose) 1989-1996
Antenna Adapter:
• Not required
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly 1990-1996 Chevrolet Corvette . . . . . . . . . . . . . . . . . . . . . . . . . .1, 2 Kit Assembly ISO Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . 3 Double DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Two ISO Mount Unit’s...
99-3051 1 Disconnect the negative battery terminal to prevent an accidentalshort circuit. 1 Remove (2) screws from center ACvent and remove vent. (Figure A) 2 1990-1996 CHEVROLET CORVETTE Remove rubber inserts in cup hold-ers and remove screw. (Figure B) 3 Remove (2) screws from under carpetinside c...
99-3051 KIT ASSEMBLY Mount the pocket trim-plate to thepocket using the (2) #8x3/8” Phillipshead screws provided with kit.Larger lip towards top of pocket. (Figure A) 1 Continue to final assembly. 4 Align the mounting holes in thebrackets with the mounting holes inthe side of the radio and mount the...
