Metra 99-8218 - Manuals

99-8218 KIT ASSEMBLY 4 B C A 1 Mount the ISO Brackets to theradio with the screws suppliedwith the radio. ( Figure A) 2 Slide the radio into the radio open-ing until the side clips engage.( Figure B) 4 Snap the pocket into the radiohousing. ( Figure B) NOTE: Refer also to the instructions included w...

99-8218 KIT ASSEMBLY 5 B C A 1 Cut and remove center dividerfrom radio housing. ( Figure A) 2 Snap the Double DIN brackets to theinside edge of the radio housing.( Figure B) 3 Slide the Double DIN radio into theDouble DIN bracket/radio housingassembly and secure the radio to theassembly using the sc...

99-8218 KIT ASSEMBLY 6 B C A 1 Cut and remove center dividerfrom radio housing. ( Figure A) 2 Snap the Double DIN brackets to theinside edge of the radio housing.( Figure B) 3 Slide the Stacked ISO units into theDouble DIN bracket/radio housingassembly and secure the radio to theassembly using the s...

7 99-8218 FINAL ASSEMBLY FINAL ASSEMBLY 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative b...