Metra 99-7509 - Manual
Metra 99-7509 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents; Dash Disassembly; – DIN radio provision with pocket; Caution
- Page 3 – Continued on next page
- Page 4 – Unclip and remove the center console
- Page 5 – Unclip and pull the center console; Note: You do not have to remove the; bottom of the radio trim panel then
- Page 6 – DIN radio provision with pocket
- Page 7 – ISO mount radio provision with pocket; Countinue to next page
- Page 8 – Snap the pocket into the radio housing.
- Page 9 – Double DIN/Stacked ISO units provision
- Page 10 – Notes
- Page 12 – REV
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
APPLICATIONS
1-800-221-0932
metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-7509
Small Flat Blade Screwdriver • Panel Removal Tool • Phillips Screwdriver
TOOLS REQUIRED
Mazda 5 2006-up
(with manual climate controls)
99-7509
B
E
C
F
A
D
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• C) Double DIN Trim Plate • D) Snap In Pocket
KIT FEATURES
KIT COMPONENTS
• Painted to match factory dash
• DIN radio provision with pocket
• ISO radio provision with pocket
• Double DIN radio provision
• Stacked ISO mount units provision
WIRING & ANTENNA CONNECTIONS
(Sold Separately)
Wiring Harness: •70-7903 - Mazda Harness 01-up
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Table of Contents Dash Disassembly – 2006-up Mazda 5 3-5 Kit Assembly – DIN radio provision with pocket 6 – ISO mount radio provision with pocket 7-8 – Double DIN/stacked ISO DIN head unit provision 9 K NOWLEDGE IS P OWER E nhance your installation and fabrication skills by enrolling in the most rec...
1. Remove the shifter. (Figure A) 2. Remove (2) Phillips screws exposed below shift lever trim panel. (Figure B) Continued on next page 3 Dash Disassembly 99-7509 P R N M-D A/C A/C (Figure A) (Figure B)
4 99-7509 Dash Disassembly 3. Unclip and remove the center console side trim panels then remove (1) Phillips screw per side behind panels. (Figure C,D). Continue to next page (Figure C) (Figure D)
