Metra 99-7509 - Manuals - manualsarea.com

Page 2 - Table of Contents; Dash Disassembly; – DIN radio provision with pocket; Caution

Table of Contents Dash Disassembly – 2006-up Mazda 5 3-5 Kit Assembly – DIN radio provision with pocket 6 – ISO mount radio provision with pocket 7-8 – Double DIN/stacked ISO DIN head unit provision 9 K NOWLEDGE IS P OWER E nhance your installation and fabrication skills by enrolling in the most rec...

Page 3 - Continued on next page

1. Remove the shifter. (Figure A) 2. Remove (2) Phillips screws exposed below shift lever trim panel. (Figure B) Continued on next page 3 Dash Disassembly 99-7509 P R N M-D A/C A/C (Figure A) (Figure B)

Page 4 - Unclip and remove the center console

4 99-7509 Dash Disassembly 3. Unclip and remove the center console side trim panels then remove (1) Phillips screw per side behind panels. (Figure C,D). Continue to next page (Figure C) (Figure D)

Page 5 - Unclip and pull the center console; Note: You do not have to remove the; bottom of the radio trim panel then

5 99-7509 Dash Disassembly 4. Unclip and pull the center console towards the rear of the vehicle. Note: You do not have to remove the center console completely. (Figure E ) 5. Remove (2) Phillips screws at the bottom of the radio trim panel then unclip the panel including the factory radio. Unplug a...

Page 6 - DIN radio provision with pocket

Kit Assembly 99-7509 6 DIN radio provision with pocket (Figure A) (Figure B) (Figure C) 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Slide t...

Page 7 - ISO mount radio provision with pocket; Countinue to next page

Kit Assembly 99-7509 7 ISO mount radio provision with pocket (Figure A) (Figure B) (Figure C) 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. M...

Page 8 - Snap the pocket into the radio housing.

Kit Assembly 99-7509 8 ISO mount radio provision with pocket (Figure D) 6. Snap the pocket into the radio housing. (Figure D) 7. Reassemble dash in reverse order of disassembly.

Page 9 - Double DIN/Stacked ISO units provision

Kit Assembly 99-7509 9 Double DIN/Stacked ISO units provision (Figure A) (Figure B) (Figure C) 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. ...

Page 10 - Notes

Page 12 - REV