Metra 99-7603 - Manual
Metra 99-7603 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 5 – DIN MOUNT RADIO PROVISION
- Page 6 – ISO MOUNT RADIO PROVISION
- Page 7 – DOUBLE DIN MOUNT RADIO PROVISION
- Page 8 – STACKED ISO UNITS PROVISION
- Page 9 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS
- Page 10 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 99-7603
99-7603
APPLICATIONS
Nissan Versa
2007-201
1
KIT FEATURES
• DIN Mount Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Mount Radio Provision
• Stacked ISO Mount Units Provision
A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) Double DIN Trim Plate
Harness & Antenna Connections (sold separately)
• 70--7552 - Nissan Harness 07-up
• 40-NI12 - Nissan Adapter 07-up
KIT COMPONENTS
A
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
D
C
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - Nissan Versa 2007-201 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,2 Kit Assembly - DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . 3 - ISO Mount Radio Provision with Pocket. . . . . . . . . . . . . . . . . . . . . . . . 4 - Doubl...
99-7603 KIT ASSEMBLY 3 A B DIN MOUNT RADIO PROVISION Slide the DIN cage into the RadioHousing and secure by bending themetal locking tabs outward. (Figure A) Note: You will need to remove the aftermarket radio’s trim ring ifequipped. 1 Slide the aftermarket radio into thecage until it snaps into pla...
99-7603 KIT ASSEMBLY 4 FRONT FACE-RIGHT SIDEBRACKET A B C ISO MOUNT RADIO PROVISION Mount the ISO Brackets to the after-market radio using the screws sup-plied with the radio. (Figure B) 1 Note: The following modification will need to be made to both ISO brackets when using the ISOmount radio provis...
