Metra 99-7610B - Manual
Metra 99-7610B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; Caution; INSTALLATION INSTRUCTIONS FOR PART 99-7610
- Page 3 – Continue to kit assembly.
- Page 5 – DIN HEAD UNIT PROVISION
- Page 6 – Figure A; ISO MOUNT RADIO PROVISION; Nissan Versa
- Page 8 – DOUBLE DIN MOUNT RADIO PROVISION
- Page 9 – NOTES
- Page 12 – REV
INSTALLATION INSTRUCTIONS FOR PART 99-7610
99-7610B
99-7610HG
2007-up
Nissan Versa
2011 Nissan Juke
KIT FEATURES
• DIN head unit provisions with pocket
• ISO DIN head unit provision with pocket
• Double DIN mount radio provision
•
B = Matte Black
• HG = Gloss Black
• 70-7552 - 2007-up Nissan Harness
• 40-NI12 - 2007-up Nissan Antenna Adapter
KIT COMPONENTS
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
A
TOOLS REQUIRED:
Panel Removal Tool • Phillips Screwdriver
Socket Wrench
1-800-221-0932
© COPYRIGHT 2011 METRA ELECTRONICS CORPORATION
metraonline.com
B
D
C
A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) DDIN Trim Plate
METRA. THE WORLD’S BEST KITS.
™
APPLICATIONS
INSTALLATION INSTRUCTIONS FOR PART 99-7610
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - Nissan Versa 2007-up..............................................................................1 - Nissan Juke 2011.................................................................................... 2 Kit Assembly - DIN Mount Radio Provision with Pocket ..........................
VOL CD LOAD SCRL AUDIO SCAN CAT CH AUX 6CD CHANGER RPT RDM DISP CLOCK RADIO PRESET A-B-C SEEK TRACK FILE TUNE FF-REW FOLDER PWR PUSH 1 2 3 4 5 6 1 1. Unclip and remove the panel above the radio. (Figure A, B) 2. Remove (2) Phillips screws securing the radio trim panel then unclip and remove the enti...
3 Note: You will need to remove the after-market radio’s trim ring if equipped. 1. Cut and remove the appropriate tabs not necessary for your application. (Figure A) 2. Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure B) 3. Slide the aftermarket he...
