Metra Automobile Parts - Manuals

Metra Automobile Parts – Manual in PDF format online.

Manuals:

Manual Metra Automobile Parts

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16

Summary

Page 2 - TOOLS REQUIRED FOR INSTALLATION; •Cutting Tool •Tape •Crimping Tool; *Important: Please check steering shroud before

TOOLS REQUIRED FOR INSTALLATION •Cutting Tool •Tape •Crimping Tool •Connectors (I.E. butt-connectors, bell caps, ECT…) • Female Spade Connectors IGNITIO N TERMINALS WIRE CUTTER M 3.5 M 2.6 M 3 M 5 M 4 IS O 6 2.5 1.5 *Important: Please check steering shroud before drilling to make sure you have enoug...

Page 3 - ASWCSTALK ASSEMBLY

ASWCSTALK ASSEMBLY 1. Remove and drill a 3/8 hole in the steering wheel shroud. 2. Select desired length rod and thread a 3/8 hex nut on to the shorter threaded section. 3. Run the four wires from the ASWCSTALK through the rod of choice and screw it into the ASWCSTALK 4. Take the twist on cover, run...

Page 4 - Wiring Of ASWCSTALK And Interface

Wiring Of ASWCSTALK And Interface 1. Connect the BLACK wires of the ASWCSTALK and the BLACK wire of the interface to ground. You may use the same ground point that is used for the radio. 2. Connect the GREEN/ORANGE and BLACK/GREEN wires of the ASWCSTALK to the corresponding wires on the interface. 3...

Metra Manuals