Metra 99-7875 - Manuals

99-7875/99-7875T KIT ASSEMBLY 4 A B C DIN MOUNT RADIO PROVISION WITH POCKET Slide the DIN cage into the RadioHousing and secure by bending themetal locking tabs outward. (Figure A) 1 Slide the aftermarket radio into theDIN cage until it snaps into place. (Figure B) 2 Snap the pocket into the radio h...

99-7875/7875T KIT ASSEMBLY 5 A B C ISO MOUNT RADIO PROVISION WITH POCKET Mount the ISO Brackets to the radiousing the screws supplied with theradio. (Figure A) 1 Slide the radio into the Radio Housinguntil it snaps into place. (Figure B) 2 Snap the Trim Plate onto the front ofthe Radio Housing. (Fig...

99-7875/99-7875T KIT ASSEMBLY 6 DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION Cut and remove the center bar fromthe Radio Housing. (Figure A) 1 Snap the Double DIN brackets to theinside edge of the Radio Housing. (Figure B) 2 Slide the Double DIN or stacked ISOmount units into the bracket/radiohousin...

99-7875/99-7875T FINAL ASSEMBLY FINAL ASSEMBLY (A) Strip wire ends back 1/2" B) Twist ends together C) Solder D) Tape A B C D Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ-ually tape off the e...