Metra 99-7423 - Manuals

4 99-7423 KIT ASSEMBLY B A ISO MOUNT RADIO PROVISION WITH POCKET Mount the ISO Brackets to the radiowith the screws supplied with theradio. (Figure A) 1 Slide the radio into the radio housinguntil it snaps into place. (Figure B) 2 Attach the radio housing trim platesupplied with the kit to the assem...

5 99-7423 KIT ASSEMBLY B C A DOUBLE DIN RADIO PROVISION Snap the Double DIN brackets to theinside edge of the radio housingassembly. (Figure B) 2 1 Slide the Double DIN radio into thebracket/radio housing assembly andsecure the radio to the assembly usingthe screws supplied with the radio. (Figure C...

6 99-7423 KIT ASSEMBLY B C A STACKED ISO UNITS PROVISION Snap the Double DIN brackets to theinside edge of the radio housingassembly. (Figure B) 2 Slide the stacked ISO units into thebracket/radio housing assembly andsecure the units to the kit using thescrews supplied with the units. (Figure C) 3 C...

99-7423 FINAL ASSEMBLY FINAL ASSEMBLY (A) Strip wire ends back 1/2" B) Twist ends together C) Solder D) Tape A B C D Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ-ually tape off the ends of an...