Metra 99-6510 - Manuals

99-6510 DASH DISASSEMBLY 5 DODGE RAM 1500 2006-2008 Disconnect the negative battery terminalto prevent an accidental short circuit. Remove center console inserts, if present.( Figure A) 1 3 Unclip and remove entire panel sur-rounding radio and climate controls,including a/c vents. ( Figure E) 8 Remo...

99-6510 DASH DISASSEMBLY 6 Disconnect the negative battery terminalto prevent an accidental short circuit. Unsnap and remove console front topcover (closest to the dash). ( Figure A) 1 3 Unclip and remove entire panel surroundingradio and climate controls, including a/cvents. ( Figure D) 7 Remove (4...

10 99-6510 KIT ASSEMBLY Slide the DIN cage into the radiohousing and secure by bending themetal locking tabs down. (Figure A) 1 Slide the aftermarket radio into thecage until secure. (Figure B) 2 Snap the pocket into the radiohousing. (Figure C) 3 DIN RADIO PROVISION WITH POCKET A B C Continue to fi...

11 99-6510 KIT ASSEMBLY Mount the ISO Brackets to theradio with the screws suppliedwith the unit. (Figure A) 1 Slide the radio into the radioopening until the side clipsengage. (Figure B) 2 Snap the ISO Trim Plate into theradio housing. (Figure C) 3 Snap the pocket into the radio housing. (Figure C)...

12 99-6510 KIT ASSEMBLY Snap the DDIN brackets to theinside edge of the radio housing. (Figure B) 2 Snap the DDIN trim-plate onto thehousing/radio assembly. (Figure D) 4 Cut and remove center divider inradio housing. (Figure A) 1 Slide the DDIN radio unit into theDDIN bracket/radio housingassembly a...

13 99-6510 KIT ASSEMBLY Cut and remove center divider inradio housing. (Figure A) 1 Snap the DDIN brackets to theinside edge of the radio housing. (Figure B) 2 Slide the stacked ISO DIN radiounits into the DDIN bracket/radiohousing assembly and secure theunit to the kit using the screwssupplied with...

14 99-6510 FINAL ASSEMBLY FINAL ASSEMBLY 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative ...