Metra 95-3302 - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS; Saturn; NOWLEDGE IS

Dash Disassembly Chevrolet - Cobalt 2005-2010 . . . . . . . . . . . . . . . .1 - Equinox 2005-2006 . . . . . . . . . . . . . 2 - HHR 2006-2010. . . . . . .. . . . . . . . . . . . 3 - Malibu 2004-2007 . . . . . . . . . . . . . . .4,5 - Malibu 2008-2010 . . . . . . . . . . . . . . . .6 Pontiac - G5 20...

Page 6 - isconnect the negative battery ter-

4 95-3302 DASH DISASSEMBLY Chevrolet Malibu 2004-2007 D isconnect the negative battery ter- minal to prevent an accidental shortcircuit. 1 Unclip and remove wood grain/paint-ed trim pieces from both sides ofsteering wheel. (Figure A) 2 Unclip and remove side panel fromdriver’s side of dash with door...

Page 7 - Continue to kit assembly

5 95-3302 DASH DISASSEMBLY Chevrolet Malibu 2004-2007 Remove (2) 7 MM screws from bot-tom of glove box then open box andsqueeze sides together to open fur-ther and remove the remaining (4)7MM screws. Unclip the black ventcover under the glove box then unclipand remove entire glove box assem-bly. (Fi...

Page 8 - sconnect the negative battery

6 95-3302 DASH DISASSEMBLY Chevrolet Malibu 2008-2010 Remove (2) 8 mm screws from bottom of radio/climate panel. 3 Remove (6) 8 mm screws from radio and climate controls. 5 Unsnap and remove the climate/radiopanel and upper vent trim paneltogether. (They can be separated afterremovel) ( Figure B,C) ...

Page 10 - Automatic transmission:

8 95-3302 DASH DISASSEMBLY Pontiac Solstice 2006-2009 D isconnect the negative battery ter- minal to prevent an accidental shortcircuit. 1 A. Lift up the lower edge of the instrument panel cluster trim plateenough to reach underneath andrelease the shift boot trim ringretaining tabs. (Figure A) B. L...

Page 15 - DOUBLE DIN MOUNT RADIO PROVISION; Continue to final assembly

95-3302 KIT ASSEMBLY A B C DOUBLE DIN MOUNT RADIO PROVISION Slide the appropriate bracket into the trimplate aligning the holes in the trim plate tothe clips on the bracket. (Figure A) 1 Slide the DDIN radio unit into the trim platebracket assembly and secure the unit to thekit using the screws supp...

Page 16 - STACKED ISO MOUNT RADIO PROVISION

95-3302 KIT ASSEMBLY 14 STACKED ISO MOUNT RADIO PROVISION Slide the appropriate bracket into the trimplate aligning the holes in the trim plate tothe clips on the bracket. (Figure A) 1 Slide the stacked ISO DIN units into the trimplate bracket assembly and secure the unitsto the kit using the screws...

Page 17 - FINAL ASSEMBLY; B) Twist ends together; FINAL WIRING CONNECTIONS; METRA / EIA WIRING CODE

95-3302 FINAL ASSEMBLY FINAL ASSEMBLY (A) Strip wire ends back 1/2" B) Twist ends together C) Solder D) Tape A B C D Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ-ually tape off the ends of an...

Page 18 - NOTES