Makita HS301DWAE - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; Symbols; Intended use; Noise

2 ENGLISH SPECIFICATIONS Model: HS301D Blade diameter 85 mm Max. Cutting depth at 0° 25.5 mm at 45° 16.5 mm No load speed 1,500 min -1 Overall length 313 mm 331 mm Rated voltage D.C. 10.8 V - 12 V max Battery cartridge BL1016, BL1021B BL1041B Net weight 1.6 kg 1.8 kg • Due to our continuing program ...

Page 3 - General power tool safety warnings; Save all warnings and instruc-

3 ENGLISH General power tool safety warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instruc- tions for future reference. The term "power tool" in t...

Page 4 - Cordless circular saw safety

4 ENGLISH coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery termi- nals together may cause burns or a fire. 4. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If con- tact accidental...

Page 6 - Important safety instructions for; SAVE THESE INSTRUCTIONS.; Tips for maintaining maximum; FUNCTIONAL; Installing or removing battery

6 ENGLISH 7. Some material contains chemicals which may be toxic. Take caution to prevent dust inhala- tion and skin contact. Follow material supplier safety data. 8. Do not stop the blades by lateral pressure on the saw blade. 9. Do not use any abrasive wheels. 10. Only use the saw blade with the d...

Page 7 - Battery protection system; Adjusting depth of cut

7 ENGLISH 1 2 3 1. Red indicator 2. Button 3. Battery cartridge To remove the battery cartridge, slide it from the tool while sliding the button on the front of the cartridge.To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into p...

Page 8 - Bevel cutting; ASSEMBLY

8 ENGLISH move the base up or down. At the desired depth of cut, secure the base by tightening the clamping screw. For cleaner, safer cuts, set cut depth so that no more than one blade tooth projects below workpiece. Using proper cut depth helps to reduce potential for danger- ous KICKBACKS which ca...

Page 9 - Hex wrench storage

9 ENGLISH Removing or installing circular saw blade 1 2 1. Shaft lock 2. Hex wrench CAUTION: Be sure the circular saw blade is installed with teeth pointing up at the front of the tool. CAUTION: Use only the Makita wrench to install or remove the circular saw blade. To remove the circular saw blade,...

Page 10 - Connecting a vacuum cleaner; OPERATION

10 ENGLISH Connecting a vacuum cleaner Optional accessory 1 2 1. Dust nozzle (optional accessory) 2. Screw (optional accessory) When you wish to perform clean cutting operation, connect a Makita vacuum cleaner to your tool. Install the dust nozzle (optional accessory) on the tool using the screw. Th...

Page 11 - MAINTENANCE; OPTIONAL

11 MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. CAUTION: Clean out the upper and lower guards to ensure there is no accumulated saw- dust which may impede the operation of the lower guar...