Jet 708404 - Manuals - manualsarea.com

Page 2 - Warranty and Service

2 Warranty and Service JET, Wilton and Powermatic warrants every product they sell against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday Warranty Period The general warranty lasts...

Page 3 - Table of Contents

3 Table of Contents Warranty and Service ............................................................................................................................................ 2 Table of Contents ...................................................................................................

Page 6 - Unpacking and Setup; Contents of the Shipping Container; Spindle and Insert Storage Plates

6 Unpacking and Setup Contents of the Shipping Container (see Figure 1) 1 Spindle Sander 1 Spindle Storage Plate (pre-installed) 1 Insert Storage Plate (pre-installed) 2 Round Opening Inserts (3/4” and 2”) 2 Oblong Opening Inserts (3/4” and 2”) 5 Sanding Spindles & Sleev es (all 100 Grit): 1/4”x...

Page 7 - Insert Plates; Setup for 90°; Setup for Bevel Sanding; Dust Collection

7 Insert Plates 1. Always use an insert plate. 2. There are 2 oblong, and 2 round insert plates included with the machine. The oblong insert plates are used when the table is tilted for bevel sanding. Each plate has a notch on the outer edge to ensure that it is inserted properly. (See page 9 to det...

Page 8 - Turning the Sander On & Off; Removing Spindles

8 Turning the Sander On & Off Note: Before hooking the sander to the power source, make sure the switch is in off position. The sander can be turned on by flipping the switch to the on position. There is a removable key in the tip of the switch that can be removed in the off position. W hen the ...

Page 9 - Insert Plate Diameters

9 Insert Plate Diameters This will assist you in determining which spindle diameters will work in each insert plate.

Page 10 - Optional Accessories; Replacement Parts

10 Optional Accessories (purchased separately) 709534 ...... 3” Dia. Spindle Assembly 6286984 .... Table Insert for 3” Spindle Sanding Sleeves (4 per pack): Stock No. Diameter (in.) Length (in.) Grit 575891 1/4 6 60 575893 1/4 6 100 575894 1/4 6 150 575901 1/2 6 60 575903 1/2 6 100 575904 1/2 6 150 ...

Page 11 - Table Assembly for the JBOS-5

Page 12 - Base and Motor Assembly for the JBOS-5

Page 13 - Parts List for the JBOS-5; Description

13 Parts List for the JBOS-5 Index No. Part No. Description Size Qty 1 ................ 6286914W ................. Base......................................................................... ...................................... 1 2 ................ 6286891 .................... Top Plate ...........