Jet 577102 - User Manual - manualsarea.com

Page 2 - Warranty and Service

2 Warranty and Service JET warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period sp...

Page 3 - Table of Contents

3 Table of Contents Warranty and Service .............................................................................................................................. 2 Table of Contents .................................................................................................................

Page 7 - Unpacking; Contents of the Shipping Container

7 Unpacking Separate all parts from the packing material. Check each part against the Contents of the Shipping Container and make certain that all items are accounted for before discarding any packing material. Contents of the Shipping Container 1 Bench Grinder (not shown) 1 Hardware (contents liste...

Page 8 - Assembly

8 Assembly Your bench grinder requires only the assembly of the eye shields and tool rests. For your safety, do not plug the grinder into a power source until all adjustments are complete. An adjustable wrench and a Phillips screwdriv er are the only tools you will need to make all normal adjustment...

Page 10 - Electrical; Electrical Requirements; Electrical Connections; Extension Cords

10 Electrical Electrical Requirements When connecting the bench grinder to the power source outlet, the outlet must be properly grounded to protect the operator from electrical shock. In the ev ent of a malfunction or breakdown, grounding prov ides a path of least resistance for electrical current t...

Page 11 - Operation; Switch; Precautions; Adjustments; Eye Shield Tilt Adjustment

11 Operation A bench grinder is designed for hand-grinding operations such as sharpening chisels, screwdriv ers, drill bits, removing excess metal, and smoothing metal surfaces. A Medium Grain Abrasive Grinding Wheel is suitable for rough grinding where a considerable amount of metal must be removed...

Page 12 - Maintenance; Ring Test

12 Maintenance For safety, turn the switch to OFF and remove plug from the power source outlet before adjusting and maintaining the bench grinder. If the power cord is worn, cut or damaged in any way, hav e it replaced immediately. Ring Test Before replacing a grinding wheel, perform this simple tes...

Page 13 - Lubrication

13 Grinding Wheels The JET Series bench grinders come equipped with general purpose grinding wheels. Wheels vary according to types of abrasive, hardness, grit size, and structure. JET carries a full line of abrasiv e grinding, carbide grinding, tool sharpening, and wire wheels. Contact your local d...

Page 14 - Troubleshooting

14 Troubleshooting Problem Probable Cause Remedy Motor will not start Not plugged into receptacle Plug it into the power source receptacle Switch not in the ON position Turn the switch to the ON position Motor cord cut or abraded Replace with a new cord Plug on cord is faulty Replace with a new plug...

Page 15 - Parts and Assembly for JBG Series Grinders; Parts List

15 Parts and Assembly for JBG Series Grinders Parts List Index No Part No Description Size Qty 1 ............... JBG6A-02P ..............Shaft and Rotor Assembly ..................................................................... 1 ................. JBG8A-02P ..............Shaft and Rotor Assembly...

Page 18 - Assembly Drawing

Page 19 - Wiring Diagram

Page 20 - Ordering Replacement Parts

20 Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model Number and Serial Number of your machine available when you call will allow us to serv e you quickly and accurately. 427 New Sanford R...

Jet 577102 - User Manual

Table of Contents:

Summary

Other Jet Grinding Machines Models