Jet 22-44 Plus - Manual
Jet 22-44 Plus – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – WARNING; Not Recommended
- Page 4 – ALWAYS feed stock against the rotation of the drum.
- Page 5 – Grounding Instructions
- Page 6 – Selecting SANDSMARTTM Feed Rates
- Page 7 – Contents of the Shipping Cartons; Read and understand the entire contents of; Unpacking
- Page 8 – Assembly and Setup; holes in the base of drum assembly.; Drum Height Control
- Page 9 – in front and two in back.
- Page 10 – Mark and cut a taper at one end of the roll,
- Page 12 – until it touches the conv eyor.; Setting the Depth of Cut; Abrasiv e type and grit size.; Establishing the Proper Drum Height
- Page 13 – Grit Common
- Page 16 – Conveyor Belt Replacement; and replace with a new belt.; Tension Roller Alignment; the lowest position.; Tension Roller Pressure Adjustment; Thoroughly lubricate the mating surfaces
- Page 17 – Troubleshooting Guide; Cause
- Page 18 – Drum Head Assembly
- Page 19 – Description
- Page 21 – Conveyor And Motor Assembly
- Page 23 – Wiring Diagram
OWNER'S MANUAL
22-44 Plus Drum Sander
(shown with optional accessories)
WMH TOOL GROUP
Consumer/Light Industrial Products Division
P.O. BOX 1349
Auburn, WA 98071-1349
Ph: 1-800-274-6848
▪
Fax: 1-800-274-6840
E-mail: [email protected]
www.wmhtoolgroup.com
M-649003K 5/03
Copyright © WMH Tool Group
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 WARNING Wear eye protection. Always keep guards in place and in proper operating condition. Do not operate the machine without the guards for any reason. This sander is intended to be used with wood and wood products only. Use of this sander and a dust collector with metal products is a potential ...
4 • ALWAYS DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE SERVICING. • REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure the switch is in the off position before plugging in. • USE RECOMMENDED ACCESSORIES. The use of accessories and attachments not recommended by JET may cause hazards or ris...
5 Grounding Instructions Caution: This tool must be grounded while in use to protect the operator from electric shock. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an el...
