Honeywell 1101 - Manuals

Honeywell 1101 – Installation Manual, User Manual, Manual in PDF format online.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 2 - DIMENSIONS; CONNECTION WIRING

PW SERIES CONDUIT WET PRESSURE TRANSMITTERS 31-00539-01 2 DIMENSIONS Figure 1. Housing Dimensions CONNECTION WIRING Honeywell recommends 22 AWG stranded, and four conductor shielded cable to wire between the PWTB transmitter and pressure sensors. Terminals are rated for 24-14 AWG, 3.5 lb-in of torqu...

Page 3 - SENSOR A; OUTPUT

PW SERIES CONDUIT WET PRESSURE TRANSMITTERS 3 31-00539-01 IMPORTANT DO NOT attempt to plumb or tighten the sensors while wires are attached, as you risk pulling wires from cable attachments. 8. Wire sensors A & B to the PWTB Transmitter terminals labeled A & B respectively. See the table in ...

Page 4 - CALIBRATION

PW SERIES CONDUIT WET PRESSURE TRANSMITTERS 31-00539-01 4 15. Check remaining DIP switch (8-12) configurations for additional setup options: Display Units: LCD will display readings in PSI or kPa. LCD will indicate PSI or kPa at the top of the screen. UNI/BI: PWTB transmitter can be set up in Uni or...

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12

Summary

Page 2 - Before Use / Unlocking and Opening Chest /; For Your Protection; • Record all Safe Identification Numbers on Chest Identification; Index

Welcome / Package Contents / Do Not Return Safe to Store ................ Page 1 Product Overview / How to Store Chest .................................................. Page 2 Before Use / Unlocking and Opening Chest / Always Open Lid Completely ........................................................

Page 3 - Attention: DO NOT RETURN SAFE TO STORE; WELCOME

The following list outlines the items and quantities of each included with your new chest. Please carefully check the list to confirm all items have been received. If any items are missing, please contact Consumer Assistance. (See page 7 for contact information). Security Chest (1 ea.)Operation Manu...

Page 4 - PRODUCT OVERVIEW; A B

For your chest to perform as specified, it must always be stored flat with the lid on top. Never store the chest on any of the sides or upside-down. WRONG RIGHT EXTERIORA - Compression LatchesB - Chest LidC - Lock AssemblyD - Chest BodyE - Latch Buttons (All Models except 1101)F - Handle (All Models...

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Honeywell Manuals