Honeywell T6 PRO Z-WAVE PROGRAMMABLE THERMOSTAT - Manual
The installation and setup guide for the Honeywell Home T6 Pro Z-Wave programmable thermostat covers essential topics like system compatibility, wiring configurations for both conventional HVAC and heat pump setups, mounting instructions, power options, and advanced installer setup parameters. This manual emphasizes detailed wiring diagrams for different HVAC types–such as forced air, hydronic, and heat pump systems–and explains terminal functions (e.g., power, compressor contactor) alongside safety warnings. It also includes installation-specific steps like mounting the UWP (Universal Wiring Panel) or optional decorative cover plates, along with battery/AC power setup instructions. Additionally, it provides configuration guidance for Z-Wave network integration, system mode settings (heat/cool/fan), scheduling options, and troubleshooting alerts, ensuring both professional installers and users can navigate thermostat operation effectively.
Table of Contents:
- Page 1 – Professional Installation Guide and Resources
- Page 2 – Thermostat Capabilities and Safety Warnings
- Page 3 – Mounting System Installation Instructions
- Page 4 – Power Setup and Wiring Configuration
- Page 5 – Terminal Designation and Wiring Reference
- Page 6 – Wiring Configurations for Conventional HVAC Systems
- Page 7 – Wiring Configurations for Heat Pump Systems
- Page 8 – Physical Installation and Initial Setup
- Page 9 – Z-Wave Network Management
- Page 10 – Advanced Temperature Reporting and Status Interpretation
- Page 11 – System Mode and Fan Control Settings
- Page 12 – Scheduling Configuration and Network Limitations
- Page 13 – Schedule Setup and Adjustment
- Page 14 – Smart Thermostat Features and Advanced Menu Access
- Page 15 – Installer Setup Options: Equipment Configuration
- Page 16 – Installer Setup Options: System Behavior Settings
- Page 17 – Installer Setup Options: Cycle Rate and Protection
- Page 18 – Installer Setup Options: Sensor and Lock Settings
- Page 19 – Installer Setup Options: Display and Interface Adjustments
- Page 20 – System Testing and Equipment Status Viewing
- Page 21 – Alerts and Reminders Management
- Page 22 – Troubleshooting Alerts and System Issues
- Page 23 – Technical Specifications
- Page 24 – Safety Warnings and Regulatory Compliance
Package Includes:
• T6 PRO Z-Wave Thermostat
• UWP™ Mounting System
• Standard Installation Adapter (J-box
adapter)
• Decorative Cover Plate – Small; Size
4-49/64 in = 121mm.
• Screws and anchors
• 3 A A batteries
• Professional Install Guide
• Getting Started Guide
*TH6320Z W2003 depicted.
Actual size 4.09'' x 4.09'' x 1.06''
T6 Pro Z-Wave
Programmable Thermostat
TH6320ZW
Professional Install
Guide
33-00294-07
PM
Menu
Fan
Mode
Fan
Auto
Mode
Heat
Wake Away Home Sleep
Following Schedule
Pro
Series
Compatibility
• Designed for battery operation (3 x AA batteries) or for 24 VAC power operation
(via a “C” or common wire).
• Compatible with most single and multi-stage conventional and heat pump
systems.
• Designed to work with any Z-Wave compliant controller or gateway; however,
a security enabled Z-Wave Plus Controller is recommended to fully utilize all
thermostat features.
• Works with millivolt systems.
• Does not work with electric baseboard heat (120-240V).
User Guide
Visit
honeywellhome.com
for a complete user guide.
Customer assistance
For assistance with this product, please visit
customer.resideo.com
.
Or call Resideo Customer Care toll-free at
1-800-468-1502
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Honeywell
- Model
- T6 PRO Z-WAVE PROGRAMMABLE THERMOSTAT
- Document type
- Manual
- Language(s)
- English
- Pages
- 24
- File size
- 3.2 MB
- Format
Other Manuals for Honeywell T6 PRO Z-WAVE PROGRAMMABLE THERMOSTAT
Summary
Package contents, compatibility details with heating systems and Z-Wave controllers, and links to user guides and assistance resources.
Description of heat pump and conventional HVAC system control capabilities, Z-Wave Plus certification, battery operation, and safety precautions for wiring and battery handling.
Steps for mounting the UWP Mounting System to a wall, positioning, securing with screws, and installing optional decorative cover plates over electrical junction boxes or paint gaps.
