Honeywell Smoke Alarm - Manual

A user manual for the Fire-Lite IPDACT system outlines its installation, connectivity, and programming requirements. The guide covers essential setup steps–including mounting hardware, power wiring, and cable connections–while emphasizing network and central-station compatibility. It also details configuration processes such as DHCP-based IP assignment, phone line management, and device registration via HyperTerminal or serial interfaces. Safety and proper polarity are highlighted throughout to ensure reliable operation.

Page 1 – System Installation Components and Parts List
Page 2 – Power Requirements and Mounting Guidance
Page 3 – IPDACT Mounting Procedure
Page 4 – Cable Interconnection Procedures
Page 5 – Module Installation within Enclosures
Page 6 – IPDACT Module Installation in Power Supply
Page 7 – Module Programming and Defaults
Page 8 – HyperTerminal Connection Configuration
Page 9 – Serial Port and Password Setup
Page 10 – Device Configuration Menu
Page 11 – IP Address Configuration via Quick Install
Page 12 – Device Registration and Reset Procedures
Page 13 – Communication and Network Settings
Page 14 – IP Address Behavior and Monitoring
Page 15 – Viewing Active IP Configuration

Loading the manual

5/19/2008

1 of 15

Application Note:

Fire-Lite IPDACT Setup for Installing Dealers

These pictorial instructions should be used in conjunction with the formal
PID (Product Installation Document) included with the IPBRKT or IPENC as
well as the instructions included with the IPDACT. Please Read all
documentation prior to performing any installation or programming.

Installation Instructions for use with HyperTerminal™ and serial port

Parts List

Part Numbers

Description

IPDACT

Internet Communicator-Contact ID only.
Requires compatible FL panel equipped
with on-board or optional DACT. Requires
300mA aux non-reset able power from
FACP. Includes cable from panel primary
telco port to IPDACT.

IPBRKT

Bracket for mounting IPDACT inside MS-
9200UDLS common enclosure or in
optional HPP-300ULX power supply

IPSPLT

Splitter for dual phone lines to IPDACT
input cable.

ALMSC119

RJ45-DB9F PC serial port programming
cable for IPDACT.

IPENC

Optional cabinet for mounting IPDACT next
to compatible Fire-Lite FACP. Use when
connecting to older non common enclosure
panels such as MS-9200UD or MS-9600.
Includes IPBRKT mounting bracket already
installed.

HP300ULX

Optional UL listed Fire Aux power supply for
mounting IPDACT next to compatible Fire
Panel when additional power is required for
IPDACT.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: Honeywell
Model: Smoke Alarm
Document type: Manual
Language(s): English
Pages: 15
File size: 560 KB
Format: PDF

Other Manuals for Honeywell Smoke Alarm

User Manual

Summary

Page 1 - System Installation Components and Parts List

Installation instructions and a parts list detailing required components such as the IPDACT unit, mounting brackets, splitters, programming cables, cabinets, and power supplies.

Page 2 - Power Requirements and Mounting Guidance

Power and connectivity requirements for the IPDACT device, programming information from the central station checklist, and instructions for mounting the device within a common enclosure.

Page 3 - IPDACT Mounting Procedure

Instructions for mounting the IPDACT device onto the IPBRKT using plastic standoffs and connecting to a 24 VDC power source, including polarity warnings.