Heath Zenith 5326 - Manuals

Heath Zenith 5326 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20

Summary

Page 2 - INSTALLATION; Wall Mount; Timer; Mode Switching Summary; MANUAL MODE

2 598-1269-02 INSTALLATION For easy installation, select an existing light with a wall switch for replacement.For best performance, mount the fixture about 8 ft. (2.4 m) above the ground. NOTE: If fixture is mounted higher than 8 ft. (2.4 m), aiming the sensor down will reduce coverage distance. For...

Page 3 - Mount the Light Control; WARNING: Turn power off at circuit breaker

3 598-1269-02 ❒ Remove the existing light fixture. ❒ Install the mounting strap as shown using two screws that fit your junction box. ❒ The plastic hanger can be used to hold the fixture while wiring. The small end of the plastic hanger can be threaded through the hole in the center of the cover pla...

Page 4 - Motion; Bottom of Sensor; Least Sensitive; TEST AND ADJUSTMENT

4 598-1269-02 70 ft. (21 m) 8 ft. (2.4 m) 240° Maximum Range Maximum Coverage Angle 100 ft. (30.5 m) Boosted Motion Motion NOTE: If fixture is mounted higher than 8 ft. (2.4 m), aiming the sensor down will reduce coverage distance.The detector is less sensitive to motion directly towards it. ❒ Loose...

Heath Zenith Manuals