Epson U01II - UB Print Server- Manuals

Page 2 - TRADEMARKS; EPSON is a registered trademark of SEIKO EPSON CORPORATION.

2/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. - This document applies only to the product(s) identified herein. - No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or...

Page 3 - Contents; Print Server menu

3/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. Contents 1. Features ..............................................................................................................................................................4 2. Supported Operating Systems ............................

Page 4 - Tool

4/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. 1. Features This utility helps you configure various network parameters for Ethernet devices mounted on the TM printers. It has combined the features and devices supported by TMNet WinConfig Ver.1.00 and Ver.2.00. 2. Supported Operating ...

Page 6 - Leave it blank if you are setting a password for the first time.

6/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. 5. About Passwords A password is required to configure the network interface. Follow the steps below to set a password or change the current password. 1 ． Select the network interface to configure on the List view, and then click Send in...

Page 9 - Time Before; Item

9/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. Item Explanation Time Before Declaring Communication Error Specify (between 6 and 120 seconds) the timeout time at which a communication error is triggered. The default value is 6 seconds. Normally you need not change this value. Specify...

Page 10 - This window can be opened by selecting; interfaces that are used.; Refresh; from the; View; menu or restart

10/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. 6. 2. 3 Search Options 6. 2. 3. 1 Search Options-IP This window can be opened by selecting Tool , Search Options , and then IP . TMNet WinConfig can search for TCP/IP-managed network interfaces that are located outside your local networ...

Page 11 - Add; button will add to the list the network address and subnet mask; Delete

11/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. Item Explanation Search Specified Address Select this check box if you want TMNet WinConfig to search for network interfaces located outside your local network (beyond the router). Do not select it unless you intend to configure network...

Page 16 - Set using PING

16/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. 6. 5 TCP/IP menu This menu can be opened by selecting Device , Configuration , and then the TCP/IP tab. The TCP/IP menu helps you configure the TCP/IP settings on the network interface . The following table explains in detail how this m...

Page 17 - Default Gateway; interface

17/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. Item Explanation IP Address Enter an IP address for the network interface. Make sure that the IP address you choose is unique and does not conflict with the address of any other device on the network. Due to the product specifications, ...

Page 19 - Wireless Advanced Settings dialog box; Item Explanation

19/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. 6. 6. 1 Wireless Advanced Settings dialog box This dialog box can be opened by selecting Tools and then Timeout settings . The Wireless Advanced Settings menu helps you set the detail of wireless LAN setting for the network I/F. Items i...

Page 20 - Medium; or; High; if your node switches access points too frequently due to

20/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. Item Explanation RTS/CTS Threshold (0-2347) Specify the threshold (number of bytes) between 0 and 2347. Data with its frame size larger than this value performs the RTS/CTS handshake. If you are not suffering from performance loss cause...

Page 22 - It takes a few minutes to start TMNet WinConfig.

22/25 © SEIKO EPSON CORPORATION 2008-2009. All rights reserved. In the opening window of TMNet WinConfig, the Model Name field is empty and the IP Address says NONE. Step 1 This occurs if you have not changed the IP address of your network interface. You can still configure your network interface by...

Page 25 - OK; Restart TMNet WinConfig.