Page 2 - Important Safety Information; Technical; Key to Symbols
2 English Important Safety Information This manual presents important information intended to ensure safe and effective use of this product. Read this manual carefully and store it in an accessible location. For information on development of a system with this product and setup, see also Technical R...
Page 3 - Caution Labels
3 English ❏ Never disassemble or modify this product. Tampering with this product may result in injury, fire, or electric shock. ! CAUTION: ❏ Do not use this product in locations subject to high humidity or dust levels. Excessive humidity and dust may cause paper jams and other problems, such as fir...
Page 4 - Part Names and Functions; Manual cutter; FEED
4 English Part Names and Functions Manual cutter Use this cutter when you cut the roll paper manually. Roll paper cover Open this cover to install/replace the roll paper. Power switch Use this switch to turn on or off the printer. Cover open lever Press down this lever to open the roll paper cover. ...
Page 5 - Interface; All the ports and connectors are located on the back of the printer.
5 English Interface All the ports and connectors are located on the back of the printer. Drawer kick-out connector Serial port micro SD card slot Micro-USB port Ethernet port USB ports DC-in (5 V ) connector DC-in (24 V ) connector USB port
Page 6 - Setup; Installing the Printer; Install the printer horizontally on a flat surface.
6 English Setup Installing the Printer Install the printer horizontally on a flat surface. As shown in the illustration, install the printer with a maximum tilt of 3°. Installing the printer with a tilt of more than 3° may cause the following problems. • Roll paper near end cannot be detected. • The...
Page 7 - Connecting the AC Adapter; Follow the steps below to connect the AC adapter.
7 English Connecting the AC Adapter Follow the steps below to connect the AC adapter. ! WARNING: Be sure to use the specified AC adapter [AC adapter, RA (Model: M266A)]. Connection to an improper power source may lead to equipment damage, fire, or electric shock. 1. Firmly insert the DC connectors o...
Page 8 - Connecting External Devices; Arranging the Cables
8 English Connecting External Devices If you connect external devices, connect each cable to the port/connector on the back of the printer. ( U “Interface” on page 5 ) ! CAUTION: ❏ When connecting external devices to the USB (including Micro-USB) ports, follow the precautions below. • Confirm the ra...
Page 9 - Attaching the Power Switch Cover
9 English Attaching the Power Switch Cover Attaching the enclosed power switch cover prevents inadvertent changing of the power switch and tampering. You can turn the power switch on and off by inserting a sharp-pointed object in the holes in the power switch cover. To detach the cover, also use a s...
Page 10 - Basic Operations; Press the power switch to turn on/off the printer.; Opening the Roll Paper Cover; Press down the cover open lever to open the roll paper cover.
10 English Basic Operations Turning Power On/Off Press the power switch to turn on/off the printer. Q Note: It takes approximately 30 seconds after the printer is turned on until it is ready for printing. Opening the Roll Paper Cover Press down the cover open lever to open the roll paper cover.
Page 11 - Installing/Replacing the Roll Paper; Follow the steps below to install/replace the roll paper.; Insert the roll paper in the correct direction.
11 English Installing/Replacing the Roll Paper Follow the steps below to install/replace the roll paper. ! CAUTION: Be sure to use the specified roll paper. ( U “Specifications” on page 15 ) 1. Open the roll paper cover. ( U “Opening the Roll Paper Cover” on page 10 ) 2. Remove the used roll paper c...
Page 12 - Tear off the paper with the manual cutter.
12 English 5. Tear off the paper with the manual cutter.
Page 13 - Cleaning; Cleaning the Printer Case
13 English Cleaning Cleaning the Printer Case Be sure to turn off the printer, and wipe the dirt off the printer case with a dry cloth or a damp cloth. ! CAUTION: Never clean the printer with alcohol, benzine, thinner, or other such solvents. Doing so may damage or break the parts made of plastic an...
Page 14 - Troubleshooting; Check whether the AC adapter is correctly connected. (; ERROR LED is on; Check whether the roll paper cover is correctly closed.; PAPER OUT; ERROR LED is flashing; Paper is jammed
14 English Troubleshooting (Power) LED does not light Check whether the AC adapter is correctly connected. ( U “Connecting the AC Adapter” on page 7 ) ERROR LED is on ❏ Check whether the roll paper cover is correctly closed. ❏ If the PAPER OUT LED is on, check whether the roll paper is correctly ins...
Page 15 - Specifications
15 English Specifications *1: 500 mA at maximum for one port. 2 A at maximum for total of the 5 ports (USB and Micro-USB ports).*2: Available when the PHP function is enabled. For information on how to setup PHP environment, see TM-i Series PHP Setup Manual . Be sure to use a micro SD card with the ...
Page 16 - Appendix; Downloading Software and Manuals; For customers in North America, go to the following web site:; Open Source Software License
16 English Appendix Downloading Software and Manuals The latest versions of SDK, utilities, and manuals can be downloaded from one of the following URLs. For customers in North America, go to the following web site: http://www.epsonexpert.com/ For customers in other countries, go to the following we...
Page 17 - Caution; The contents of this manual are subject to change without notice.
17 English Caution No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed w...