Epson RP-300-H- Manuals

RP-300-H User’s Manual 11 2-4. Dip Switch Setting The printer is set up at the factory to be appropriate for almost all users. On the other hand, offers some more settings for users with special requirements.It has DIP switches that allow you to change communication setting, such as handshaking and ...

RP-300-H User’s Manual 12 2-4-2. Parallel Interface Specification DIP Switch Set 1 Functions SW FUNCTIONS ON OFF DEFAULT 2 Hexadecimal HEXDUMP NORMAL OFF 5 Bi-Parallel mode DISABLED ENABLED OFF Print Density (DIP-SW2) Print Density SW-1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF 2-...

RP-300-H User’s Manual 13 2-4-4. USB Interface Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEFAULT 2 Hexadecimal HEXDUMP NORMAL OFF Print Density (DIP-SW2) Print Density SW-1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF ------------------------------------------------ ...

RP-300-H User’s Manual 15 DIP Switch Set 2 Functions Cutter SW FUNCTIONS ON OFF Remarks 3 Cutter FULL CUT PARTIAL CUT Only Epson mode Emulation FUNCTIONS SW-4 SW-5 Epson (TM-88) OFF OFF Paper low detect (*1) SW FUNCTIONS ON OFF 6 Paper Low Detect Do not Detect (*1) The detecting function of [Paper L...

RP-300-H User’s Manual 16 ♣CAUTION: Turn off the printer while removing the DIP switch cover to prevent an electric short, which can damage the printer. 1. Make sure the printer is turned off.2. Remove the screw from the DIP switch cover. Then, take off the DIP switch cover as shown in the illustrat...

RP-300-H User’s Manual 19 4. Self Test The self-test lets you know if your printer is operating properly. It checks the control circuits, printer mechanisms, print quality, ROM version and DIP switch settings. This test is independent of any other equipment or software. Running the self test 1. Make...

RP-300-H User’s Manual 20 5. Hexadecimal Dump This feature allows experienced users to see exactly what data is coming to the printer. This can be useful in finding software problems.When you turn on the hex dump functions, the printer prints all commands and other data in hexadecimal format along wi...

RP-300-H User’s Manual 21 6. Specifications Appendix A : Specifications 6-1. General Specifications (1) Printing Method Direct line thermal printing. (2) Print speed 200mm/sec. (3) Dot density 180DPI(Hor/Ver) 180 / 180 (0.142mm / 0.142mm dot) (4) Printing Width 180DPI Max 72mm (512dots) (5) Number of p...

RP-300-H User’s Manual 26 No. Command Function REMARKS 39 ESC p General pulse 40 ESC t Select character code table 41 ESC { Turn upside-down printing mode on/off 42 FS p Print NV bit image 43 FS q Define NV bit image 44 GS ! Select character size 45 GS $ Set absolute vertical print position in page m...

RP-300-H User’s Manual 28 ♣ ⊼ᛣџ䷙ : ೼⿏䰸 DIP switch 㪟ᄤࠡ䷜ܜᇛ printer 䳏⑤䮰ᥝҹܡⱐ⫳ⷁ䏃ᇢ㟈 printer ➦↔ . 1. ܜ⺎䁡 printer 䳏⑤⺎ᆺ䮰䭝 2. ⿏䰸 DIP switch 㪟ᄤϞП㶎㍆ݡᇛ㪟ᄤᠧ䭟བ೪⼎ 3. Փ⫼ᇪൟᎹ݋䀁ᅮ switches, 䃌བ䩋ᄤ៪ᇣ㶎㍆䍋ᄤ 4. Փ⫼ॳܜ⿏䰸П㶎㍆ᇛ DIP switch 㪟ᄤ䥪ԣ བℸᮄ䀁ᅮᇛᮐ䳏⑤䞡ᮄ䍋ࢩᕠ⫳ᬜ G G

RP-300-H User’s Manual 29 ♣ ⊼ᛣџ䷙ : ⭊߫ॄ㋭ߛࡆ䏇㛿៪वԣᰖৃ㛑ᰃ㹿Ϟッ㪟ᄤवԣ೼ℸ。⢔⊕ϟ䂟䞡㻛ᇛ䳏⑤䭟䮰ᭌ⃵བᵰᬙ䱰ҡ⛵⊩ᥦ䰸䂟ձᕾҹϟℹ倳ᥦ䰸ᬙ䱰 1. ⺎䁡 printer 䳏⑤⺎ᆺ䮰䭝 2. ⿏䰸ߛߔ㪟བ೪⼎ 䔝ࢩ㶎ṓⳈࠄ㋭㛿䲶ߛߔ Caution label: 䄺䁲䗭ᰃ⬆串ⱘ䊛㿞⫶ક೼ሙԣⱘ⪄๗Փ⫼ᰖৃ㛑᳗䗴៤ᇘ丏ᑆ᫒೼䗭。ᚙ⊕ϟՓ⫼㗙᳗㹿㽕∖᥵পᶤѯ䘽⭊ⱘᇡㄪ

RP-300-H User’s Manual 5 2-2. Connecting the Cables You can connect up the cables required for printing to the printer. They all connect to the connector panel on the back of the printer, which is shown below : Before connecting any of the cables, make sure that both the printer and the computer are...

RP-300-H User’s Manual 11 2-4. Dip Switch Setting The printer is set up at the factory to be appropriate for almost all users. On the other hand, offers some more settings for users with special requirements. It has DIP switches that allow you to change communication setting, such as handshaking and...

RP-300-H User’s Manual 12 2-4-2. Parallel Interface Specification DIP Switch Set 1 Functions SW FUNCTIONS ON OFF DEFAULT 2 Hexadecimal HEXDUMP NORMAL OFF 5 Bi-Parallel mode DISABLED ENABLED OFF Print Density (DIP-SW2) Print Density SW-1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF 2-...

RP-300-H User’s Manual 13 2-4-4. USB Interface Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEFAULT 2 Hexadecimal HEXDUMP NORMAL OFF Print Density (DIP-SW2) Print Density SW-1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF ------------------------------------------------ ...

RP-300-H User’s Manual 19 4. Self Test The self-test lets you know if your printer is operating properly. It checks the control circuits, printer mechanisms, print quality, ROM version and DIP switch settings. This test is independent of any other equipment or software. Running the self test 1. Make...

RP-300-H User’s Manual 21 6. Specifications Appendix A : Specifications 6-1. General Specifications (1) Printing Method Direct line thermal printing. (2) Print speed 200mm/sec. (3) Dot density 180DPI(Hor/Ver) 180 / 180 (0.142mm / 0.142mm dot) (4) Printing Width 180DPI Max 72mm (512dots) (5) Number of p...

RP-300-H User’s Manual 28 ♣ 注意事項 : 在移除 DIP switch 蓋子前,須先將 printer 電源關掉,以免發生短路導致 printer 燒毀 . 1. 先確認 printer 電源確實關閉 2. 移除 DIP switch 蓋子上之螺絲,再將蓋子打開,如圖示 3. 使用尖型工具,設定 switches, 諸如鑷子或小螺絲起子. 4. 使用原先移除之螺絲,將 DIP switch 蓋子鎖住. 如此新設定將於電源重新起動後生效.

RP-300-H User’s Manual 29 ♣ 注意事項 : 當列印紙切割跳脫或卡住時,可能是被上端蓋子卡住. 在此種狀況下, 請重複將電源開關數次.如果故障仍無法排除,請依循以下步驟排除故障 1. 確認 printer 電源確實關閉 2. 移除切刀蓋如圖示 3.轉動螺桿直到紙脫離切刀 Caution label: 警語這是甲類的資訊產品,在居住的環境使用時,可能會造成射頻干擾,在這種情況下,使用者會被要求採取某些適當的對策