Epson PS-100- Manuals

Note: Please note that even if not in use, the PS-100 should be charged at least once within a 6 month period. Failing to do so might affect the performance of the rechargeable battery. Notes on using the cradle Warning Do not use the charging cradle, AC adapter, or USB cable if they are damaged, fa...

Set up and basic operation Follow these instructions to use your device: “ Things You Can Do with the Product ” on page 10 “ What’s in the box ” on page 10 “ Getting Started ” on page 11 “ Initial Configuration ” on page 17 Set up and basic operation • 9

What’s in the box Contact your reseller if there are any missing or damaged components. PS-100 Charging Cradle Quick Start Guide Options You can purchase the following optional accessories. AC Adapter （ SFAC04 ） Set up and basic operation • 10

Getting started Recording your data ! Important To record your data it is necessary to register your device with the PULSENSE View smart device application. Data Calculated Heart rate Reads and records your heart rate from the changes in light reflected through the blood vessels in your wrist. Calor...

Initial configuration Smart device user 1 Search your smart device's app store for Epson PULSENSE View (free), and then install it. Make sure "Internet communication" and "Bluetooth ® " are enabled in your smart device. Check the operating instructions for your smart device for the i...

Pairing issues When using the product for the first time, check the following: 1. Attach the PS-100 to the cradle to wake the PS-100 from battery protection mode. 2. Enable Bluetooth ® communication on your smart device. 3. Check smart device compatibility: epson.com/PSdevices 4. Ensure your smart d...

Heart rate measurement Heart rate detection 1 Heart rate detection starts when the product is moved and the LEDs flash in sequence as shown belo w. Note: Heart rate detection will stop if the product is not worn and has not been moved for three minutes. Heart rate detection will start again when the...

50 ～ 59% ↑ ↑ ↑ - 60 ～ 69% ↑ ↑ ↑ - 70 ～ 79% ↑ ↑ ↑ - 80 ～ 89% ↑ ↑ ↑ - Above 90% Blinking (Faster) - Note: You can check your real time heart rate (updated every four seconds) in the PULSENSE View app. Swipe the tab located in the middle at the top of the screen to the bottom in order to display the re...

How to stop and resume heart rate measurement Heart rate detection stops if the product is not worn and has not been moved for three minutes. Heart rate detection starts again when the product has been moved. This LED pattern is shown when the PS-100 has been removed from your wrist: Note: Place the...

Low battery notification If the battery level is low, the orange LED will flash every 4 seconds. Once the remaining battery level is down to 1 hour, the orange LED flashes once a second for a duration of 30 seconds and the PS-100 stops measuring heart rate until the product has been charged. Using y...

Airplane mode Wireless communication must be turned OFF during a flight. Set the product to Airplane Mode before take-off. When transporting the product it is recommend that you use this mode. 1 Remove the product from your wrist and repeatedly tap the face of the product as shown below. ! Important...

Turn off airplane mode 1 Repeatedly tap the face of the product. The LEDs will light up and display the pattern below to confirm it is still in Airplane Mode. 2 Keep tapping until the LEDs turn off . The product will resume heart rate measurement and wireless communication. Using your PS-100 • 27

Notification settings Depending on your settings, the product can alert you by vibration and LEDs when you receive an E-mail, call, or calendar notifications on your smart device. To alert you, the LED pattern will light up six times, as shown below, and vibrate. Vibration must be enabled in the PUL...

Maintenance “ Looking after your device ” on page 31 “ Replacing the Battery ” on page 31 “ Updating the Firmware ” on page 31 Maintenance • 30

Looking after your device Clean the PS-100 regularly. Wipe your product with a damp cloth, remove the moisture with a towel, then let it air dry. ! Important: Avoid water, sweat or dirt build up between your skin and the product as it could lead to skin irritations. About the wristband The wristband...

Troubleshooting This section explains how to solve problems that occur during use. “ Caution” on page 33 “ Problem Solving ” on page 34 “ System Reset ” on page 35 “ Contacting us ” on page Error! Bookmark not defined. Troubleshooting • 32

Problem solving Check each item. Problem Solution LED is not ON or Flashing. Before charging, the PS-100 is in battery protection mode. Put the product in the cradle and connect it to a USB port or AC adapter to charge the product and wake the product from battery protection mode. “Getting Started” ...

System Reset If device operations become unstable, perform a system reset by connecting the product to the cradle. Charging resets the system, and returns the product to normal operation. If this suggestion does not solve your problem, check “ Problem Solving ” on page 34. Troubleshooting • 35

Where to get help Internet support Visit epson.com/support/ps100 (U.S.) or epson.ca/support/ps100 (Canada) for solutions to common problems. You can get tips, usage information, and FAQs, download utilities, view the User’s Guide, or e-mail Epson. Telephone support services Call (562) 276-4394 (U.S....

Appendix “ Product Specification ” on page 32 Appendix • 37

Product specification Device specifications Contents Specification Model PS-100 Size (LxWxH) 1.77 in ｘ 0.87 in ｘ 0.49 in (excluding sensor unit ） 45 mm ｘ 22 mm ｘ 12.5 mm (excluding sensor unit ） Weight S/M: 1.05 oz/30 g M/L: 1.09 oz/31 g Wrist Size S/M: 5.31 in-6.30 in/135 mm-160 mm M/L: 5.91 in-8.2...