Epson Epson Stylus NX330- Manuals

Parent topic: Setting Up the Control Panel Adjusting Control Panel Position You can adjust the position of the control panel to make it easier to use. • To raise the control panel, lift it up from the bottom. • To lower the control panel, squeeze the release bar and gently push the panel down. Cauti...

3. Press the OK button. 4. Press the arrow buttons to select a language and press the OK button. 5. Press the home button to exit. Parent topic: Setting Up the Control Panel Selecting Wireless Network Settings From the Control Panel You can select or change wireless network settings using your produ...

• To switch between ABC (uppercase), abc (lowercase), or 123 (numbers and symbols), press the home button. • To delete characters, press the left arrow. • When you finish entering characters, press the OK button. 8. If you want to print a network setup report, press the start button. (Otherwise, pre...

Product Parts - Inside 1 Scanner unit 2 Ink cartridge holder in home position Parent topic: Product Parts Locations 19

Loading Paper Before you print, load paper for the type of printing you will do. Loading Paper for DocumentsLoading Paper for PhotosLoading EnvelopesPaper Loading CapacityAvailable Epson PapersBorderless Paper Type CompatibilityPaper or Media Type Settings Loading Paper for Documents You can print d...

• Load paper short edge first, no matter which way your document faces. • Load letterhead or pre-printed paper top edge first. • Do not load paper above the arrow mark inside the edge guide. • Check the paper package for any additional loading instructions. Parent topic: Loading Paper Related refere...

• Load paper short edge first, no matter which way your photo faces. • Do not load paper above the arrow mark inside the edge guide. • Check the paper package for any additional loading instructions. Parent topic: Loading Paper Related references Paper Loading Capacity Loading Envelopes You can prin...

Paper Loading Capacity Paper type Load up to this many sheets Plain paper - Letter (8.5 × 11 inches [216 × 279 Approximately 100 sheets* mm])** 80 sheets Epson Bright White Paper Epson Presentation Paper Matte Epson Photo Paper Glossy 20 sheets Epson Premium Photo Paper Glossy Epson Ultra Premium Ph...

Paper Type Size Part number Sheet count Epson Premium Presentation 8 × 10 inches (203 × 254 mm) S041467 50 Paper Matte Letter (8.5 × 11 inches S041257 50 [216 × 279 mm]) S042180 100 Epson Premium Presentation Letter (8.5 × 11 inches S041568 50 Paper Matte Double-sided [216 × 279 mm]) Epson Ultra Pre...

Paper or Media Type Settings For this paper Select this paper Type or Media Type setting Plain paper Plain Paper/Bright White Paper Epson Bright White Paper Epson Presentation Paper Matte Epson Iron-on Cool Peel Transfer paper Epson Photo Quality Self-adhesive Sheets Epson Ultra Premium Photo Paper ...

Placing Originals on the Product Follow the instructions here to place your original documents or photos on the product. Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid damaging it. Placing Originals on the Scanner Glass Placing Originals on the S...

Note: You can place multiple originals on the scanner glass. Just make sure they are at least 0.8 inch (20 mm) away from each other. 3. Close the document cover gently to keep your original in place. Parent topic: Placing Originals on the Product Related topics CopyingScanning 35

Copying See the information here to copy documents or photos using your product. Note: Copies may not be exactly the same size as your originals. Copying Documents or Photos Copying Documents or Photos You can copy color or black-and-white documents or photos onto various sizes and types of paper,in...

6. To view the print settings for the copies, press the OK button. You see the current settings: 7. To change the print settings, press the arrow button and select the necessary settings. 8. When you are ready to copy, press the start button. Note: To cancel copying, press the stop button. Selecting...

2. Do the following as necessary to select settings: • To change the selected option for the current print setting, press the arrow button and select the option you want. • To select a different print setting, press the arrow button, select the setting you want, and press the arrow button to select ...

Printing From a Computer Before printing documents or photos from your computer, make sure you have set up your product andinstalled its software as described on the Start Here sheet. Note: It is a good idea to check for updates to your product software on Epson's support website. Printing With Wind...

includes a face with an intentional color cast, such as a statue, you may want to turn off Fix Photo to retain the special color effects. Fix Red-Eye Reduces or removes red-eye in photos. Reverse Order Prints multi-page print jobs last page first. Print Preview Displays a preview of your printout be...

2. Select the Paper & Quality Options settings for your printout: • Select the type of paper you loaded. Note: Check the paper type settings list for details. • Select the print quality setting you want to use. Note: Check the print quality setting list for details. • Select the size of the pape...

Fix Photo Improves the color, contrast, and sharpness of flawed photos. Note: Fix Photo uses a sophisticated face recognition technology to optimize photos that include faces. For this to work, both eyes and the nose must be visible in the subject's face. If your photoincludes a face with an intenti...

Note: If you select the Min option for the Expansion setting, you may see white borders on your printed photo. • To print the borderless image at its actual size without scaling, select Retain Size as the Enlargement Method setting. • To add a watermark to your printout, select Watermark settings. •...

2. Place your cursor over a Printing Presets option to view its list of settings. 3. Use any of the available options on the screen to control your printing presets. 4. To choose an option for printing, select it. 5. Click OK . Parent topic: Printing With Windows Printing Your Document or Photo - Wi...

2. Click OK or Print to start printing. Checking Print Status - Windows Parent topic: Printing With Windows Checking Print Status - Windows During printing, you see this window showing the progress of your print job. It allows you to controlprinting and check ink cartridge status. 52

• To cancel printing, click Stop . • To see print jobs lined up for printing, click Print Queue . • To check ink status, click Check Ink Levels . Parent topic: Printing Your Document or Photo - Windows Selecting Default Print Settings - Windows When you change your print settings in a program, the c...

3. Select the print settings you want to use as defaults in all your Windows programs. 4. Click OK . These settings are now the defaults selected for printing. You can still change them as needed forprinting in any program session. Changing the Language of the Printer Software Screens Parent topic: ...

Changing Automatic Update Options Your printer software for Windows automatically checks for updates to the product driver and firmware.You can change how often the software checks for updates or disable this feature. 1. Right-click the product icon in the Windows taskbar. 2. Select Auto Update Sett...

You see the expanded printer settings window for your product: Note: The print window may look different, depending on the version of Mac OS X and the application you are using. 5. Select the Copies and Pages settings as necessary. Note: If you do not see these settings in the print window, check fo...

6. Select the page setup options: Paper Size and Orientation . Note: If you do not see these settings in the print window, check for them in your application before printing. They may be accessible by selecting Page Setup from the File menu. 7. Select any application-specific settings that appear on...

9. Select the type of paper you loaded as the Media Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 10. Select the Print Quality setting you want to use. 11. Select any of the available print options. Print Quality Setting...

Note: Fix Photo uses a sophisticated face recognition technology to optimize photos that include faces. For this to work, both eyes and the nose must be visible in the subject's face. If your photoincludes a face with an intentional color cast, such as a statue, you may want to turn off Fix Photo to...

Parent topic: Selecting Printing Preferences - Mac OS X 10.5/10.6/10.7 Printing With Mac OS X 10.4 You can print with your product using any Mac OS X printing program, as described in these sections. Selecting Page Setup Settings - Mac OS X 10.4Selecting Basic Print Settings - Mac OS X 10.4Selecting...

Related tasks Selecting Basic Print Settings - Mac OS X 10.4 Selecting Basic Print Settings - Mac OS X 10.4 Select the basic settings for the document or photo you want to print. 1. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print opti...

4. Select Print Settings from the pop-up menu. 5. Select the type of paper you loaded as the Media Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 6. Select the Print Quality setting you want to use. 7. Select any of the a...

Parent topic: Selecting Basic Print Settings - Mac OS X 10.4 Selecting Print Layout Options - Mac OS X 10.4 You can select layout options for multi-page documents by selecting Layout from the pop-up menu on the print window. • To print multiple pages on one sheet of paper, select the number of pages...

1. Select Color Options from the pop-up menu in the print window. 2. Select one of the available options. Color Options - Mac OS X 10.4 Parent topic: Printing With Mac OS X 10.4 Color Options - Mac OS X 10.4 You can select from these settings on the Color Options menu. Manual Settings Lets you selec...

2. Select the following options as necessary: • To cancel printing, click the print job and click Delete . • To pause printing, click the print job and click Hold . To resume printing, click the print job marked "Hold" and click Resume . • To check ink status, click Supply Levels . Parent to...

Wireless Printing From a Mobile Device You can print photos, documents, web pages, and more from a compatible wireless mobile device, suchas a smartphone, iPhone, tablet, iPad, or iPod. 1. Set up your product for wireless printing as described on the Start Here sheet. 2. Visit www.epson.com/connect ...

Scanning You can scan original documents or photos and save them as digital files on your computer. Starting a ScanSelecting Epson Scan SettingsScanning With Mac OS X 10.6/10.7Scanning Special Projects Starting a Scan After placing your original documents or photos in your product for scanning, star...

3. Press the arrow buttons to select a scan option and press the OK button. • To PC saves your scan file directly to your computer or as an image capture in Mac OS X 10.6/10.7. • To PC (PDF) saves your scan as a PDF file to your computer or as an image capture in Mac OS X 10.6/10.7. • To PC (Email) ...

Changing Default Scan Button Settings Parent topic: Starting a Scan Changing Default Scan Button Settings You can view or change the default scan settings your product uses when you scan using the productbuttons. You do this using the Event Manager program. 1. Do one of the following to open Event M...

Parent topic: Starting a Scan Related tasks Scanning With Mac OS X 10.6/10.7 Related topics Selecting Epson Scan Settings 82

Starting a Scan From a Scanning Program You can start Epson Scan from a scanning program to select scan settings, scan, and open the scannedimage in the program. Note: You cannot use Epson Scan with Mac OS X 10.6/10.7. 1. Open your scanning program and select its scanning option. (See your scanning ...

Selecting Epson Scan Settings After starting Epson Scan, you can select settings in various modes to customize your scan. Scan ModesSelecting the Scan ModeScanning in Full Auto ModeScanning in Home ModeScanning in Office ModeScanning in Professional ModeImage Preview GuidelinesScan Resolution Guidel...

Parent topic: Selecting Epson Scan Settings Related tasks Scanning in Full Auto ModeScanning in Home ModeScanning in Office ModeScanning in Professional Mode Scanning in Full Auto Mode When you scan in Full Auto Mode, Epson Scan automatically saves your scanned file in JPEG format inyour operating s...

2. To select image adjustment options or change your scanned file settings, click Customize , select the settings, and click OK . • To choose any of the available image adjustment options, select the checkbox for the option. • To change the scanned file settings, click File Save Settings . 3. Click ...

Related tasks Selecting Scan File Settings Available Image Adjustments - Full Auto Mode You can select these image adjustment options in Epson Scan Full Auto Mode. Dust Removal Removes dust marks from your originals automatically. Color Restoration Restores the colors in faded photos automatically. ...

2. Select the Document Type setting that matches your original, such as Photograph or Text/Line Art . 3. Select the Image Type setting that matches your original. 90

Selecting a Scan Area - Home Mode You can select a specific area in your preview image to include in your scanned image. You can selectthe entire image area or a portion of it. You can even select multiple scan areas to create multiplescanned images of different areas (Normal Preview mode only). You...

• Normal preview : Click the Auto Locate icon to create a marquee (dotted line) on the preview image. 93

2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marq...

4. To create a scanned image size that is not available in the Target Size list, click the Customize option. 5. Name the custom size, enter the size, click Save , and click OK . Then create a scan area on the preview image. The marquee is automatically proportioned for your custom scan size. Parent ...

Epson Scan previews your original and displays the result in a separate Preview window. 7. If desired, select the area in your preview image that you want to scan (scanned image area). 8. Select any of the image adjustment settings you want to use. Before making adjustments, click theimage or scanne...

• To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.) • To create additional marquees (up to 50), click the Copy Marquee ...

Text Enhancement Sharpens the appearance of letters in text documents. Auto Area Segmentation Makes grayscale images clearer and text recognition more accurate by separating the text from thegraphics. Color Enhance Enhances the red, green, or blue shades in the scanned image. Brightness Adjusts the ...

• Normal preview : To create additional marquees (up to 50), click the Copy Marquee icon to copy the existing marquee and paste it on the preview image. • To delete a marquee, click the marquee, then click the Delete Marquee icon. 3. Click inside the scan area and make any necessary settings in the ...

Selecting a Scan Size - Professional Mode You can reduce or enlarge the size of your image as you scan. You can also select a specific scan size,such as a common photo size like 4 × 6 inches (102 × 152 mm). This places a scan area of that size onthe preview image so you can use it to help crop the i...

• Unlock icon: Unlocks the width/height proportions of the scanned image size so you can adjust it without constraint. Parent topic: Scanning in Professional Mode Image Preview Guidelines You can preview your scanned image so you can adjust the scan settings using the preview as a guide.There are tw...

Parent topic: Selecting Epson Scan Settings Selecting Scan File Settings You can select the location, name, and format of your scan file on the File Save Settings window. Youcan also select various optional settings that control how Epson Scan behaves when you scan and savefiles. The File Save Setti...

3. Click Show Details . 4. Select your scan settings as necessary. 5. Select the folder in which you want to save your scanned file in the Scan To pop-up menu. 6. Click Scan . Your scanned file is saved in the folder you selected. Parent topic: Scanning Scanning Special Projects Your product's scann...

Scanning to a PDF File Using Epson Scan, you can scan a multi-page document and save it in one PDF (Portable DocumentFormat) file on your computer. 1. Place your original on your product for scanning. 2. Start Epson Scan. 3. Select the scan mode you want to use. 4. Select the scan settings for your ...

7. Select PDF as the Type setting. 8. Select any other settings you want to use on the File Save Settings window. 9. Click OK . Epson Scan scans your document and you see this window: 120

Related topics Starting a ScanSelecting Epson Scan Settings Restoring Photo Colors as You Scan You can restore the colors in faded photos as you scan them using Epson Scan's Color Restorationsetting. You can select this setting in any of the available scan modes. 1. Place your original on your produ...

Using Memory Cards With Your Product Follow the instructions here to work with a memory card inserted into your product. Inserting a Memory CardPrinting From a Memory CardTransferring Photos on a Memory Card Inserting a Memory Card Insert only one memory card at a time in one of your product's memor...

Caution: Do not remove a memory card or turn off your product while the memory card access light is flashing or you may lose data from the memory card. Memory Card TypesMemory Card File SpecificationsRemoving a Memory Card Parent topic: Using Memory Cards With Your Product Related references Memory ...

• miniSDHC* • miniSD* • microSDHC* • microSD* Parent topic: Inserting a Memory Card Memory Card File Specifications You can insert memory cards in your product containing files that meet these specifications. File format JPEG with the Exif version 2.3 standard Image size 80 × 80 pixels to 9200 × 920...

1. Make sure the memory card access light is not flashing. 1 Memory card access light 2. If your product is connected to your computer using a USB cable, do one of the following: • Windows : Open the My Computer , Computer , or Windows Explorer utility. Then right-click the name of your memory card ...

Print Setting Options - Photo Mode Parent topic: Printing From a Memory Card Viewing and Printing Individual Photos You can select individual photos for printing as you view them on the LCD screen. 1. Press the home button if necessary. 2. Press the arrow buttons to select Print Photos and press the...

7. To change the print settings, press the arrow button and select the necessary settings. 8. When you are ready to print, press the start button. Note: To cancel printing, press the stop button. Parent topic: Viewing and Printing Photos Related tasks Selecting Print Settings for Photos Displayed on...

Parent topic: Viewing and Printing Photos Transferring Photos on a Memory Card You can transfer photos to and from a memory card inserted into your product's memory card slots. Transferring Photos From a Memory Card to Your Computer Parent topic: Using Memory Cards With Your Product Transferring Pho...

Replacing Ink Cartridges When an ink cartridge is expended, you need to replace it. You may also need to replace a cartridge that is more than six months old, if your printouts do not looktheir best, even after cleaning and aligning the print head. Note: Please dispose of your used Epson branded ink...

2. Press the OK button. You see this screen: Note: The display is different depending on which ink cartridges are low or expended, if any. Displayed ink levels are approximate. 3. Do one of the following: • If you are finished, select Back and press the OK button. 132

• If you want to replace an ink cartridge now, select Replace now and press the OK button. When you finish replacing cartridges, press the OK button again. Note: Depending on the color of the expended cartridge and how you are printing, you may be able to continue printing temporarily. Parent topic:...

2. Replace or reinstall any ink cartridge indicated on the screen. Note: Depending on the color of the expended cartridge and how you are printing, you may be able to continue printing temporarily. Note: If any of the cartridges installed in the product is broken, incompatible with the product model...

4. Deselect the See Low Ink Reminder alerts checkbox at the bottom of the screen. 5. To disable promotional offers, deselect the Display Epson Offers checkbox. Parent topic: Check Cartridge Status Related tasks Removing and Installing Ink Cartridges 135

Related topics Printing With Black Ink and Expended Color Cartridges Checking Cartridge Status With Mac OS X You can check the status of your ink cartridges using a utility on your Mac. 1. Do one of the following: • Mac OS X 10.6/10.7 : In the Apple menu or the Dock, select System Preferences . Sele...

3. Do the following as necessary: • You can update the ink cartridge status by clicking Update . • Replace or reinstall any ink cartridge indicated on the screen. Note: Depending on the color of the expended cartridge and how you are printing, you may be able to continue printing temporarily. Note: ...

Related tasks Removing and Installing Ink Cartridges Related topics Printing With Black Ink and Expended Color Cartridges Purchase Epson Ink Cartridges You can purchase genuine Epson ink and paper at Epson Supplies Central at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can ...

Removing and Installing Ink Cartridges Make sure you have your replacement cartridges handy before you begin. You must install newcartridges immediately after removing the old ones. Caution: Leave your old cartridges in the printer until you are ready to replace them to prevent the print head nozzle...

7. Insert the new cartridge into the holder and push it down until it clicks into place. 8. Press the OK button. 9. Lower the scanner unit. The print head moves to its home position and the printer starts charging the ink. This takes about 2minutes. When you see the Ink Cartridge Replacement screen,...

If you see an error screen telling you an ink cartridge is installed incorrectly, lift up the scanner unitand press the ink cartridge down until it clicks into place. When you're finished, press the OK button. If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge...

2. Click the Ink Cartridge Replacement icon and follow the on-screen instructions to replace your ink cartridges as necessary. Parent topic: Replacing Ink Cartridges Related concepts Purchase Epson Ink Cartridges Printing With Black Ink and Expended Color Cartridges When a color ink cartridge is exp...

Printing With Expended Color Cartridges - WindowsPrinting With Expended Color Cartridges - Mac OS X 10.5/10.6/10.7 Parent topic: Replacing Ink Cartridges Printing With Expended Color Cartridges - Windows If you see a message during printing telling you that you can temporarily print in black ink wit...

1. Click the printer icon in the Dock. 2. If you see a message telling you that you can temporarily print with only black ink, click the Delete icon to cancel your print job. Note: If the message screen appears on another computer on a network, you may need to cancel the print job using the product ...

Adjusting Print Quality If your print quality declines, you may need to run a utility to clean or align the print head. If running these utilities does not solve the problem, you may need to replace the ink cartridges. Print Head MaintenancePrint Head AlignmentCleaning the Paper Path Related topics ...

4. Click Print . 5. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 153

6. If there are no gaps, click Finish . If there are gaps or the pattern is faint, clean the print head. Parent topic: Print Head Nozzle Check Related concepts Print Head Cleaning Print Head Cleaning If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean ...

Print head needs cleaning • If there are no gaps, click Finish . • If there are gaps or the pattern is faint, click Clean to clean the print head again. If you don’t see any improvement after cleaning the print head up to 4 times, turn off the product and waitat least 6 hours. Then try cleaning the ...

Aligning the Print Head Using the Product Control Panel You can align the print head using the control panel on your product. 1. Load a few sheets of plain paper in the product. 2. Press the arrow buttons to select Setup and press the OK button. 3. Press the arrow buttons to select Maintenance and p...

5. Press the start button to print an alignment sheet. Note: Do not cancel printing while you are printing a head alignment pattern. You see this screen: 6. Press the OK button. You see this screen: 7. Check the printed pattern and press the arrow buttons to choose the number representing the bestpr...

Parent topic: Print Head Alignment Aligning the Print Head Using a Computer Utility You can align the print head using a utility on your Windows computer or Mac. 1. Load a few sheets of plain paper in the product. 2. Do one of the following: • Windows: Right-click the product icon in the Windows tas...

5. Check the printed pattern and follow the instructions on the screen to choose the numberrepresenting the best printed pattern for each set. • After choosing each pattern number, click Next . • If no patterns are aligned in one or more of the sets, choose the closest one in each set and click Real...

Cleaning the Paper Path If you see ink on the back of a printout, you can clean the paper path to remove any excess ink. 1. Load a few sheets of plain paper in the product. 2. Use the product control panel to make a copy, but without placing a document on the scanner glass. 3. Check the back of the ...

Cleaning and Transporting Your Product See these sections if you need to clean or transport your product. Cleaning Your ProductTransporting Your Product Cleaning Your Product To keep your product working at its best, you should clean it several times a year. Close the output tray and paper support w...

Solving Problems Check these sections for solutions to problems you may have using your product. Checking for Software UpdatesProduct Status MessagesRunning a Product CheckResetting Control Panel DefaultsSolving Setup ProblemsSolving Network ProblemsSolving Copying ProblemsSolving Paper ProblemsSolv...

Product Status Messages You can often diagnose problems with your product by checking the messages on its LCD screen. LCD code Condition/solution (E-01) A fatal error has occurred. Turn the product off and then back on again. If the errorcontinues, check for a paper jam. If there is no paper jam, co...

Related concepts Check Cartridge Status Related references Paper Jam ProblemsWhere to Get Help Related topics Replacing Ink CartridgesPrinting With Black Ink and Expended Color CartridgesLoading Paper Running a Product Check Running a product check helps you determine if your product is operating pr...

After the nozzle pattern prints, you see this screen: 7. Do the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is operating properly. Any operation problem you may have could be caused by your computer, cable, soft...

1. Press the arrow buttons to select Setup and press the OK button. You see this screen: 2. Press the arrow buttons to select Restore Default Settings and press the OK button. You see this screen: 3. Press the arrow buttons to select one of these options and press the OK button: • Wi-Fi Settings : R...

• All Settings : Resets all control panel settings. You see a confirmation screen. 4. Press the OK button to reset the selected settings. (Press the stop button if you want to cancel the operation.) Parent topic: Solving Problems Solving Setup Problems Check these sections if you have problems while...

• In Windows, make sure your product is selected as the default printer and the correct port is shown in the printer properties. • If you see any error message or your software does not install correctly in Windows, you may not have software installation privileges. Contact your System Administrator...

Product Cannot Connect to a Wireless Router or Access Point If your product has trouble finding or connecting to a wireless router or access point, try these solutions: • Make sure to place your product within contact range of your router or access point. Note: Avoid placing your product near a micr...

Related tasks Selecting Wireless Network Settings From the Control Panel Product Does Not Appear in Mac OS X Printer Window If your product does not appear in the Mac OS X printer window, try these solutions: • Turn your product off, wait 30 seconds, then turn it back on again. • If you are connecti...

Cannot Scan Over a Network If you cannot start Epson Scan for scanning over a network, try these solutions: • If you are scanning a large original at a high resolution, a network communication error may occur. Try scanning again at a lower resolution. • If network communication was interrupted while...

3. Press the arrow buttons to select Print Status Sheet and press the OK button. You see this screen: 4. Press the start button to print the network status sheet. (Press the stop button if you want to cancel the operation.) Examine the settings shown on the network status sheet to diagnose any probl...

Solving Copying Problems Check these solutions if you have problems copying with your product. Product Makes Noise, But Nothing CopiesProduct Makes Noise When It Sits for a While Parent topic: Solving Problems Product Makes Noise, But Nothing Copies If your product makes a noise, but nothing copies,...

Paper Feeding Problems If you have problems feeding paper, try these solutions: • If paper does not feed for printing, remove it. Then reload it in the sheet feeder against the right side and beneath the tab. Slide the edge guide against the edge of the paper, making sure that the paperstack is not ...

6. Lower the scanner unit and press the power button to turn the product back on. 7. Carefully follow all paper loading instructions when you load new paper. Parent topic: Solving Paper Problems Related references Paper or Media Type Settings Related tasks Cancelling Printing Using a Product Button ...

Parent topic: Solving Paper Problems Related references Paper Jam ProblemsPaper or Media Type Settings Related tasks Cancelling Printing Using a Product Button Related topics Loading Paper Solving Problems Printing From a Computer Check these sections if you have problems while printing from your co...

• Windows Vista : Click and select Control Panel . Click Printer under Hardware and Sound , right-click your product name, select Open , right click the stalled print job, click Cancel , and click Yes . • Windows XP : Click Start and select Printers and Faxes . (Or open the Control Panel , select Pr...

Note: If the print head is not in the correct position, press the stop button to move it to the ink cartridge replacement position. 2. Remove and reinsert the ink cartridge you replaced, making sure to push it all the way into its slot. 3. Complete the ink cartridge installation steps. Parent topic:...

Related references Windows System RequirementsMac System RequirementsPaper or Media Type Settings Related tasks Selecting Basic Print Settings - WindowsSelecting Basic Print Settings - Mac OS X 10.5/10.6/10.7Selecting Basic Print Settings - Mac OS X 10.4 Solving Page Layout and Content Problems Chec...

Selecting Basic Print Settings - Mac OS X 10.4 Too Many Copies Print Make sure that the Copies setting in your printing program or printer software is not set for multiple copies. Parent topic: Solving Page Layout and Content Problems Related tasks Selecting Print Layout Options - WindowsSelecting B...

Incorrect Margins on Printout If your printed page has incorrect margins, try these solutions: • Make sure you selected the correct paper size settings in your printing program and printer software. • Make sure you selected the correct margins for your paper size in your printing program. • Make sur...

Selecting Page Setup Settings - Mac OS X 10.4Selecting Print Layout Options - WindowsSelecting Basic Print Settings - Mac OS X 10.4 Incorrect Characters Print If incorrect characters appear in your prints, try these solutions before reprinting: • Make sure any interface cables are securely connected...

Selecting Print Layout Options - WindowsSelecting Print Layout Options - Mac OS X 10.5/10.6/10.7Selecting Print Layout Options - Mac OS X 10.4 Related topics Loading Paper Slanted Printout If your printouts are slanted, try these solutions: • Slide the edge guide against the edge of the paper. • Sel...

White or Dark Lines in Printout If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint: • Clean the print head. • Make sure the paper type setting matches the type of paper you loaded. • Make sure you loaded the printable side of the paper face...

• Avoid handling printouts on glossy paper right after printing to allow the ink to set. • Turn off any high speed settings in your product software. • If you print on both sides of a sheet of paper, smudges may appear on the reverse side of heavily saturated or dark images. If one side of a sheet w...

• The ink cartridges may be old or low on ink, and you may need to replace them. • Make sure the paper type setting matches the type of paper you loaded. • Make sure your paper is not damp, curled, old, or loaded facedown in the sheet feeder (the printable side should be faceup). • Clean the paper p...

Selecting Printing Preferences - Mac OS X 10.5/10.6/10.7Selecting Printing Preferences - Mac OS X 10.4 Related topics Loading Paper Incorrect Colors If your printouts have incorrect colors, try these solutions: • Make sure the Black/Grayscale or Grayscale setting is not selected in your printer soft...

Scanning Software Does Not Operate Correctly If your scanning software does not operate correctly, try these solutions: • Make sure your computer has adequate memory and meets the system requirements for your operating system. • Make sure your computer is not running in a power-saving mode, such as ...

Solving Scanned Image Quality Problems Check these sections if a scanned image on your computer screen has a quality problem. Image Consists of a Few Dots OnlyLine of Dots Appears in All Scanned ImagesStraight Lines in an Image Appear CrookedImage is Distorted or BlurryImage Colors are Patchy at the...

Image Colors are Patchy at the Edges If you are scanning a thick or warped original, cover its edges with paper to block external light as youscan it. Parent topic: Solving Scanned Image Quality Problems Image is Too Dark If your scanned image is too dark, try these solutions: • Adjust these Epson S...

Related tasks Selecting a Scan Area - Home ModeSelecting a Scan Area - Office ModeSelecting a Scan Area - Professional Mode Scanned Image Edges are Cropped If the edges of a scanned image are cropped, make sure your original is placed correctly for scanning. Ifnecessary, move your original away from...

• Make sure the files on your memory card are in the correct format. • If you have too many photos on your memory card, you may not see all the photos you expect or may be prompted to select a group of photos by date. Reduce the number of photos on your card or selectone group of photos at a time. C...

When to Uninstall Your Product Software If you have a problem that requires you to uninstall and re-install your software, follow the instructions foryour operating system. Uninstalling Product Software - WindowsUninstalling Product Software - Mac OS X Parent topic: Solving Problems Uninstalling Pro...

Parent topic: When to Uninstall Your Product Software Uninstalling Product Software - Mac OS X In most cases, you do not need to uninstall your product software before re-installing it. However, youcan download the Uninstall Center utility from the Epson support website to uninstall your productsoft...

Technical Specifications These sections list the technical specifications for your product. Note: Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. Windows System RequirementsMac System Re...

Mac System Requirements To use your product and its software, your Mac should use one of these operating systems: • Mac OS X 10.4.11 • Mac OS X 10.5.8 • Mac OS X 10.6.x • Mac OS X 10.7 Note: Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for the latest...

Image data 16 bits per pixel per color internal 8 bits per pixel per color internal (maximum) Light source LED Parent topic: Technical Specifications Paper Specifications Use paper under normal conditions: • Temperature: 59 to 77 ºF (15 to 25 ºC) • Humidity: 40 to 60% RH Note: Since the quality of a...

Paper types Plain paper Weight 20 lb to 24 lb (75 g/m 2 to 90 g/m 2 ) Parent topic: Technical Specifications Printable Area Specifications Note: When printing borderless, quality may decline in the expanded printable area. Single sheets 1 Top: 0.12 inch (3 mm) minimum 2 Left: 0.12 inch (3 mm) minimu...

Envelopes 1 Left: 0.12 inch (3 mm) minimum 2 Bottom: 0.20 inch (5 mm) minimum 3 Top: 0.20 inch (5 mm) minimum 4 Right: 0.78 inch (20 mm) minimum Parent topic: Technical Specifications Ink Cartridge Specifications Note: We recommend that you use genuine Epson cartridges and do not refill them. The us...

Cartridge life Opened package: 6 months Unopened package: do not use if the date on the package hasexpired Temperature Storage: –4 to 104 ºF (–20 to 40 ºC) 1 month at 104 ºF (40 ºC) Ink freezes at 10.4 ºF (–12 ºC) Ink thaws and is usable after 3 hours at 77 ºF (25 ºC) Note: For best printing results...

Dimension Specifications Width Stored: 15.4 inches (390 mm) Printing: 15.4 inches (390 mm) Depth Stored: 11.8 inches (300 mm) Printing: 20.8 inches (528 mm) Height Stored: 5.7 inches (145 mm) Printing: 11 inches (279 mm) Weight Approx. 9 lb (4.1 kg) (without ink cartridges and powercord) Parent topi...

Environmental Specifications Temperature Operating: 50 to 95 ºF (10 to 35 ºC) Storage: –4 to 104 ºF (–20 to 40 ºC) 1 month at 104 ºF (40 ºC) Humidity Operating: 20 to 80% RH (non-condensing) Storage: 5 to 85% RH Parent topic: Technical Specifications Interface Specifications Interface type Hi-Speed ...

Safety and Approvals Specifications United States Safety: UL60950-1 EMC: FCC part 15 Subpart B class B Canada Safety: CAN/CSA C22.2 No. 60950-1 EMC: CAN/CSA-CEI/IEC CISPR 22 Class B This equipment contains the following wireless module: • Manufacturer: Marvell Semiconductor Inc. • Type: SP88W8786-MD...

Notices Check these sections for important notices about your product. Note: Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. FCC Compliance StatementSoftware NoticesTrademarksCopyright N...

For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing EquipmentRegulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materielbrouilleur du Canada. Parent topic: Notices Software Notices OPEN SOURCE...

busybox-1.2.2.1 ifupdown-0.6.8 kernel-2.6.18 lsp-arm-versatile926ejs-2.6.18_pro500 module-init-tools-3.2pre1 mount-2.12 net-tools-1.60 netbase-4.29 psmisc-21.5 readline-libs-5.0 sysvinit-2.86 udev-0.093 udhcp 0.9.8cvs20050124-5 util-linux-2.12 usb8786 GNU LGPL This printer product includes the open ...

This printer product includes the open source software program "Net-SNMP" which applies the termsand conditions provided by owner of the copyright to the "Net-SNMP". OpenSSL License/Original SSLeay License This printer product includes the open source software program "OpenSSL to...

This printer product includes the open source software program "libncurses" which applies the terms andconditions provided by owner of the copyright to the "libncurses". "libncurses" Program : libncurses-5.4 linux-ftpd license This printer product includes the open source sof...

Parent topic: Notices Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,without the prior written permission of Seiko Epson Corpor...

THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS,IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL,INCIDENTAL, INDIRECT ...