Epson EHDMC 10- Manuals

Page 2 - Introduction; easily if you have any questions in the future.; Safety Instructions; before reading this guide.; Warning

2 Introduction Thank you very much for purchasing this product.Make sure you read this guide before using the product to ensure you use it safely and correctly. Keep this guide in a safe place so that you can access it easily if you have any questions in the future. Safety Instructions This document...

Page 4 - Caution

4 Except as indicated in the "User's Guide", the case for this product should only be opened by qualified service personnel. Do not disassemble or remodel this product or its consumables. Many sections inside the product carry a high electrical charge which could cause a fire or electric sho...

Page 5 - WARNING; Wash; Wirelessly send images from video devices (Source function); Wirelessly receive images from MOVERIO BT-200 (Sink function); Features; HDMI cable; Note

5 For safety reasons, make sure you unplug the power cable from the electrical outlet when the product is not in use. If the insulation has degraded, a fire could occur. When using this product, make sure it is at least 22 cm (8 inches) away from your body. WARNING : This product contains chemicals,...

Page 6 - Parts and Functions; Ports; micro USB port; plied micro USB cable and AC adapter.; HDMI Output port; Inputs images from other devices.; Included Items; Base unit; tain a commercially available HDMI cable.; Reset button

6 Parts and Functions Ports A micro USB port Supplies power to this unit. Connect to an electrical outlet using the sup- plied micro USB cable and AC adapter. B HDMI Output port Outputs images received from the HDMI Input or Miracast connection. C HDMI Input port Inputs images from other devices. In...

Page 7 - Buttons and Indicators; Slide switch

7 Buttons and Indicators A Slide switch Changes between the Source and Sink functions. B Wireless/Pass-Thru button When sliding the switch to [Source]:Switches the output device between the MOVERIO BT-200 and the device connected to the HDMI Output.When sliding the switch to [Sink]:Switches the inpu...

Page 8 - Sending images from a video device to your MOVERIO BT-200 (Source; Set the slide switch to Source.; Connections; Preparing to Connect (Wireless Mirroring Adapter Operations); to the HDMI Output port, you see the following screen.

8 Wireless/ Pass-Thru Wireless Connect Wireless Ready Link Image sending device Image receiving device Sending images from a video device to your MOVERIO BT-200 (Source function) Connect a commercially available HDMI cable to the HDMI Input port on this unit and to the HDMI output port on the device...

Page 12 - Setting; Hold down the Wireless/Pass-Thru button and the Wireless Connect

12 Setting You can make settings from the MOVERIO BT-200 web browser or on your computer. 1. Hold down the Wireless/Pass-Thru button and the Wireless Connect button at the same time for at least five seconds. The unit enters setup mode and the IP address for the unit is displayed on the device conne...

Page 13 - Troubleshooting; Cannot send or receive images

13 Troubleshooting Cannot send or receive images • Check that the micro USB cable is connected correctly. • Check that the AC adapter is connected to the electrical outlet correctly. • Check that the devices are connected to the HDMI Input or the HDMI Output correctly. • Check that the input source ...

Page 14 - Specifications; No audio is output; Check the volume on the device that is playing the images.

14 Port micro USB x1 (for power)HDMI Input x1HDMI Output x1 Input resolutions HDMI :640x480p @60Hz720x480p @60Hz720x576p @50Hz1280x720p @50/60Hz1920x1080p @24/30HzMiracast :640x480p @60Hz1280x720p @25/30Hz Power supply Power (AC adapter)100 to 240 VAC ± 10% 50/60HzPower (EHDMC10)5 VDC Power consump-...

Page 15 - send and receive image content using this product.; General Notes; Notes Regarding Wireless LAN; ment

15 About Trademarks Miracast™ is a trademark of the Wi-Fi Alliance.HDMI is a trademark or registered trademark of HDMI Licensing LLC. Information on Supported Devices Visit the http://www.epson.com web site for information on devices that can send and receive image content using this product. Genera...

Page 16 - Wireless Telegraphy Act Regulations; The following acts are prohibited by the Wireless Telegraphy Act.; Restriction of Use; product's suitability after a full evaluation.; Notes on Frequency; being used in the vicinity.

16 Wireless Telegraphy Act Regulations The following acts are prohibited by the Wireless Telegraphy Act. • Modifying and disassembling (including the antenna) • Removing the label of conformance Restriction of Use This product is manufactured based on the specifications of the country of sale. When ...

Page 19 - cause undesired operation of the device.

19 This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numèrique de la classe B est conforme à la norme NMB-003 du Canada.This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. End-users must follow the specific operating instruct...