Epson C51CD69070 - Manuals

Notations Used in the Documentation Follow the guidelines in these notations as you read your documentation: • Warnings must be followed carefully to avoid bodily injury. • Cautions must be observed to avoid damage to your equipment. • Notes contain important information about your label printer. • ...

6 Tape ejection slot 7 Tape cover Back 1 Bluetooth button 2 Power port 3 USB port 4 Battery cover 5 Security cable attachment point Parent topic: Introduction to Your LabelWorks Printer 10

Setting Up the Printer Follow the instructions in these sections to set up your label printer. Connecting the AC AdapterInstalling BatteriesInserting and Removing Tape CartridgesTurning the Printer On and Off Connecting the AC Adapter Use the AC adapter to power the printer without batteries. 1. Con...

3. Replace the battery cover. Parent topic: Setting Up the Printer Inserting and Removing Tape Cartridges You can use LabelWorks tapes with widths ranging from approximately 0.25 inch (6 mm) to 1 inch (24mm). Use only tape cartridges with this mark: For a complete list of available tape cartridges, ...

Turning the Printer On and Off Make sure the AC adapter is connected or batteries are installed. • To turn on the printer, press the power button. The Bluetooth light turns on. Note: The Bluetooth light flashes at differing intervals depending on the Bluetooth status. • To turn off the printer, pres...

Using the Label Printer With Your Mobile Device Follow the instructions in these sections to use the label printer with your mobile device. Installing iLabelEnabling Bluetooth Discovery ModeConnecting the Label Printer to Your Mobile Device Installing iLabel Download the Epson iLabel app from the Go...

2. Press the power button and the Bluetooth button at the same time. The printer powers on and the Bluetooth light pulses. 3. Pair your device to the printer using the instructions for your device's operating system. Parent topic: Using the Label Printer With Your Mobile Device Connecting the Label ...

Pairing is complete when the printer is listed in the paired devices list. Note: The Bluetooth icon in the status bar on your device does not change after pairing is complete, nor does the connection status display on the Bluetooth settings screen. 5. Open iLabel. 6. Tap the icon. 7. Tap Printer . 8...

Using the Printer With Your Computer Follow the instructions in these sections to use the label printer with your computer. Connecting the Printer to Your ComputerUsing Label Editor for WindowsUsing Label Editor Lite for OS X Connecting the Printer to Your Computer To use the software with your Labe...

Getting Started With Label Editor Follow the instructions in these sections to get started using Label Editor for Windows. Installing Label EditorStarting Label EditorLabel Editor Main WindowLabel Editor Toolbars Parent topic: Using Label Editor for Windows Installing Label Editor Download the softw...

Label Editor Main Window 1 Operation guide bar 2 Edit toolbar 3 Text toolbar 4 Font box 5 Green handle 6 Label area (The red line indicates the area that will be printed.) 7 Workspace (You can temporarily move a block to this area outside the label.) 8 Font size box 9 Layout toolbar 10 Standard tool...

Redo the last undo action Open the properties window for the selected block Feed the tape Feed and cut the tape Layout toolbar Rotate the selected block 90° counterclockwise Rotate the selected block 90° clockwise Center the selected block vertically on the label Center the selected block horizontal...

Text toolbar Make the selected text bold Make the selected text italic Underline the selected text Reverse the selected text and background (change black text on white background to white onblack) Change the text style Click the arrow next to the icon to select outlining and other special effects Al...

Setting Default Preferences in Label EditorWorking With Blocks in Label EditorAdding Borders in Label EditorInserting Images in Label EditorInserting Symbols in Label EditorInserting Barcodes in Label EditorInserting QR Codes in Label EditorInserting Tables in Label EditorInserting the Date and Time...

2. Enter text in the label, then click outside the label. You see your text on the label surrounded by a red line with green handles like this: 28

Your text appears as you type it in. 3. To select the text block you have typed, click outside the text. Green handles appear around the text block: 4. Do any of the following: • To move the block, simply click and drag it as desired. You can add multiple blocks to a label by dragging them to the ri...

Related tasks Working With Blocks in Label Editor Inserting Images in Label Editor You can add your own logos, photos, or graphics to your labels and ribbons. 1. Click the Image icon. 2. Locate and select the file you want to use on your computer and click Open . You see an outline of your image blo...

8. When you are finished, click OK . Parent topic: Designing Labels With Label Editor Related tasks Working With Blocks in Label Editor Inserting Symbols in Label Editor You can select from a variety of ready-made graphic symbols to use in your labels and ribbons. 1. Click the Symbol icon. You see t...

5. Adjust the size and position of the symbol and text. 6. To adjust the symbol format, if necessary, double-click the symbol. You see this window: 7. Select any of the tabs to display the available options. 8. Select the options you want. 9. When you are finished, click OK . Parent topic: Designing...

Parent topic: Designing Labels With Label Editor Related tasks Working With Blocks in Label Editor Inserting QR Codes in Label Editor You can create labels with a QR code for many purposes, such as linking to URLs, file storage services,or social media applications. One-inch (24 mm) wide black-on-wh...

Related tasks Working With Blocks in Label Editor Inserting Tables in Label Editor You can add customized tables to your labels. 1. Click the Table icon. You see this window: 2. Select the table settings you want to use and click OK . The table appears on your label. 3. To resize the table, click an...

5. Select any of the tabs to display the available options. 6. Select the options you want. 7. When you are finished, click OK . Parent topic: Designing Labels With Label Editor Related tasks Working With Blocks in Label Editor Inserting the Date and Time in Label Editor You can add the date and/or ...

2. Do one of the following: • Select one of the available background patterns. • To create your own pattern, click Original Background Pattern , and click New . You see this window: 42

Use the tools to design your pattern and click OK . Once you have designed a pattern, Label Editor saves it with the ready-made background patterns you can use it again. • To create a text background pattern, click Text Background Pattern . You see this window: Enter the text for your background, th...

Editing Text Design in Label Editor You can use the Text Settings window to apply more text formatting options to your label than thoseavailable in the Text toolbar or Text menu. 1. Click a text block on the Label Editor main screen to select it. You see green handles around the selected block. 2. C...

Creating Numbered Label Sequences in Label Editor Parent topic: Using Label Editor for Windows Creating Labels from Imported Data in Label Editor You can create a series of labels using the data from one or more spreadsheet columns. This lets youquickly create address labels from your entire address...

4. Click the Import icon. You see a window like this: 5. Select one of the columns that you want to import and click OK . You see the outline of an import frame. 6. Drag the frame where you want the data to appear on your label. 50

You see the data from the current row on the label layout: 7. Repeat steps 5 and 6 until all the data you want to import appears on the label. 8. Adjust the size and position of the import frames as necessary. 9. To save your label project, click the Save icon, enter a file name, and click Save . 10...

12. Select the number of labels you want in the Copies box. 13. Select the options you want in the Data Importing section. 14. Click OK to print your labels. Parent topic: Creating Special Format Labels Using Label Editor Related tasks Creating Equipment Management Labels in Label EditorPrinting Lab...

Creating Ribbons With Repeated Patterns in Label Editor You can easily create ribbons with repeated patterns of text and graphics. Load ribbon tape in your labelprinter before you print. Note: For best results, turn off the auto cutter and use scissors to cut the ribbon. 1. Enter the text for your l...

2. Select a category on the left, then scroll through the label images to select the one you want. Note: To limit your selection to the tape width you are using, click the arrow under Tape Width and select the width. 3. To edit a selected label, click Edit . You see the label on the Label Editor scr...

8. Select the Font, Size, Text Position, and Style options as necessary for the sequence. 9. Click OK . You see the outline of your sequence number block on the Label Editor main screen. 10. Drag the sequence block where you want the number to appear, then click to display it on your label. 11. If y...

15. Select the Paginate with Alphanumeric Sequence checkbox. 16. Click OK to print. Parent topic: Creating Special Format Labels Using Label Editor Printing Labels With Label Editor Follow the instructions in these sections to print using Label Editor. Printing Labels in Label EditorLabel Editor Pri...

8. To select additional printing options, click Printer Settings . You see this window: 9. Select any of the tabs to display the available options. 10. Select the options you want. 11. Click OK to close the window. 12. Click OK to print. Parent topic: Printing Labels With Label Editor Related refere...

Print-Paste Printing in Label Editor You can create labels from imported data and select individual data fields or columns to print onseparate labels. For example, instead of including the item name, code, and price on one label, you cancreate three separate labels, one for each item. This is called...

Using Label Editor Lite for OS X The Label Editor Lite software makes it easy to create labels using a Mac, as described in thesesections. Getting Started With Label Editor LiteDesigning Labels With Label Editor LiteFeeding and Cutting the Tape in Label Editor LitePrinting Labels With Label Editor L...

Starting Label Editor Lite After you have installed the Label Editor Lite software and connected the printer to your computer, youcan start using Label Editor Lite. 1. Choose Applications > Label Editor Lite . You see the main screen: Parent topic: Getting Started With Label Editor Lite Related t...

Label Editor Lite Main Window 1 Label preview area 2 File area 3 History area 4 Insert area 5 Text editing area 6 Font settings list 7 Tape length settings area 8 Tape width settings area 9 Printing area 10 Zoom area 70

Parent topic: Getting Started With Label Editor Lite Designing Labels With Label Editor Lite Follow the instructions in these sections to design a variety of label and ribbon types. Setting Default Preferences in Label Editor LiteCreating a Basic Label in Label Editor LiteFormatting Text in Label Ed...

2. Select the options you want to use as default settings. Note: The settings are applied to the next object you create. 3. Click OK . 4. Click OK again. You return to the main window. Parent topic: Designing Labels With Label Editor Lite 72

Creating a Basic Label in Label Editor Lite You can easily create a label with text and graphics and print it on your label printer. 1. Start Label Editor Lite. You see the main Label Editor Lite screen: 2. Select the printer and tape width, 3. Enter the text for your label in the text field. The te...

5. To save your label, click the save icon, enter the file name, select any tags, and click Save . 6. When you are ready to print, click the print icon. You see a window like this: 7. Select the number of labels you want in the Copies box. 8. Click Print . You see a tape width confirmation message. ...

2. Do any of the following: • Change the font by selecting it in the font list • Emphasize the text using the bold, italic, underline, or strikethrough buttons or menu options • Change the text justification using the left justify, center, or right justify buttons or menu options • Change the font s...

5. Click OK . Parent topic: Designing Labels With Label Editor Lite Inserting the Date and Time in Label Editor Lite You can add the date and/or time to your labels and have it automatically updated. 1. Click the date icon. You see this window: 2. Select the date format option you want to use. 3. Cl...

2. Click the border icon. You see this window: 3. Select the Border, Line Style, and Line Thickness options you want to use. 4. Click OK . The border appears in the label. Parent topic: Designing Labels With Label Editor Lite Inserting QR Codes in Label Editor Lite You can create labels with a QR co...

Note: When embedding content from social media applications, consider your privacy settings. When embedding content from file storage services, check the sharing settings to ensure that other people canview the content. 1. Click the QR code icon. You see this window: 2. Enter the URL or other text i...

2. Click the arrow to expand the list of template files. Note: Template previews appear in the template window. 3. Select a template and click OK . The template opens on the Label Editor Lite main screen. 4. Edit the template as you would any other label. Parent topic: Designing Labels With Label Ed...

Printing Labels With Label Editor Lite When you have finished designing a label, you are ready to print. 1. Click the print icon. You see a window like this: 2. Select the number of copies. 3. Select the Mirror Print checkbox if you want the label to print on clear tape to be used on a transparent s...

Applying Your Labels Follow the instructions in these sections to apply your printed labels. Applying Standard LabelsIron-on Labels Applying Standard Labels Your printed labels are easy to attach to most surfaces. Caution: Depending on the environment and the surface to which you attach them, labels...

Parent topic: Applying Your Labels Iron-on Labels You can apply iron-on labels to the following types of fabric: • 100% cotton • 100% linen • 100% polyester • Cotton/polyester blends • Fabrics with a flat, smooth surface Note: Do not apply iron-on labels to textured fabrics such as terry cloth, cord...

• Never clean the labels with chemicals or solvents such as benzine, thinner, or alcohol. Otherwise, the print on the label may become faint or distorted. • If labels are exposed to direct sunlight for long periods of time, yellowing may occur. • Iron-on labels do not adhere to non-fabric materials ...

Cleaning the Printer Follow the instructions in these sections to clean your label printer. Cleaning the Outside of the PrinterCleaning the Print Head Cleaning the Outside of the Printer Before cleaning the printer, turn off the power and unplug the AC adapter. • To remove dust or dirt, use a soft, ...

Solving Problems Check the solutions in this section if you have any problems using the printer. Checking for Software UpdatesProduct Error MessagesSolutions to Problems Pairing with BluetoothSolutions When the Printer Does Not PrintSolutions to Computer Printing ProblemsSolutions When Print Quality...

Related references Where to Get Help Related tasks Inserting and Removing Tape CartridgesInstalling Batteries Solutions to Problems Pairing with Bluetooth If you connected your mobile device to your printer using Bluetooth, try these solutions: • Make sure the mobile device's Bluetooth is turned on....

Related tasks Installing BatteriesInserting and Removing Tape CartridgesConnecting the AC AdapterTurning the Printer On and Off Solutions to Computer Printing Problems If you are having trouble printing from your computer, try these solutions: • Check for messages on the computer screen. • Make sure...

Creating a Basic Label in Label Editor LiteCreating a Basic Label in Label EditorPrinting Labels in Label EditorPrinting Labels With Label Editor Lite Solutions to Tape Cutting Problems If the printer does not cut after printing, try these solutions: • Make sure the cut setting is selected in the so...

Parent topic: Solving Problems Related tasks Applying Standard Labels Solutions to Problems With Iron-on Labels If you are having trouble applying an iron-on label, try these solutions: • If labels curl after ironing or fall off after washing, try raising the iron temperature (within the suggested t...

• Description of the problem Then call: • U.S.: (562) 276-7245, 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday • Canada: (905) 709-2567, 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday Days and hours of support ...

Technical Specifications These sections list the technical specifications of your printer. Label Editor Software System RequirementsLabel Editor Lite Software System RequirementsMobile Device System RequirementsLabel Printer SpecificationsLabel Printer Power Supply Specifications Label Editor Softwa...

Operating system OS X 10.9 OS X 10.8.x OS X 10.7.x OS X 10.6.x Hard drive space About 40MB Display 1024 × 768 (XGA) or higher resolution Interface USB 1.1 Full-speed Note: Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada) for the latest in compatibility and drive...

Label Printer Specifications Dimensions Width: (approximate) 2.1 inches (54 mm) Depth: 5.2 inches (132 mm) Height: 5.7 inches (146 mm) Weight 0.97 lb (440 g) (approximate; excludingbatteries and tape cartridge) Supported tape widths 1/4, 3/8, 1/2, 3/4, and 1 inch (6, 9, 12, 18, and 24 mm) Interfaces...

Battery AA alkaline battery × 6 Parent topic: Technical Specifications 97

Notices Check these sections for important notices about your label printer. Note: Epson offers a recycling program for end of life products. Please go to epson.com/recycle for information on how to return your products for proper disposal. Important Safety InstructionsFCC Compliance StatementTradem...

• Do not block or insert objects into the AC adapter port or tape ejection slot. • Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust. • Do not place or store the product in the following locations: outdoors or in direct sunlight; near sources of exc...

Related tasks Printing Labels With Label Editor Lite AC Adapter Safety Instructions • Use only the AC adapter and power cord that came with your product. Do not use the AC adapter with any other equipment and use only with the specified voltage. Using the wrong AC adapter and powercord may result in...

• Insert batteries so that the polarities (+ and –) are correct. • Remove dead batteries promptly. • Do not heat batteries or throw them in fire or water. • Do not remove batteries with metal objects such as tweezers or the tip of a pen. • Make sure to follow local battery disposal regulations. Pare...

established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shieldedequipment interface cable with this device. If this equipment has more than one interface connector, donot leave cables connected to unused interfaces. Changes or modifications not expressly a...

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of anyoptions or any consumable products other than those designated as Original Epson Products or EpsonApproved Products by Seiko Epson Corporation. Seiko Epson Corporation shall not be held liable for any ...