Epson C11CA86201 - Manuals

Introduction 5 Introduction Your Epson Stylus ® Photo R3000 Series printer gives you exhibition quality prints on a wide variety of glossy and matte papers in many sizes. Your outstanding printouts result from these advanced features: ■ Epson UltraChrome K3 ® with Vivid Magenta ink cartridges for un...

6 Loading Paper Loading Paper You can print on a variety of paper types in the sheet feeder, or use the manual feed tray for fine art papers (see page 8) and thick media such as poster board (see page 14). To print multiple photos, panoramics, and banners, load roll paper using the roll paper holder...

8 Loading Paper Always load paper short edge first, even for landscape printing. Load letterhead or pre-printed paper top edge first. Note: The edge guide moves slightly during paper feeding and printing. Do not adjust it while printing is in progress. Loading Fine Art Paper You can print profession...

Loading Paper 11 Loading Roll Paper You can load roll paper for printing large images, panoramic images, or multiple photos, with or without borders. You can load 13-inch wide roll paper. (See page 16 for a list of roll paper types and sizes.) Tip: It’s a good idea to check the ink status and replac...

Loading Paper 13 Removing Roll Paper Prints and Roll Paper 1. When printing is finished, you see this screen: Select Yes to print a cut line and feed the paper. (If you select No , you return to the Ready screen. Select this option to continue printing on the same roll.) 2. Use scissors to cut the p...

14 Loading Paper Loading Thick Media Use the manual feed tray to load 13 × 19-inch media that is 0.7 to 1.3 mm thick. Note: Be sure to leave at least 13 inches (32 cm) of space behind the printer for the media to feed through. 1. Turn on the printer. 2. Remove any roll paper or paper loaded in the s...

16 Loading Paper 8. Extend the output tray. Note: To eject paper, make sure the control panel shows Ready and press the + button. Do not extend the manual feed tray while printing, or you may damage the printer. Available Epson Papers Epson offers a wide array of high quality papers, making it easy ...

20 Printing From Start to Finish Printing From Start to Finish This section describes basic printing from your Windows ® or Macintosh ® computer. For detailed instructions, see the online User’s Guide . You can also print label designs directly onto ink jet-printable CDs or DVDs. See page 30 and the...

24 Printing From Start to Finish This window appears and shows the progress of your print job. Note: If you’re printing on roll paper, see page 13 for instructions on removing your printed photos and paper. Printing With Mac OS X Follow the steps below to print from Mac OS ® X 10.5 to 10.6. 1. Open ...

28 Printing From Start to Finish Selecting the Correct Paper Type Select the correct Media Type setting in your printer software (see page 21 for Windows or page 26 for Mac OS). This adjusts ink coverage for your media. * Mac OS: When printing with Photo Black ink, select the PK (Photo Black) option...

30 Printing on CDs and DVDs Printing on CDs and DVDs You can use your R3000 Series and the Epson Print CD software that came with it to print label designs directly onto ink jet-printable CDs or DVDs. To prevent errors, you should burn files, music, or video onto your CD or DVD before printing. Foll...

32 Printing on CDs and DVDs 6. Line up the arrows on the CD/DVD tray with the line on the manual feed tray. Make sure the CD/DVD tray is flush against the right. 7. Press the OK button. The CD/DVD tray loads inside the printer. Printing on a CD or DVD When you installed the software for the R3000 Se...

34 Printing on CDs and DVDs Removing Your Printed CD/DVD After your CD or DVD is printed, the tray ejects partially from the R3000 Series. Pull out the tray and remove the disc. After printing, handle the printed CD or DVD carefully. You may need to wait up to 24 hours for the ink to dry fully befor...

Maintaining Your Printer 35 Maintaining Your Printer Follow the steps in these sections to keep the R3000 Series working at its best: ■ “Checking and Cleaning the Print Head” below ■ “Checking and Aligning the Print Head” on page 37 ■ “Checking the Ink Cartridge Status” on page 37 ■ “Replacing Ink C...

36 Maintaining Your Printer Cleaning the Print Head If print quality has declined and the nozzle check indicates clogged nozzles, you can clean the print head. Print head cleaning uses ink, so clean it only if necessary. Note: You cannot clean the print head if an ink cartridge is expended, and may ...

Maintaining Your Printer 37 Checking and Aligning the Print Head If your printouts become grainy or blurry, or you see dark or light bands across them, you may need to align the print head. Note: Banding may also occur if your print head nozzles need cleaning (see page 35). 1. Load a few sheets of E...

Maintaining Your Printer 39 Replacing Ink Cartridges You can purchase genuine Epson ink and paper at Epson Supplies Central at www.epson.com/ink3 (U.S. sales) or www.epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized reseller. To find the nearest one, call 800-GO-EPSO...

Maintaining Your Printer 43 Switching Black Ink Types Your printer comes with Matte Black and Photo Black ink cartridges. Although both must be installed for the printer to work, the printer can use only one type of ink at a time. The printer will switch ink automatically, depending on the type of m...

44 Maintaining Your Printer The following media use Photo Black ink: ■ Photo Paper Glossy ■ Premium Photo Paper Glossy ■ Ultra Premium Photo Paper Glossy ■ Premium Photo Paper Semi-gloss ■ Ultra Premium Photo Paper Luster ■ Exhibition Canvas Satin ■ Exhibition Fiber Paper Select the Black Ink Type S...

Maintaining Your Printer 45 Cleaning the Rollers If you notice lines or streaks on your printouts, you may need to clean the rollers inside the printer by feeding several sheets of plain paper through it. Note: If paper dust builds up on the rollers, they may lose traction and become unable to feed ...

46 Network Setup Network Setup Make sure you follow the instructions on the Start Here sheet to set up your product, choose your connection, and install the software. The online instructions during the installation process help you set up your network connection. Follow the instructions in this chap...

Network Setup 47 Installing for the First Time Before you begin, make sure that you have the following information ready and write it in the space provided below: ■ Network name (SSID): _________________________________________ ■ Network password: ____________________________________________ Note: I...

50 Network Setup Setting Up With the Printer Buttons If you are using Mac OS X 10.6, or you don’t have a USB cable to set up the product on your wireless network, follow these steps to set it up using the printer buttons: 1. Follow the instructions on the screen to start the product’s wireless Setup...

52 Network Setup Entering Your SSID Manually If your network doesn’t broadcast its name (SSID), follow these steps to enter it: 1. From the Select SSID screen on the product control panel, press u or d to select Other SSIDs , then press OK . 2. Use the arrow buttons on the control panel to enter you...

Network Setup 55 4. When you see the Software Installation screen, click Install . 5. When you see this screen, select Wired network connection and click Next . 6. When you see the Network Setup screen, do one of the following: ■ For a first-time installation, select Set up printer for the first tim...

Solving Problems 57 Solving Problems If you have a problem with your Epson product, check the messages on the LCD screen to diagnose the cause. You can also check the basic troubleshooting suggestions below or in your online User’s Guide . The User’s Guide provides detailed help and easy access to E...

58 Solving Problems ■ When using the manual feed tray, load only one sheet of compatible paper (see page 8). ■ Make sure the paper size settings in the printer software are correct for the paper you loaded. Paper Feeding Problems ■ If paper doesn’t feed into the sheet feeder, remove the paper and fa...

Solving Problems 59 CD/DVD Printing Problems ■ If the CD/DVD tray won’t load or jams in the printer, gently pull out the CD/DVD tray and press OK . Reload the CD/DVD tray, making sure to insert the tray correctly in the tray guide and align the arrows (see page 32). ■ If your image is not positioned...

60 Solving Problems Network Problems If you have a poor wireless connection, try moving the product to a different location. Avoid placing it next to a microwave oven, 2.4 GHz cordless phone, or large metal object such as a filing cabinet. Note: For optimal print speed, your wireless router and/or l...

Solving Problems 61 Where to Get Help Epson Technical Support Internet Support Visit Epson’s support website at epson.com/support (U.S.) or epson.ca/support (Canada) and select your product for solutions to common problems. You can download drivers and documentation, get FAQs and troubleshooting adv...

62 Notices Notices Important Safety Instructions Before using your R3000 Series, read and follow these safety instructions: ■ Be sure to follow all warnings and instructions marked on the R3000 Series. ■ Use only the type of power source indicated on the R3000 Series label. ■ Place the R3000 Series ...

Notices 63 ■ Except as specifically explained in your documentation, do not attempt to service the R3000 Series yourself. ■ Unplug the R3000 Series and refer servicing to qualified service personnel under the following conditions: if the power cord or plug is damaged; if liquid has entered the produ...

64 Notices Wireless Network Safety ■ Do not use this product inside medical facilities or near medical equipment. Radio waves from the product may adversely affect the operation of medical equipment. ■ Keep this product at least 9 inches (22 cm) away from cardiac pacemakers. Radio waves from this pr...

66 Notices Declaration of Conformity According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: We: Epson America, Inc. Located at: MS 3-133840 Kilroy Airport WayLong Beach, CA 90806Telephone: (562) 98...

Notices 67 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential ...