Epson AcuLaser M2000DN- Manuals

Safety Instructions Warnings, Cautions, and Notes w Warnings must be followed carefully to avoid bodily injury. c Cautions must be observed to avoid damage to your equipment. Notes contain important information and useful tips on the operation of your printer. Safety Precautions Be sure to follow th...

❏ Never force the printer’s components into place. Although the printer is designed to be sturdy,rough handling can damage it. ❏ When removing the developer cartridge, never touch the developing roller under the flap;otherwise, print quality will decline. ❏ When handling the developer cartridge, alw...

❏ Be careful not to scratch the surface of the drum. When you remove the photoconductor unitfrom the printer, always place the unit on a clean, smooth surface. Avoid touching the drum,since oils from your skin can permanently damage its surface and affect print quality. ❏ To get the best print quali...

❏ Connect your printer to an electrical outlet that meets the power requirements of this printer.Your printer’s power requirements are indicated on a label attached to the printer. If you arenot sure of the power supply specifications in your area, contact your local power company orconsult your dea...

❏ Unplug this printer from the wall outlet and refer servicing to qualified service personnelunder the following conditions: A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into it. C. If it has been exposed to rain or water. D. If it does not operate normally when...

Laser safety labels w Warning: The performance of procedures and adjustments other than those specified in this guide mayresult in hazardous radiation exposure. Your printer is a Class 1 laser product as defined in the IEC 60825-1:2001 specifications.The label shown on the right is attached to the b...

Minimize the risk To minimize the risk of exposure to ozone, you should avoid the following conditions: ❏ Use of multiple laser printers in a confined area ❏ Operation in conditions of extremely low humidity ❏ Poor room ventilation ❏ Long, continuous printing together with any of the above Printer l...

Chapter 1 Product Information Printer Parts Front view EPL-6200 a b c d e f g EPSON AcuLaser M1200 Series User’s Guide Product Information 16 Downloaded from ManualsPrinter.com Manuals

AcuLaser M1200/EPL-6200L a b c d e g a. Output coverb. Output trayc. Control paneld. Front covere. MP (Multi-Purpose) trayf. Manual feed slot (EPL-6200 only)g. Power switch Rear view EPL-6200 a b c d e g EPSON AcuLaser M1200 Series User’s Guide Product Information 17 Downloaded from ManualsPrinter.c...

EPL-6200 Network model a b c d f g AcuLaser M1200/EPL-6200L a b d a. AC inletb. USB interface connectorc. Duplex Unit connector (EPL-6200 only)d. Parallel interface connectore. Type B interface slot (EPL-6200 only)f. Ethernet interface connector (EPL-6200 Network model only)g. Right side cover (EPL-...

Indicator lights EPL-6200 a b c d e f AcuLaser M1200/EPL-6200L e d a Memory Usually turns on or flashes in combination with other lights to indicate amemory-related error or warning. b Toner On when the printer’s developer cartridge has run out of toner. Flashesto indicate that toner is running low....

f Data On when data is received and stored in the print buffer (the section ofmemory reserved for receiving data) but not yet printed. Flashingindicates that the printer is processing data. When no data remains inthe print buffer, this light is off. Consumable Products To purchase consumable product...

Chapter 2 Paper Handling Paper Sources This section describes the combinations of paper sources and paper types that you can use. MP tray Paper Type Capacity Paper Size Plain paper EPL-6200 Up to 250 sheets of 75 g/m2 paper(Weight: 60 to 90 g/m2, 16 to 24 lb) AcuLaser M1200/EPL-6200L Up to 150 sheet...

❏ The printer is extremely sensitive to moisture. Be sure to store your paper in a dry environment. ❏ The use of colored paper is acceptable, but coated paper should be avoided. ❏ You may use paper with preprinted letterheads, provided that the paper and ink are bothlaser-printer compatible. MP tray...

4. Raise the output tray. Note: ❏ Before printing, make sure that the Paper Size setting in your printer driver matches the paperyou load. ❏ If you want to print on paper heavier than 90 g/m2 (24 lb) or on special paper (such as envelopes,labels, transparencies, or thick paper), see “Printing on Spe...

This product can print on special paper stock such as labels, envelopes, thick paper, andtransparencies. Labels You can load up to 10 sheets of labels into the MP tray. However, you may need to feed some typesof labels one sheet at a time. To prevent the adhesive from coming into contact with printe...

AcuLaser M1200/EPL-6200L To print on envelopes, choose Thick Narrow from the Paper Type drop-down list in the printer driver. The print quality on envelopes may be irregular because different parts of an envelope havedifferent thicknesses. Print one or two envelopes to check the print quality. If th...

When printing on transparencies, make sure to choose Transparency from the Paper Type drop-down list in the printer driver. EPSON AcuLaser M1200 Series User’s Guide Paper Handling 28 Downloaded from ManualsPrinter.com Manuals

Chapter 3 Using the Printer Driver For Windows About the Printer Software The printer driver lets you choose from a wide variety of settings to get the best results from yourprinter, while the EPSON Status Monitor 3 lets you check the status of your printer. The printer driver is included in the CD-...

Note for Windows Vista users: Do not press the power button or put your computer to standby or hibernate mode manually duringprinting. Accessing the printer driver You can access the printer driver from any application program, or directly from your Windowsoperating system. The printer settings made...

2. Select the Zoom Options check box. 3. Select the desired paper size from the Output Paper drop-down list. The page will be printed to fit on the paper you have selected. 4. Select Upper Left for Location to print the enlarged or reduced page image at the upper left corner of the paper. Select Cen...

3. Select the Zoom To check box. 4. Specify the magnification percentage in the box, then click OK . The percentage can be set between 50 % and 200 % in 1 % increments. If necessary, select the paper size to be printed from the Output Paper drop-down list. Modifying the print layout “Layout printing...

2. Select the Print Layout check box, and click Print Layout Settings . The Print Layout Settings dialog box appears. 3. Select the number of pages you want to print on one sheet of paper. 4. Select the Page Order in which the pages are printed on each sheet. Note: The Page Order choices depend on t...

Using watermarks Follow the steps to use a watermark on your document. In the Watermark dialog box, you canselect from a list of predefined watermarks, or you can select a bitmap (.BMP) or text (.TXT) file asyour own custom watermark. The Watermark dialog box also allows you to make a variety ofdeta...

4. Select a watermark from the Watermark Name drop-down list. 5. Select the location on the page where you want to print the watermark from the Location list box. 6. Adjust the horizontal or vertical Offset position. 7. Adjust the image intensity of the watermark with the Intensity slider bar. 8. Ad...

6. If you select Text , type the watermark text in the Text box. If you select BMP , click Browse , and select the BMP file you want to use, then click OK . Note: Before making a custom watermark, you should prepare a bitmap (.bmp) file. 7. Click Save to close the User Defined Watermarks dialog box....

Avoiding Insufficient Memory Error (AcuLaser M1200/EPL-6200L) When you print graphics or a large amount of data, the printer may stop due to insufficientmemory. Follow the steps below to avoid memory errors and continue printing. Note: Print quality will decrease when you use this function. 1. Click...

Accessing the EPSON Status Monitor 3 You can access the EPSON Status Monitor 3 from any application program, or from yourWindows operating system. ❏ The EPSON Status Monitor 3 appears automatically when an error occurs. ❏ To access the EPSON Status Monitor 3 from your application, click the Print or...

Getting printer status details You can monitor printer status and obtain information on consumable products using the EPSONStatus Monitor 3 dialog box. AcuLaser M1200 1 Icon/Message Shows the printer status. 2 Printer image The image at the upper left shows the printer status graphically. 3 Text box...

AcuLaser M1200/EPL-6200L The following settings and buttons appear in the dialog box: 1 Select Notification Use the check boxes in this area to select the types of error that you wishto be notified about. Note: You can choose Once a day for consumable. Once a day: When a notification occurs, it is d...

5 More Settings button Allows to you change more settings. Note: If you change the settings, they are applied to all printers that have thesame user interface. 6 OK button Saves new changes. 7 Cancel button Cancels any changes. 8 Help button Opens online help for the Monitoring Preferences dialog bo...

5 Do not display thiswindow automatically check box When this check box is selected, the Order Online window appearsautomatically only when a replacement part first becomes low or reachesend of service life. More Settings (AcuLaser M1200/EPL-6200L) You can monitor over routers or use the SMB protoco...

If you wish to see information about printer consumables, click Consumables . Once this button is clicked, the Status Alert window will not disappear even after a problem is cleared. To close thebox, you need to click Close . Stopping monitoring You can stop monitoring the printing status by clearin...

For Windows Vista, XP, and 2000, select the USBXXX USB port in the list on the Ports tab. Note: This screen may vary depending on your operating system version. 4. Click OK to save the settings. Canceling Printing If the printouts are not what you expected and contain incorrect or garbled characters...

Double-click the printer icon on the task bar. Select the task in the list, then click Cancel from under the Document menu. After the last page is output, the Ready light on the printer turns on. The current job is canceled. Cancelling from the EPSON Status Monitor 3 window (AcuLaser M1200/EPL-6200L...

Chapter 4 Using the Printer Driver For Macintosh About the Printer Software The printer driver lets you choose from a wide variety of settings to get the best results from yourprinter, while the EPSON Status Monitor 3 lets you check the status of your printer. The printer driver is included in the C...

Mac OS X To access the printer driver, register your printer in Print & Fax (for Mac OS X 10.5), Printer Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2), click Print on the File menu of any application, then select your printer. From an application ❏ To open the Pa...

Note: Print quality will decrease when you use this function. 1. Open the Extension Settings dialog box. 2. Select the Avoid Insufficient Memory Error check box. Printing watermarks (AcuLaser M1200 only) This function allows you to print a text-based or image-based watermark on your document. For Ma...

Making a new watermark (AcuLaser M1200 only) For Mac OS X 10.5 users 1. Open the print dialog box. 2. Select Printer Settings from the drop-down list and click the Stamp Function button. 3. Select the Watermark Settings tab, then select the Watermark check box. 4. Select Text or Image, then click . ...

Printing headers and footers (AcuLaser M1200 only) This function allows you to print user name, computer name, date, time, or collate number, at thetop or bottom of each page in a document. For Mac OS X 10.5 users 1. Open the print dialog box. 2. Select Printer Settings from the drop-down list and c...

Monitoring Your Printer with EPSON Status Monitor 3 About the EPSON Status Monitor 3 The EPSON Status Monitor 3 is a utility program that monitors your printer and gives youinformation about its current status. For example, you can find out the amount of the remainingservice life of the developer ca...

AcuLaser M1200 1 Icon/Message Shows the printer status. 2 Printer image The image at the upper left shows the printer status graphically. 3 Text box The text box next to the printer image displays the current status of theprinter. When a problem occurs, the most probable solution is displayed. 4 Clo...

Changing the Printer Settings You can change the settings on the printer, such as paper source, paper type, and paper qualityusing EPSONRemotePanel. For Mac OS X 10.5 users 1. Open System Preferences , and click the Print & Fax icon. 2. Select your printer from the Printers list, and click Open ...

For Mac OS X users 1. Open the Applications folder on your hard drive, then open the Utilities folder and double-click the Print & Fax (for Mac OS X 10.5), Printer Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2) icon. 2. Click Add Printer in the Printer List dialog...

2. Insert the printer software CD-ROM into your Macintosh. 3. Double-click the Mac OS X folder. 4. Double-click the Printer Driver folder. 5. Double-click your printer’s icon. Note: If the Authorization dialog box appears, enter the Password or phrase , and then click OK . 6. When the software licen...

Chapter 5 Setting Up Your Printer on a Network (AcuLaser M1200) For Windows Users Sharing the printer This section describes how to share the printer on a standard Windows network. The computers on a network can share a printer that is directly connected to one of them. Thecomputer that is directly ...

Follow the steps below to set a Windows Vista, Vista x64, XP, XP x64, or 2000 as a print server,then install the additional drivers. Note: You must access Windows XP, XP x64, or 2000 as the Administrators of the local machine. 1. For a Windows Vista or Vista x64 print server, click Start , click Con...

For a Windows 2000 print server, select Shared as , then type the name in the Share Name box. 4. Select the additional drivers. Note: If the computers of the server and clients use the same OS, you do not have to install theadditional drivers. Just click OK after step3. On the Windows XP, XP x64, or...

Server Name Client OS Driver Windows XP x64 * Windows XP or 2000 clients x86 Windows 2000, Windows XPand Windows Server 2003 Windows XP x64 clients x64 Windows XP and WindowsServer 2003 Windows Vista or Vista x64 Windows Vista, XP, or 2000 clients x86 Type 3 - User Mode Windows Vista x64 or XP x64 c...

For Windows XP or XP x64, select Browse for a printer . For Windows Vista or Vista x64, click Select a shared printer by name in the dialog box that appears, then click Next . 5. For Windows XP, XP x64, or 2000, click the icon of the computer or server that is connected to the shared printer, and th...

Note: ❏ The name of the shared printer may be changed by the computer or server that is connectedto the shared printer. To make sure of the name of the shared printer, ask the administratorof the network. ❏ If the printer driver is installed in the client beforehand, you need to select either the ne...

❏ If the additional drivers are installed or the computers of the server and clients use the same OS,you do not have to install the printer drivers from the CD-ROM. 1. Access the shared printer and a prompt may appear. Click OK , then follow the on-screen instructions to install the printer driver f...

The computers on the network can share the printer that is directly connected to one of them. Thecomputer that is directly connected to the printer is the print server, and the other computers arethe clients which need permission to share the printer with the print server. The clients share theprint...

Chapter 6 Replacing Consumable Products Precautions During Replacement Always observe the following handling precautions when replacing consumable products: ❏ Provide enough space for the replacement procedure. You will have to open some parts (suchas the printer cover) of the printer when you are r...

❏ If you move a developer cartridge from a cool to a warm environment, wait for at least onehour before installing it to prevent damage from condensation. w Warning: ❏ Do not touch the toner in developer cartridges. Always keep toner away from your eyes. Iftoner gets on your skin or clothes, wash it...

8. Hold the photoconductor unit’s casing by its handle and insert it into the printer. Slide it gently into the opening until it locks into place. 9. Close the front cover until it clicks shut. Whenever you replace the developer cartridge, you should also clean the paper roller as describedin “Clean...

❏ To get the best print quality, do not store the photoconductor unit in an area subject to directsunlight, dust, salty air, or corrosive gases (such as ammonia). Avoid locations subject toextreme or rapid changes in temperature or humidity. ❏ Do not tilt the photoconductor unit. w Warning: ❏ Do not...

2. Open the front cover by placing your fingers on the grooves on both sides of the cover as shown below, and then pull the cover towards you. c Caution: You must completely open the printer cover when replacing the photoconductor unit;otherwise, you may damage the printer. 3. Hold the photoconducto...

6. Carefully insert the developer cartridge into the new photoconductor unit’s casing until it clicks into place, making sure that the pins on both sides of the developer cartridge are alignedwith the grooves on the casing. 7. Hold the photoconductor unit’s casing by its handle and insert it into th...

Chapter 7 Cleaning and Transporting the Printer Cleaning the Printer The printer needs only minimal cleaning. If you notice a decline in print quality, clean the insideof the printer as described in this section. You should also clean the MP tray and the printer case every few months. c Caution: Do ...

9. Close the output cover. 10. Remove all paper from the MP tray and clean the tray with a clean, dry, lint-free cloth. Cleaning the paper path rollers Paper is sometimes dusted with a powder to keep the image on one sheet from bleeding over to theback of the sheet stacked on top of it. When feeding...

5. Reinstall the developer cartridge and photoconductor unit. 6. Close the printer’s front cover until it clicks shut. Removing spilled toner If toner spills inside the printer, do not use the printer until you remove all the spilled toner. If only a small amount of toner is present, carefully wipe ...

Chapter 8 Troubleshooting Ready and Error Lights (AcuLaser M1200/EPL-6200L) The Ready and Error lights on the top of the printer may be the first indication of trouble. The status of the lights, on, off or flashing, indicates your printer status, as described below. The StatusAlert window in the EPS...

Status/Error/Warning INDICATOR LIGHTS Ready Error “Installed Developer Cartridge is Not a Genuine Epson Product Warning” on page 94 OFF “Sleep mode” on page 95 OFF “Ready” on page 95 OFF “Printing” on page 95 OFF “Processing Data” on page 95 OFF Note: If the problem remains after trying the suggesti...

This is a warning to inform you that the installed developer cartridge is not a genuine Epsonproduct. The use of such products may damage the printer and cause the print quality to decrease.Remove the currently installed cartridge and replace it with a genuine Epson cartridge byfollowing the instruc...

Clearing Jammed Paper When paper is jammed in the printer, the EPSON Status Monitor 3 provides alert messages. Precautions for clearing jammed paper Be sure to observe the following points when you clear jammed paper: ❏ Do not remove jammed paper by force. Torn paper can be difficult to remove and m...

4. Carefully remove the paper from the paper path with both hands. Note: If the paper is difficult to pull out because only a small portion of the paper is visible, see “Paperjam — output cover” on page 100. 5. Reinstall the developer cartridge. 6. Close the printer’s front cover. Printing automatic...

2. Open the printer’s output cover. 3. Carefully remove the paper from the paper path with both hands. 4. Close the output cover. EPSON AcuLaser M1200 Series User’s Guide Troubleshooting 101 Downloaded from ManualsPrinter.com Manuals

2. Gently pull out any sheets that have fed part way into the printer. 3. Close the output tray, and open the printer’s front cover. 4. Remove any pieces of paper that may have torn off or are remaining in the printer, and then close the front cover. Note: If necessary, take out the developer cartri...

The Ready light is on but nothing prints Cause What to do Your computer may not be properly connected to theprinter. Perform the procedure described in the Setup Guide. The interface cable may not be plugged in securely. Check both ends of the cable between the printer andthe computer. Be sure to se...

Graphics don’t print correctly Cause What to do You may need more memory. Graphics require large amounts of memory. Lower thePrint Quality setting in the printer driver. If your printer isthe EPL-6200, you can also install more memory into theprinter for a more permanent solution. There is a page th...

Non-printed side of the page is dirty Cause What to do Toner may have spilled onto the paper feed path. Turn off the printer. Clean internal printer components. White spots, black dots, or black horizontal lines appear in a cyclic manner in the printout Cause What to do There may be a problem with t...

Paper Handling Problems Note: ❏ The EPL-6200 comes with two standard paper sources, i.e., the MP tray and the manual feedslot. The MP tray is the available paper source for the AcuLaser M1200/EPL-6200L. ❏ The optional 500-Sheet Lower Paper Cassette Unit A4 is available only for the EPL-6200. Paper d...

Appendix A Technical Specifications Paper Available paper types This section explains what kind of paper you can use with your printer. Be sure only to use papermentioned in this section. Note: The printer is extremely sensitive to moisture. Be sure to store your paper in a dry environment. General ...

Note: ❏ Since the quality of any particular brand or type of media may be changed by the manufacturerat any time, Epson cannot guarantee the quality of any type of media. Always test samples ofmedia stock before purchasing large quantities or printing large jobs. ❏ You may use paper with preprinted ...

Specifications Since the quality of any particular brand or type of paper may be changed by the manufacturer atany time, Epson cannot guarantee the quality of any paper. Always test samples of paper stockbefore purchasing large quantities or printing large jobs. Paper Types Plain paper, recycled pap...

Printable area EPL-6200 Minimum 4-mm margin on all sides AcuLaser M1200/EPL-6200L Minimum 5-mm margin on all sides Printer General Printing method Laser beam scanning and dry electrophotographic process Resolution EPL-6200: 1200 dpi, Class 1200 dpi, or 600 dpi, 300 dpi AcuLaser M1200/EPL-6200L: 600 ...

Environmental Temperature Operation 10 to 35˚C (50 to 95˚F) Storage 0 to 35˚C (32 to 95˚F) Humidity Operation 15 to 85 % RH Storage 30 to 85 % RH Altitude 2,500 meters (8,200 feet) maximum Standards and approvals Safety standards European model Directive 2006/95/EC EN60950-1 EMC European model Direc...

Electrical Check the label on the back of the printer for the voltage of your printer. AcuLaser M1200/EPL-6200L 110 to 120 V Model 220 to 240 V Model Rated voltage 110 V - 120 V 220 V - 240 V Rated frequency 50 Hz - 60 Hz 50 Hz - 60 Hz Rated current 8.0 A 4.5 A Powerconsumption Duringprinting Averag...

❏ USB 2.0 can be used with Windows Vista, Vista x64, XP, XP x64, and 2000 operating systems. Ethernet interface You can use an IEEE 802.3 100BASE-TX/10 BASE-T straight-through shielded, twisted-pairinterface cable with an RJ45 connector. Note: Ethernet Interface may not be available depending on the...

Appendix B Working with Fonts EPSON BarCode Fonts (Windows only) EPSON BarCode Fonts let you easily create and print many types of bar codes. Normally, bar code creation is a laborious process requiring you to specify various commandcodes, such as Start bar, Stop bar and OCR-B, in addition to the ba...

Bar codeStandard EPSONBarCode OCR-B Check Digit Comments Codabar EPSON Codabar No No Printing of OCR-B and check digits can bespecified with the font name. EPSON CodabarCD No Yes EPSON CodabarCD Num Yes Yes EPSON CodabarNum Yes No System requirements To use EPSON BarCode Fonts, your computer system ...

3. In the dialog box that appears, click Software List . 4. Select the EPSON BarCode Font check box and click Install . Then follow the on-screen instructions. 5. When installation is complete, click OK . EPSON BarCode Fonts are now installed on your computer. Printing with EPSON BarCode Fonts Follo...

3. Select the EPSON BarCode Font you want to use, then set the font size and click OK . Note: In Windows Vista, XP, or 2000, you cannot use font sizes larger than 96 points when printingbar codes. 4. The characters you selected appear as bar code characters similar to those shown below. 5. Select Pr...

Monochrome PrinterDriver Color Printer Driver Host-BasedMonochrome PrinterDriver Zoom Options Not selected Not selected Not selected Graphic mode (in the ExtendedSettings dialog box accessed throughthe Optional Settings tab) High Quality (Printer) (not available) (not available) Printing Mode (in th...

Note: Depending on the print density, or on the quality or color of the paper, bar codes may not bereadable with all bar code readers. Print a sample and make sure the bar code can be read beforeprinting large quantities. BarCode Font specifications This section contains details on the character inp...

Font size 60 pt to150 pt (up to 96 pt in Windows Vista, XP, and 2000).Recommended sizes are 60 pt, 75 pt (standard), 112.5 pt and 150 pt. The following codes are inserted automatically and need not be input by hand: ❏ Left/Right margin ❏ Left/Right guard bar ❏ Center bar ❏ Check digit ❏ OCR-B Print ...

❏ The numeral “0” Print Sample EPSON UPC-E EPSON Code39 ❏ Four Code39 fonts are available, allowing you to enable and disable the automatic insertion ofcheck digits and OCR-B. ❏ The height of the bar code is automatically adjusted to 15% or more of its total length, inconformance to the Code39 stand...

❏ Check digit ❏ Change code set character Print Sample EPSON Code128 EPSON ITF ❏ The EPSON ITF fonts conform to the USS Interleaved 2-of-5 standard (American). ❏ Four EPSON ITF fonts are available, allowing you to enable and disable the automaticinsertion of check digits and OCR-B. ❏ The height of t...

Print Sample EPSON ITF EPSON ITF CD EPSON ITF Num EPSON ITF CD Num EPSON Codabar ❏ Four Codabar fonts are available, allowing you to enable and disable the automatic insertion ofcheck digits and OCR-B. ❏ The height of the bar code is automatically adjusted to 15% or more of its total length, inconfo...

Appendix C Customer Support Contacting Customer Support Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using thetroubleshooting information in your product documentation, contact customer support servicesfor assistance. If customer support fo...

Internet URL http://www.epson.com.au Access the Epson Australia World Wide Web pages. Worth taking your modem here for theoccasional surf! The site provides a download area for drivers, Epson contact points, new productinformation and technical support (e-mail). Epson Helpdesk Epson Helpdesk is prov...

Help for Users in Hong Kong To obtain technical support as well as other after-sales services, users are welcome to contactEpson Hong Kong Limited. Internet Home Page Epson Hong Kong has established a local home page in both Chinese and English on the Internetto provide users with the following info...

Phone: 603-56288288 Fax: 603-56288388/399 Epson Helpdesk ❏ Sales enquiries and product information (Infoline) Phone: 603-56288222 ❏ Enquiries on repair services & warranty, product usage and technical support (Techline) Phone: 603-56288333 Help for Users in India Contacts for information, suppor...

Location Telephone number Fax number Cochin 0484-2357950 0484-2357950 Coimbatore 0422-2380002 NA Pune 020-30286000 /30286001/30286002 020-30286000 Ahmedabad 079-26407176 / 77 079-26407347 Helpline For Service, Product info or to order a cartridge - 18004250011 (9AM - 9PM) - This is a Toll-freenumber...

Index C Canceling printing From the computer (Macintosh)...................................57From the computer (Windows).....................................44 Cleaning Inside printer....................................................................80Paper path rollers................................