Epson 8600- Manuals

iii Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Finding a Place for the Copy Station . . . . . . . . . . . . . . . . . . . . . . . 4 Checking the Copy Station Components . . . . . . . . . . . . . . . . . . . . 5 Setting Up the Cabinet ...

Safety Instructions 1 Safety Instructions Important Safety Instructions Read all of these instructions and save them for later reference. ❏ Follow all warnings and instructions marked on the copy station. ❏ Do not block or cover the openings in the printer or the scanner. ❏ Do not insert objects thr...

4 Finding a Place for the Copy Station Finding a Place for the Copy Station Before assembling the copy station, find a place that meets the following requirements. ❏ Leave adequate room for easy operation, maintenance, and ventilation. The minimum space requirements are shown below. 1348 to 1568 mm ...

Setting Up the Cabinet 7 Setting Up the Cabinet Make sure the cabinet box contains all of the parts listed below. Then follow the steps in this section to assemble the cabinet and to install the control panel. right frame top panel right support left support front panel caster fixer joint A left fra...

8 Setting Up the Cabinet Assembling the Cabinet c Caution: The cabinet is bulky and requires two people for assembly or handling. 1. Place flat washers and spring washers onto four M8 × 35 bolts as shown below. Align the positioning marks on the right support and the right frame, then fasten the sup...

Setting Up the Cabinet 11 7. Attach cable clips to the cabinet as needed. Holes are provided for this purpose in various positions around the cabinet. w Warning: Do not climb onto the cabinet. Doing so may result in injury, or may damage the cabinet. c Caution: This cabinet is designed for use exclu...

14 Setting Up the Scanner Setting Up the Scanner To prepare the scanner for use with the copy station, you need to install the scanner interface board and place the scanner onto the cabinet, as explained below. 1. Unpack and set up the scanner as explained in the scanner’s Setup Guide . 2. Turn the ...

16 Setting Up the Printer 6. Place the scanner onto the cabinet in the direction shown below. Setting Up the Printer To prepare the printer for use with the copy station, you need to install the printer interface board, ROM module, and large capacity paper unit or 500-sheet paper cassette unit, then...

Setting Up the Copy Station 25 Setting Up the Copy Station Once you have added each device to the cabinet, you are ready to set up the copy station. This process involves connecting the interface cables and power cords. Follow the steps in this section. Connecting Interface Cables The copy station d...

Setting Up the Copy Station 27 4. Plug the other end of the cable into the connector on the printer. Plugging in the Printer and Scanner The printer and scanner power is supplied through separate power cords. Take note of the Warnings and Cautions below, then follow the steps in this section to plug...

28 Setting Up the Copy Station c Caution: ❏ Do not unplug a device when its power is on. ❏ When unplugging a power cord, grasp it by the plug—not the cord. Plugging in the printer 1. Check the label on the printer to make sure that the voltage required by the printer matches that of the electrical o...

Setting Up the Copy Station 29 Plugging in the scanner 1. Check the label on the back of the scanner to make sure that the voltage required by the scanner matches that of the electrical outlet it will be plugged into. Also, make sure that you have the correct power cord for your power source. 2. Mak...

30 Testing the Copy Station Testing the Copy Station You can check the operation of the copy station by making a few test copies. You will need to prepare a document to copy and a stack of paper that is the same size as your document, then follow the steps in this section to make your copies. Gettin...

34 Testing the Copy Station Copying Once you have loaded paper and turned on the copy station, you are ready to make test copies. Follow these steps. 1. Make sure the scanner’s READY light is on. 2. Open the document cover. 3. Place your document on the document table, with the side to be scanned fa...

Selecting a Language 37 Selecting a Language The default language for the LCD touch screen is English. However, German, Spanish, French, Italian, Portuguese, and Chinese are also available. If you want to change the language, follow the steps below. 1. Press the Admin button on the control panel. 2....

40 Using Online Reference Guide Using Online Reference Guide System Requirements Your system must meet the following requirements for you to use the online Reference Guide . For Windows Systems: Microsoft ® Windows ® Me/98/95/2000 Microsoft ® Windows NT ® 4.0 CPU: i486/25 MHz (for Windows 95, NT 4.0...

Using Online Reference Guide 41 For Macintosh Display: 640 × 480 pixel or 800 × 600 pixel resolution, with High Color (16 bit) or True Color (32 bit) setting Browser: Web browser Microsoft Internet Explorer 4.0 or later recommended System: System 7.5.1 (System 7.6 or later recommended) Memory: 16 MB...

42 Using Online Reference Guide Viewing online Reference Guide The online Reference Guide allows you to learn more about your copy station. It includes detailed information on making the copy station, from general maintenance and troubleshooting to technical specifications. You can view this guide d...

Using Online Reference Guide 43 For Macintosh 1. Insert the Online Guide CD-ROM in the CD-ROM drive. 2. Double-click the Online Guide folder in the EPSON window. 3. Double-click EPSON AcuLaser Color Copy Station 8600 in the EPSON window. The dialog box appears. 4. To open the Reference Guide, click ...

Color Copy Station Setup Guide Setup Guide 4021300-00EUL Color Copy Station