Envision EN-8500 - Manuals

Envision EN-8500 – Manual in PDF format online.

Manuals:

Manual

Manual Envision EN-8500

Summary

Page 4 - SAFETY PRECAUTIONS

EN-8500 3 z Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. z Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use on...

Page 5 - NOTES; desktop pattern you use.; SPECIAL NOTES ON LCD MONITORS

EN-8500 4 NOTES The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of thefluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. • You may find slightly u...

Page 6 - GENERAL NOTES

EN-8500 5 S • Set your resolution to 1024 x 768 @ 60Hz refresh rate for optimum display quality. • The screen surface is very soft. Do not rub, touch or tap the screen surface with sharp object such as pen or pencil. This contact may scratch or damage the screen. These damages are not covered under ...

Page 7 - BEFORE YOU OPERATE THE MONITOR; FEATURES

EN-8500 6 BEFORE YOU OPERATE THE MONITOR FEATURES • 18” TFT Color LCD Monitor with TV Tuner • Composite & S-Video Inputs • PIP (Picture-in-Picture) • Crisp, Clear Display for W indows • Recommended Resolutions: 1024 X 768 @60Hz • EPA E NERGY S TAR ® • Ergonomic Design • Space Saving, Compact Cas...

Page 8 - The product package should include the following items:; PC Stereo Cable; CHECKING THE CONTENTS OF THE EN-8500 PACKAGE

EN-8500 7 The product package should include the following items: 1. EN-8500 LCD Monitor with TV Tuner 2. Quick Start Guide 3. Remote Control with Batteries 3. Power adaptor & Power Cord 4. Driver Disk Containing W indows 95/98/ME/2000/XP INF & ICM Files 5. PC Stereo Cable 6. D-Sub Cable Mon...

Page 9 - Connect the Power Adapter’s DC cord into your LCD monitor’s power; INSTALLATION INSTRUCTIONS

EN-8500 8 INSTALLATION INSTRUCTIONS POWER CORD Power Source: 1. Make sure the power cord is the correct type that required in your area. 2. This LCD monitor has a universal power supply that allows operation from100 - 240V AC voltage area (No user adjustment is required.) 3. Connect the Power Adapte...

Page 11 - Preparing To Install The Optional Wall Mount Arm (not supplied):

EN-8500 10 Preparing To Install The Optional Wall Mount Arm (not supplied): This monitor can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then dis-connect the cables from the monitor before performing the procedure below. Lay the monitor face down on a soft surf...

Page 16 - MENU; Open OSD menu or select the; Power Indicator; OFF Mode; Power Switch

EN-8500 15 USER CONTROLS (cont) 7. MENU ALL Modes: Open OSD menu or select the highlighted FUNCTION when OSD menu is already active. 8. A-SEL PIP Mode: Audio source select (PIP audio or PC audio) 9. V-SEL ALL Modes: Video source select 10. Power Indicator Green : Power ON AMBER: OFF Mode 11. Power S...

Page 17 - REMOTE CONTROL

EN-8500 16 REMOTE CONTROL OPERATING INSTRUCTIONS (cont)

Page 18 - Press the; Menu; key to call up the OSD. The OSD shown below is from; PC; Use

EN-8500 17 • Press the Menu key to call up the OSD. The OSD shown below is from PC Mode. The detailed adjustment instructions for each mode is described below. PIN CU SHION /P IN BA LA NCE TRA PE ZO ID/ PARA LL ELO GRA M Ma in Men u (1 ) CON TRA ST/BRIG H TNES S TILT SEL E CT: PIN CU SHION /P IN BA ...

Page 19 - SELECT THE DIFFERENT INPUT SOURCE

EN-8500 18 There are seven display modes that you can choose by V-SEL key. PC Mode : Display the video signal from the PC. PC+TV Mode (PIP mode): Display the TV signal in PIP and the background is PC video signal. PC+S-VIDEO Mode (PIP mode): Display the S-VIDEO signal in PIP and the background is PC...

Page 21 - OSD ADJUST menu – Available in ALL modes

EN-8500 20 OSD ADJUST menu – Available in ALL modes Icon Menus and Sub-menus Function Descriptions H.POSITION Adjust the OSD H.POSITION V.POSITION Adjust the OSD V.POSITION OFF TIME Setting the duaration time of OSD menu. RECALL Replace the OSD H./V.POSITION ,OFF TIME with the factory default value....

Page 22 - TV SETUP menu – Available in TV mode

EN-8500 21 TV SETUP menu – Available in TV mode Icon Menus and Sub-menus Function Descriptions CHANNEL ADD/DEL To add/delete the selected TV Channel . CHANNEL SCAN TV Channel Auto Search . FREQUENCY TYPE Select a TV system , cable / antenna Cable : STD IRC(For USA) HRC(For USA) Antenna : air MTS SET...

Page 23 - USING THE RIGHT POWER CORD :; female configuration.; PLUG AND PLAY

EN-8500 22 Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC1/2B(Display Data Channel) capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information abo...

Page 27 - This is a Plug & Play LCD monitor. Turn off the PC then connect the; HOW TO INSTALL INF & ICM FILE

EN-8500 26 FOR FIRST TIME INSTALLATION : This is a Plug & Play LCD monitor. Turn off the PC then connect the cables. Power on the PC and it will automatically detect your new monitor. The W indows Operating system will automatically install a plug & play driver for it. If you would still lik...

Page 28 - APPENDIX; SPECIFICATIONS

EN-8500 27 APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size (18”) Pixel pitch 0.3585mm( H )x 0.3585mm( V ) Viewable angle -80~80 ° (H) –60~70 ° (V) Response time 35 ms(tr+tf) Contrast ratio 350(typ.) Brightness 340(typ.) Video R,G,B Analog Interface Input Separate Sync. H/V TTL H-...

Page 32 - Exit

EN-8500 31 4. Setting up MPAA rating Mode – Select MOVIE GUIDELINES from the V-Chip menu. － Use Up/Down/Left/Right arrow buttons to move around the matrix and press Menu button to change the value from “U” to ‘B” or “B” to “U” － MPAA : Motion Picture Association of America [movie rating organization...