Envision G918w1 - Manual - manualsarea.com

Page 2 - Operation Instructions; FCC RADIO FREQUENCY INTERFERENCE STATEMENT; Reorient or relocate the receiving antenna.; English

Operation Instructions Thank you for purchasing this monitor, a high-resolution multi-scan color monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This monitor has been tested and found compliant with the li...

Page 3 - Content

Content Safety Precautions ............................................................................. 1 First Setup ......................................................................................... 2 Quick Installation..........................................................................

Page 4 - Safety Precautions; Do not place heavy objects on the cable or power cord.

Safety Precautions This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WA...

Page 5 - First Setup; Quick Installation; Installing & Removing the Base

First Setup Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories: Power Cable D-Sub Cable (15 pin) User’s Guide Quick Start Guide Warranty Documents Quick Installation Installing & Removing the Base Install Remove 2 English DVI Cable (...

Page 6 - Connecting the Monitor; Connect Power Cable; Power-ON computer and monitor

Connecting the Monitor 1. Connect Power Cable Connect the power cable to the back of the monitor. Plug the power cable to a nearby power outlet. 2. Connect Analog video cable (D-Sub cable) Make sure both monitor and computer are powered OFF. Connect the video cable ( D-Sub cable) to the computer, th...

Page 7 - Rear View of the Product; Front View of the Product

Rear View of the Product ➐ ➑ ➒ ➐ POWER INPUT ➒ DVI INPUT (DVI 24 PIN) ➑ VGA INPUT (D-SUB 15 PIN) Front View of the Product ➊ ➋ ➌ ➍ ➎ ➏ ➊ OSD TURN ON/OFF ➍ CONFIRM SELECTION ➋ SCROLL DOWN/DECREASE ➎ POWER ON/OFF ➌ SCROLL UP/INCREASE ➏ LED INDICATOR 4 English

Page 8 - or; Main Menu

Using On Screen Display (OSD) Functions Display main menu. 1 Exit from OSD menu. Auto adjust the image when not in main menu. 2 Confirm the selection. Select the desired item when in OSD menu. V or W When not in OSD menu, it is to immediately activate Contrast/ Brightness. It should be change to Con...

Page 9 - Functions OSD; sRGB

Functions OSD Auto Adjust : To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Contrast : To adjust the foreground white level of screen image. V : increase contrast, W : decrease contrast. Brightness : To adjust the luminance of the video. V ...

Page 11 - Supporting Timing Modes

Supporting Timing Modes VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1152 x 8...

Page 12 - Technical Information; Input Signal

Technical Information Technical Specification 9 LCD Panel 19.05” TFT Power Management Energy Star compliant VESA DPMS compatible < 1 W Displayable Resolution WXGA 1440 x 900 max. Vertical Frequency 75Hz max. Pixel Dimension 0.28 x 0.28 mm LCD Display Color 16.2M Tilt 0°~20° Active Display Area 41...

Page 13 - Care and Maintenance; Care; Safety Tips; Power on but no screen image

Care and Maintenance Care Avoid exposing your monitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare. Put your monitor in a well ventilated area. Do not place any heavy objects on top of your monitor. Make certain your monitor is installed in a clean ...

Envision G918w1 - Manual

Table of Contents:

Summary

Other Envision Models