Envision EN-8500 - Manual
Envision EN-8500 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – SAFETY PRECAUTIONS
- Page 5 – NOTES; desktop pattern you use.; SPECIAL NOTES ON LCD MONITORS
- Page 6 – GENERAL NOTES
- Page 7 – BEFORE YOU OPERATE THE MONITOR; FEATURES
- Page 8 – The product package should include the following items:; PC Stereo Cable; CHECKING THE CONTENTS OF THE EN-8500 PACKAGE
- Page 9 – Connect the Power Adapter’s DC cord into your LCD monitor’s power; INSTALLATION INSTRUCTIONS
- Page 11 – Preparing To Install The Optional Wall Mount Arm (not supplied):
- Page 16 – MENU; Open OSD menu or select the; Power Indicator; OFF Mode; Power Switch
- Page 17 – REMOTE CONTROL
- Page 18 – Press the; Menu; key to call up the OSD. The OSD shown below is from; PC; Use
- Page 19 – SELECT THE DIFFERENT INPUT SOURCE
- Page 21 – OSD ADJUST menu – Available in ALL modes
- Page 22 – TV SETUP menu – Available in TV mode
- Page 23 – USING THE RIGHT POWER CORD :; female configuration.; PLUG AND PLAY
- Page 27 – This is a Plug & Play LCD monitor. Turn off the PC then connect the; HOW TO INSTALL INF & ICM FILE
- Page 28 – APPENDIX; SPECIFICATIONS
- Page 32 – Exit
EN-8500
EN-8500
18” LCD Monitor With TV Tuner
User’s
Manual
By Envision Peripherals, Inc.
www.envisionmonitor.com
Before operating your monitor,
please read this manual
thoroughly.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
EN-8500 3 z Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. z Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use on...
EN-8500 4 NOTES The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of thefluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. • You may find slightly u...
EN-8500 5 S • Set your resolution to 1024 x 768 @ 60Hz refresh rate for optimum display quality. • The screen surface is very soft. Do not rub, touch or tap the screen surface with sharp object such as pen or pencil. This contact may scratch or damage the screen. These damages are not covered under ...
