DeLonghi PVC95N - Manuals

11 11 FLUSH INSTALLATION (MODELS WITHOUT METAL TRIM/S ONLY) If you wish to install the hob flush with the work surface, it is neccessary to execute/carry out a miling in the hole of the cut-out as indicated in figs. 1.1b. E 50 mm D A B C Fig. 1.1a E 50 mm D D1 E1 R7 5 A B C Fig. 1.1b STANDARD INSTAL...

12 12 FITTING REQUIREMENTS This cooktop can be built into a working surface from 20 mm thick and 600 mm deep. In order to install the ceramic hob into the kitchen fixture, a hole with the dimensions shown in figures 1.1a and 1.1b has to be made, keeping in consideration the following: • A 20 mm vent...

13 13 FASTENING THE COOKTOP Each cooktop is provided with an installation kit including brackets and screws for fastening the cooktop to benches from 20 mm thick. Before you install the cooktop, make sure that the work surface is square and level, and no structural members interfere with space requi...

14 14 ELECTRICAL SECTION 2 IMPORTANT: Installation must be carried out according to the manufacturer’s instructions. Incorrect installation may cause harm and damage to people, animals or property, for which the manufacturer accepts no responsibility. Before carrying out any work on the electrical s...

15 15 CONNECTION OF THE POWER SUPPLY CABLE Important! This cooktop must be connected to the electricity supply only by an authorised person. To connect the feeder cable to the hob it is necessary to carry out the following operations: • Unhook the terminal board cover “ A ” by inserting a screwdrive...

17 17 • The cooktop is supplied with a power cord already fitted to the appliance and it is suitable for a single-phase type electrical connection (fig. 2.3). • For the two-phase type electrical connection (fig. 2.4): – separate the black and brown wires by removing the metallic terminal; – remove a...

19 19 ELECTRIC DIAGRAM ELECTRIC DIAGRAM KEY TC Touch control board TB Terminal block PE Earth connection LD1 Front-left inner heating element LD1d Front-left outer heating element LD2 Rear-left heating element LD3 Central circular heating element LD3d Central second heating element LD4 Rear-right in...

22 22 Fig. 1.1 FEATURES AND TECHNICAL DATA 1 13 8 11 12 10 7 5 6 3 2 4 1 14 9 Fig. 1.2 1 3 2 4 1 5 10 1 2 3 9 4 5 6 7 8 12 11 13 14

24 24 The ceramic surface of the hob allows a fast transmission of heat in the vertical direction, from the heating elements underneath the ceramic glass to the pans set on it.The heat does not spread in a horizontal direction, so that the glass stays “cool” at only a few centimeters from the cookin...

25 25 Fig. 2.4 Notes: • Each selection (by pressing one of the keys) is indicated by an acoustic signal (beep). Any time the cooktop is connected to the electrical supply or after a power failure, the safety key-lock protection will be automatically activated (indicator light ON above key ). • Befor...

26 26 HOW TO SWITCH ON/OFF THE COOKTOP Switching ON Touch the key until the touch control system is lit (fig. 2.5). The displays of the cooking zones read “ 0 ”. Notes: • If the safety key-lock protection is active, the touch control can be turned ON only after having deactivated this protection. • ...

27 27 FUNCTIONING OF THE DOUBLE COOKING ZONE The double cooking zone consists of two circuits, which may be used in the following modes: • Reduced cooking zone: only the first heating unit is switched ON . • Extended cooking zone: the first and second heating circuits are both switched ON . Turn on ...

28 28 SAFETY KEY-LOCK TO PROTECT CHILDREN This function locks the touch-control keys against unwanted activation. To activate the key-lock press the key ; the indicator light close to the lock symbol will light up. • Cooking zone/s operating (power level already set) - with the key-lock protection a...

30 30 “FAST HEATING” FUNCTION To activate the “Fast Heating” function: • Press the key and keep it pressed until the touch control is lighted. • Select a cooking zone by touching the relevant display of the cooking zone to be used. • Select a setting on the selector (between “ 1 ” and “ 9 ” ): touch...

31 31 1 2 3 4 5 6 7 8 9 10 11 12 Fig. 2.16 After a short period of use, experience will teach you which setting is the right one for your needs. COOKING HINTS Knob setting TYPE OF COOKING 0 Switched OFF 1 2 For melting operations (butter, chocolate). 3 To maintain food hot and to heat small quantiti...

32 32 DISTORTEDPANBASE WRONG DISTORTEDPANBASE WRONG LEVELPANBASE CORRECT WRONG WASTINGPOWER WRONG WASTINGPOWER WRONG WASTINGPOWER CORRECT COMPLETE USEOF THE HEAT DO NOT USE GLASSWARE ON CERAMIC HOBS. DO NOT USE PANS WITH ROUGHT CIRCULAR MACHINED BASE. Fig. 2.17 Fig. 2.18 SAFETY HINTS • Before you sw...

33 33 Power level of Cooking zones Operation time limit 10 hours 5 hours 5 hours 4 hours 3 hours 2 hours 2 hours 2 hours 1 hour 10 minutes OPERATION TIME LIMIT OF COOKING ZONES Each cooking zone is automatically switched OFF after a maximum preset time if no operation is performed.The maximum preset...

34 34 MAXIMUM POWER MANAGEMENT The cooktop maximum power limit (8500 W) can be reduced to a minimum of 2500 W. To change the maximum power limit (only within 30 seconds from the electrical connection): • Connect the appliance to the electrical power supply. • Press at the same time the and keys cont...

35 35 CLEANING AND MAINTENANCE 3 GENERAL ADVICE • Before you begin cleaning, you must ensure that the appliance is switched off and disconnected from the electrical power supply. • It is advisable to clean when the appliance is cold. • Avoid leaving alkaline or acidic substances (lemon juice, vinega...

36 36 CLEANING THE CERAMIC HOB • Remove spillages and other types of incrustations. • Dust or food particles can be removed with a damp cloth. • If you use a detergent, please make sure that it is not abrasive or scouring. Abrasive or scouring powders can damage the glass surface of the hob. • All t...

37 37 SERVICE AND MAINTENANCE Servicing the appliance: Service may be obtained by contacting our Customer Service Centre to locate the nearest Authorised ELBA APPLIANCES Service Agent shared services with Fisher and Paykel Australia PTY LTD (ELBA Appliances AUS, a division of F&P AUS PTY LTD).: ...

w w w . d e l o n g h i c o o k i n g a p p l i a n c e s . c o m . a u C o d . 11 0 6 3 5 2 - ß 0 D e s c r i p t i o n s a n d i l l u s t r a t i o n s i n t h i s b o o k l e t a r e g i v e n a s s i m p l y i n d i c a t i v e .T h e m a n u f a c t u r e r r e s e r v e s t h e r i g h t , c ...