DeLonghi EC885M - Manuals - manualsarea.com

Page 2 - COFFEE MAKER; Instruction for use

Page 4 - Recommended optional accessories; Water hardness filter; PREPARING YOUR MACHINE FOR FIRST USE

3 2 1 Before using the appliance, always read the safety warnings. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. 1. DESCRIPTION 1.1 Description of appliance - A A1. Water tank lidA2. Tank extraction handleA3. Water tankA4. Cup warmerA5. Coffe...

Page 5 - PREPARING YOUR MACHINE FOR FIRST USE

4 2 1 7. The and lights flash to indicate the machine is heating up. When the lights stop flashing and remain on steadily, the machine is ready for rinse. 5. Turn the machine on by pressing the ON/OFF switch (A6). 6. The machine performs a self-diagnosis cycle, indicated by sequential flashing of th...

Page 7 - HOW TO MAKE ESPRESSO COFFEE USING PODS; • When using pods, you can brew 1 cup of coffee

6 2 1 2 1 2 1 2 1 4. HOW TO MAKE ESPRESSO COFFEE USING PODS 1. Place the filter for cof- fee pods (C4) in the portafilter. 2. Insert the pod, centring it as far as possible on the filter. Always follow the instructions on the pod pack to position the pod on the filter correctly. 3. Attach the portaf...

Page 8 - PROGRAMMING THE QUANTITIES OF COFFEE IN THE CUP; Default; MAKING CAPPUCCINO; Tips for best results:

7 5. PROGRAMMING THE QUANTITIES OF COFFEE IN THE CUP The machine is set by default to automatically deliver standard quantities. To change these quantities, proceed as follows: 1. Place one or two cups under the portafilter spouts. 2. Press and hold the button you want to programme ( or ). 3. The co...

Page 9 - MAKING CAPPUCCINO; • You should not deliver steam for more; Cleaning the steam wand

8 MAKING CAPPUCCINO 5. Place the recipient con- taining the milk under the steam wand (A11): immerse the frother and turn the dial to the position. 6. To make the froth, put the nozzle on the surface of the milk and air will catch by the mixing of milk and steam. 7. Keep the steam nozzle just on the...

Page 10 - MEASURING WATER HARDNESS; Total Hardness Test; seconds

9 7. MAKING HOT WATER 1. Place a container under the steam wand. 2. Wait for the coffee lights to come on steadily. 3. Turn the dial to the position. Hot water is delivered from the steam wand. You should not deliver hot water for more than 60 seconds. 1 2 3 8. MEASURING WATER HARDNESS The descaling...

Page 12 - CLEANING THE MACHINE; • While cle; Cleaning the drip tray

11 10. DEFAULT VALUES (RESET) This resets all menu settings and programmed quantities back to the default values. To reset the default values, proceed as follows:1. Position the steam spout over the drip tray;2. Enter the settings menu;3. Turn the steam dial to the position; 4. Press the button. The...

Page 13 - Pod filter; Cleaning the coffee outlet; Do not use solvents or abrasive detergents to clean the cof-; Cleaning the water tank; with fresh water and replace the tank

12 2. Rinse the filters under running water (fig. 7).3. Make sure the holes are not blocked. If necessary, clean with a pin (fig. 5-7). 4. Dry all the components with a cloth.5. Put the perforated filter back in the housing and press as far as it will go (fig. 4). Pod filter Rinse under running wate...

Page 14 - Please note; Orange; Minutes; The descale programme starts and the descaler liquid; up to; close the steam; Delivery stops and the orange

13 + up to MAX level 10 seconds 12. DESCALING 1. Make sure the portafilter is not attached and po-sition a recipient under the hot water spout and coffee outlet 2. Fill the tank with the des- caler solution, obtained by diluting the descaler provided with water (fill the water tank up to the MAX lev...

Page 15 - DESCALING; close the; EXPLANATION OF LIGHTS; Lights

14 Fill up to MAX level Fill up to MAX level DESCALING 7 7. Empty the recipient used to collect the descaler solution and replace it empty. 8. The machine is now ready for rinsing through with clean water. Extract the water tank, empty, rinse under running water, fill with fresh water up to the MAX ...