Canon X-Loupe- Manuals

Page 2 - Please Read the following Safety Precaution before Using X-Loupe!

page26 page27 Handling Precautions Table of contents WARNING! To avoid the fire, electric shock, or severe injury, please obey the following instructions. 1.Keep X-Loupe and its accessories away from children and infants. Contact a doctor if any dangerous situation occurs.2.Do not point X-Loupe dire...

Page 3 - Comparison of the same camera with different names; Before taking pictures of any important subject, please do; Wish you have a wonderful experience on using X-Loupe.; 【Attention】

page28 page29 About Lumos X-Loupe G Series About Lumos X-Loupe G Series Comparison of the same camera with different names IXY IXUS Powershot SD Series 800IS 950IS800IS 950IS700IS 850IS Canon IXUS series camera has different names from country to country, and X-Loupe G Series currently runs well wit...

Page 4 - L C D M o n i t o r

page30 page31 Components Components Release Button of Objective Lens Exchangeable Objective lens Tune Button Switch Button for Lighting Setting (Coaxial Lighting Brightness/Low-Angled Lighting Brightness/Quadrant Setting of Low-Angled Lighting) Light Source of Objective Lens Digital Camera LCD Monit...

Page 5 - Battery Cover; Please go by following steps to charge the battery:; Battery loose from the battery charger?

page32 page33 Components Attention/Warning for the Battery Charging Battery Cover Camera Fixing Screw Tripod/Stand Socket Please go by following steps to charge the battery: Switch Button for Coaxial LightingW: White Light Illumination F: White Light Illumination (Standard) /Functional Illumination ...

Page 6 - Tune Button

page34 page35 Light Source Light Source 2. By default, the coaxial lighting is supported by 8 LEDs. Switching to W+F will turn on all 8 LEDs, while W or F only turns on 4 LEDs. By special order, the coaxial lighting can be equipped with 4 white-light LEDs and 4 Functional Illumination LEDs. There ar...

Page 8 - Attach the objective lens to the module.; s advised to put it back into the carrying case.

page38 page39 Assembling Assembling As picture shown on the left, tuck Canon digital camera into X-Loupe module. Make sure that the left and bottom edges of the Canon digital camera are in close contact with X-Loupe module. Make sure that the screw hole on the bottom of the module is aligned with th...

Page 9 - Put the contact ring on the objective lens before shooting.; Taking pictures for a flat subject

page40 page41 Shooting Strategy Shooting Strategy Put the contact ring on the objective lens before shooting. Taking pictures for a flat subject Taking pictures for a non-flat subject (1) Have the contact ring closely touched the surface of the subject. Slightly press X-Loupe on the subject to reach...

Page 12 - Depth of Focus

page46 page47 Basic Skills for Micro-Photography Canon Digital Camera Basic Setup – Micro-Photography The Manual Mode is required for micro-photography. Please do NOT use Macro or Infinity Shots Mode. Adjust the Zoom to its maximum optical value, 4.0X. (This is the standard setting for X-Loupe.) Set...

Page 15 - For the troubleshooting of IXUS camera, please refer to the Adva

page52 page53 Basic Trouble Shooting Basic Trouble Shooting 1. For the troubleshooting of IXUS camera, please refer to the Adva -nced Camera User Guide of IXUS. 2. The LED in the objective lens is not bright: Check the battery power.Disassemble the objective lens and assemble it back to the module a...