Canon Viewer- Manuals

Page 2 - Notice; the use of this viewer.; Copyrights; Canon and Canon logo are registered trademarks of Canon Inc.; Conventions Used in this Manual; Introduction

i Thank you for purchasing the “Viewer for Pocket PC RV-P1.0” (referred to hereafter as the viewer). Read this manual carefully before you use this viewer to make the best use of it.Make sure to read the Readme file provided on the supplied CD-ROM. The latest product information is available at the ...

Page 3 - ii; Terms and Definitions

ii Terms and Definitions Tap: Operation to touch the liquid crystal screen once with the stylus, a writing toolattached to the Pocket PC terminal. Tap-and-hold: Operation to tap the stylus on an item and hold it for a while. Use this to display amenu. Drag: Operation to tap and move the stylus while...

Page 4 - iii; Contents

iii Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i 1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-1. Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 5 - • Network Camera Server VB101*

1 1.Overview This software is designed to view video distributed from the camera server on the PocketPC terminal through the Internet or LAN. If the VC-C4 or other cameras that can becontrolled from the viewer are connected to the camera server, you can control variouscamera operations such as: pann...

Page 6 - Tap the transferred cabinet file to install the viewer.; Installation is now complete.; Select Settings from the Start menu and tap System.; Uninstallation is now complete.; Installing and Uninstalling the Viewer

2 The viewer requires that ActiveSync be installed on the PC. If it is not installed, be sure toinstall it before installing the viewer. 2-1. Installing the Viewer 1 Start ActiveSync and transfer the cabinet file, Livescope_Pocket2002_ARM_E.cab fromCD-ROM to your Pocket PC. 2 Tap the transferred cab...

Page 7 - Starting and Closing the Viewer; Select Exit from the File menu to close the viewer.

3 3. Starting and Closing the Viewer 3-1. Starting the Viewer 3-1-1. To start up from the viewer Tap the icon of the viewer in the Programs folder to start up the viewer. No connection to the camera server is established when the viewer is started up independently ( Æ P. 4). 3-1-2. To start up from ...

Page 8 - Connecting to the Camera Server; -1. Connecting to the Camera Server by Entering Address Directly; Enter IP address or host name in the address box (; -2. Connecting to the Camera Server Already Registered; Open the address box (

4 4. Connecting to the Camera Server Connection to the camera server can be established in two major methods as follows. 4-1. Connecting to the Camera Server by Entering Address Directly Enter IP address or host name in the address box ( Æ P. 5) directly and tap the Enter key. The video port ( Æ P. ...

Page 11 - The display changes depending on the camera control status.

7 5-2. Operating the Camera 5-2-1. Obtaining Camera Control Privileges Although more than a client can connect to the same camera server, the client who can control the camera is limited to only the client currently holding control privileges. Camera control privileges can be obtained by the followi...

Page 12 - Tap the Backlight Compensation button (; Full Screen Mode

8 5-2-2. Adjusting Pan/Tilt Angle of the Camera First obtain camera control privileges and then tap the point that you want to focus thecamera on the image window ( Æ P. 5, 6). The camera pans and tilts to make that point the center of the image. 5-2-3. Changing Zoom Ratio of the Camera First obtain...

Page 14 - Camera Site; Tap the Add button on Camera Site List.

10 1) To Add a Camera Site 1 Tap the Add button on Camera Site List. 2 Enter each item correctly in the Camera Site List (Add) dialog box and tap the OK button. Site Name: Enter the name of the site that is displayed in Camera Site or the Address box. Address: Enter the IP address or host name of th...

Page 15 - ) To Edit Camera Site Settings; Tap the Edit button on Camera Site List.; ) To Delete Camera Site; Select the site you wish to delete from Camera Site List.

11 2) To Edit Camera Site Settings 1 Tap the Edit button on Camera Site List. 2 Change the settings in the Camera Site List (Edit) dialog box and tap the OK button. 3) To Delete Camera Site 1 Select the site you wish to delete from Camera Site List. 2 Tap the Delete button. 3 Tap the OK button when ...

Page 17 - Camera Position Indicators can be shown or hidden.

13 5-3-4. Displaying Camera Position Camera Position Indicators can be shown or hidden. 5-3-5. Connecting to Network You can establish and cut off dial-up connection to the camera server from the viewer. Toestablish the connection from the viewer, specify dial-up entry for dial-up connection inthe D...

Page 20 - Images are refreshed at a slow rate.

16 z Images are refreshed at a slow rate. • Depending on various conditions such as when the settings of video capture size or quality are specified to a high level at the camera server, or when the network isbusy, refreshing of the images may take time. z Cannot establish a dial-up connection. • Ch...