Canon REALiS X700- Manuals

7 S A FE TY INSTRUC TIONS Safety Instructions Before operating this projector, read this manual thoroughly in order to operate theprojector properly.This projector offers many convenient features and functions. Operating the projectorproperly enables you to manage those features and maintain it in g...

8 S A FE TY INSTRUC TIONS Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. z This projector projects intense light from the projection lens. Do not stare directly intothe lens if possible, as doing so may result in eye damage...

9 S A FE TY INSTRUC TIONS READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate theproduct. Read all of the instructions given here and retain them for later use. Unplug this projectorfrom the AC power supply before clea...

11 S A FE TY INSTRUC TIONS AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirements for use in thecountry you purchased it. THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE. AC Power Cord for the United States and Canada: The AC Po...

12 S A FE TY INSTRUC TIONS Federal Communication Commission Notice Multimedia Projector, Model: SX7/SX6/SX60/X700This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmful interference, and(2) this device must accept ...

13 S A FE TY INSTRUC TIONS Lamp Handling Precautions This projector uses a high-pressure mercury lamp which must be handled carefully andcorrectly as mentioned below. z A lamp may explode with a loud sound or burn out due to a shock, scratch, or usebeyond its expiry date. z The lamp life may differ ...

14 S A FE TY INSTRUC TIONS Installation Precautions Ensure that the projector is installed with a minimum distance of 1 m (3.3') from its left,right, rear, and top panels to the neighboring object such as a wall. Installation Install the projector correctly. Incorrect installation maycause troubles ...

15 S A FE TY INSTRUC TIONS Features of the Multimedia Projector SX7/SX6/SX60/X700 Thank you for purchasing a Canon projector.The MULTIMEDIA PROJECTOR SX7/SX6/SX60/X700 are high-performance projectorswhich project the data from the computer and the moving picture from the DVD player tothe big screen....

16 S A FE TY INSTRUC TIONS Supplied Manuals and Symbols Used in This Manual Supplied Manuals User’s Manual (This Document) This is a universal manual for the projector, SX7/SX6/SX60/X700. This manual providesdetailed information on how to use the projectors. Read this manual thoroughly to make themo...

Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index BEFORE USE

18 BEFORE USE Before Use Supplied Accessories Check whether the following accessories are supplied with the projector. z Remote control z Batteries (type AAA, two)for remote control z Computer connection cable(DVI/Mini D-sub, 15-pin) (1.8m/5.9')[YH7-2052] z Power cord (2m/6.6') z USB cable (1.8m/5.9...

20 BEFORE USE Part Names Main Unit of Projector Front Side Rear Side Infrared Remote Receiver (P27) Ranging Window Lens Lens Cap (P19) Terminals and Connectors Power Cord Connector (P38) Anti-theft Lock Hole An anti-theft wire cable on the market can be connected. Do not place any obstaclebetween th...

21 BEFORE USE Bottom Side Lens Cap Strap Insertion Hole Adjustable Foot (P41) Air Intake Vent Lamp Cover (P119) Rear Adjustable Foot (for fine adjustment) Air Filter (P117) Do not block the air intake. Fail-ure to do so will result in malfunc-tions or fire hazards. Caution Screw Holes for installati...

22 BEFORE USE Buttons on the Remote Control and Top Control Remote Control This projector can be operated using but-tons on the remote control or the top con-trol on the main unit.The remote control allows you to operateall functions of the projector. (1) Infrared Remote Emitter Sends a signal to th...

23 BEFORE USE Top Control (10) POINTER button (P85) Selects the upper, lower, left, or rightitem in the menu. Also moves themouse cursor under the USB connec-tion.On the top control, the [<] and [>]buttons also turn the volume up anddown, respectively (P77). (11) KEYSTONE button (P50, 57) Corr...

24 BEFORE USE Input Terminals on Main Unit SX7/X700 SX6/SX60 (1) (2) (3) (7) (6) (5) (4) (8) (9) (10) (10) (1) (2) (3) (7) (6) (5) (8) (9) (10) (10)

26 BEFORE USE Indicators on the Top Control Top Control (1) POWER indicator (P38, 58, 107) Indicates the projector status.Red: The projector can be turned on. Flashing red: The projector is being turned off (the lamp is beingcooled). Green: The projector is on. Flashing green: The projector is being...

27 BEFORE USE Preparing the Remote Control Installing Remote Control Batteries Remote Control Operating Range Point the remote control to the infraredremote receiver on the front or rear of theprojector whenever pressing any button. z Use the remote control within a distanceof approximately 5 m (16....

30 SETTING UP THE PRO JECTOR Setting Up the Projector Determining the Distance to the Screen The projected image size is determined by the distance between the projector lens and thescreen. Select the place where the desired image size is obtained according to the illustra-tion shown below. H1 and H...

31 SETTING UP THE PRO JECTOR Determining the Installation Position Placing in Front of the Screen Place the projector perpendicular to the screenas far as possible. Placing on a Level Place Place the projector on a level place as far as pos-sible. z A slight error in the projection angle can becorre...

34 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Projecting an Image from the Computer Connecting the Projector to the Computer Connect the projector to the computer. Connecting to Video Terminals Supplied computer connection cable To monitor output terminal(mini D-sub 15-pin terminal) Input Terminal-1(...

35 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER z Before connecting cables, turn off both the projector and computer. z It may project an image inappropriately when projecting the digital PC signal in 1280 x 1024or 1400 x 1050 depending on the type of computer or DVI cable (SX7/SX6/SX60). z The USB ter...

36 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Connecting to an External Monitor You can display an image from the projec-tor to an external monitor. Connecting to AUDIO IN Termi-nals (SX7/X700) Connect an audio cable to the AUDIO IN ter-minal corresponding to the input image sig-nal if you want to us...

38 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Starting Projection Connect the power cord and turn on the projector to start the projection. 1 Connect the power cord. Fully insert the power cord plug into the socket.The [POWER] indicator flashes red. 2 Press the [POWER] button. The [POWER] indicator f...

39 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER The countdown window is displayed for approximately 20 seconds, and then the guid-ing message for the auto setup function appears.Adjust the focus by performing the auto setup or the focus adjustment if you cannotread the message due to out of focus. (P44...

40 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Adjusting the Image Adjusting the Image Size (ZOOM). Adjust the image size in accordance with the screen. 1 Press the [ZOOM] button. The Zoom adjustment window appears. 2 Adjust the image size. 3 Press the [OK] button. z Change the projector installation ...

41 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Adjusting the Projection Angle You can adjust the projection angle with the adjustable foot. 1 Lift the front side of the projector and push the adjusting foot lock button. The adjustable foot extends. 2 Adjust the projection angle while pushing the adjus...

42 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Preparing the Computer Determining the Output Resolution of the Computer To make the most of the display performance of this projector, set output signal resolutionof the computer to an optimum value. Windows Vista 1. Open the [Control Panel] from the sta...

43 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Projecting the Image from the Notebook Computer Most of notebook computers require to turn on the external monitor output to project animage from the projector. To turn on the external monitor output, press the [LCD] or [VGA]function key ([F1] to [F10]) o...

44 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Performing the Auto Setup With the auto setup function, the following set of adjustments is performed automaticallywhen projecting an image from a computer. You can start the projection only with this oper-ation if the input signal has been appropriately ...

45 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER 2 Press the [AUTO SET] button. The Auto setup window appears. 3 Press the [AUTO SET] button again. One or more functions highlighted in black are performed automatically. z You can perform this step by selecting [OK] with the [<] button, and then press...

46 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Selecting an Input Signal You can select an input signal type. Select an input signal from the followings:ANALOG PC-1 : Analog signal Connecting with a DVI/Mini D-sub 15-pin cable (supplied cable) DIGITAL PC : Digital signal Connecting with a DVI digital ...

50 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Adjusting Keystone Distortion The Auto setup function (Auto keystone) automatically adjusts the keystone distortion in alongitudinal direction. Follow the steps below if the function does not adjust the distortionappropriately or you want to adjust the ke...

52 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Setting Up the Computer Screen Automatically (AUTO PC) This projector automatically makes optimum settings for the total number of dots and track-ing depending on a signal type (SXGA+, XGA, etc.).The auto PC adjustment function does not need to be perform...

56 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER „ True size Select this if you want to project a computer screen in its orig-inal size.A clear image can be obtained because of no image pro-cessing. z If the display resolution of the computer is higher than 1400 by 1050 dots (1024 by 768 dotsfor X700), ...

58 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Turning Off the Projector 1 Press the [POWER] button. A confirmation message appears on the screen. To continue projection, wait until the confirmation message disappears (approximately4 seconds) or press a button other than the [POWER] button. 2 Press th...

59 PROJ ECTIN G AN IMAGE FROM TH E COMPUT ER Setting Up the Power Management Function You can use the power management function that turns off the lamp if the projectorreceives no signal input for a while.If you enable the power management mode, the projector displays a countdown timer if theproject...

62 PRO JE CTIN G AN IMAGE FROM A V EQU IPME NT Projecting an Image from AV Equipment Connecting the Projector to an AV Equipment Connect the projector and AV equipment. Connecting to Video Terminals z Before connecting cables, turn off both the projector and AV equipment. z The above illustrations a...

63 PRO JE CTIN G AN IMAGE FROM A V EQU IPME NT SCART cable INPUT Signal: Select [SCART] (P70) AV equipment Projector (SCART terminal) Input Terminal-2 (ANALOG IN-2) LV-CA31 cable Digital cable You can project digital content via the HDMI or DVI terminal. Digital video output terminal INPUT Signal: S...

64 PRO JE CTIN G AN IMAGE FROM A V EQU IPME NT S-VIDEO cable INPUT Signal: [S-VIDEO] is selected automati- cally AV equipment Projector S-VIDEO input terminal(S-VIDEO IN) Commercial S-VIDEO video cable S-VIDEO output terminal(S-VIDEO OUT terminal) SX7/X700 SX6/SX60 INPUT Signal: [VIDEO] is selected ...

67 PRO JE CTIN G AN IMAGE FROM A V EQU IPME NT Projecting a Video Image from an AV Equipment You can project a video image with the steps similar to those for projecting an image from acomputer.This section provides information specific to the projection from an AV equipment. For more detailed infor...

68 PRO JE CTIN G AN IMAGE FROM A V EQU IPME NT Performing the Auto Setup With the auto setup function, a series of screen adjustment and settings, such as Autofocus and Auto keystone is performed automatically when projecting a video image froman AV equipment. You can start the projection only with ...

69 PRO JE CTIN G AN IMAGE FROM A V EQU IPME NT „ Selecting DIGITAL VIDEO 1 Press the [INPUT] button. The [INPUT] window appears. 2 Select the top item in the menu with the [INPUT] button. The selection is toggled through available input signal types from above. 3 If [DIGITAL VIDEO] is unavailable fr...

76 USEFU L FUN CTIO N S AVA ILABLE D U RING A PRESENT AT IO N Useful Functions Available During a Presentation Blackened Out an Image Temporarily X Useful when: X You finished the presentation. X You want to divert attendees' attentionfrom the screen. Blacken out the image temporarily. Blackening ou...

77 USEFU L FUN CTIO N S AVA ILABLE D U RING A PRESENT AT IO N Freezing the Picture X Useful when: X You want to perform a computer opera-tion which is irrelevant to the proceed-ings of the presentation. X You want to stop a moving image. Freeze the moving image. Freezing an Image The "FREEZE"...

78 USEFU L FUN CTIO N S AVA ILABLE D U RING A PRESENT AT IO N Showing the Elapsed Time X Useful when: X You want to manage the proceedings ofthe presentation. The elapsed time from 00:00 to 59:59 isdisplayed at the lower right corner of thescreen. Starting the Countdown Press this button once to dis...

79 USEFU L FUN CTIO N S AVA ILABLE D U RING A PRESENT AT IO N Zooming an Image X Useful when: X Zoom in an object such as a smallgraph during a presentation. X Moving unnecessary information off thescreen to focus on the current subject. Zoom the projected image. Zooming In an Image Press this butto...

81 USEFU L FUN CTIO N S AVA ILABLE D U RING A PRESENT AT IO N Pointing with a Spotlight X Useful when: X You want to point to a portion of an imagethat should draw attendees' attention. Highlight a desired portion of the projectedimage with a spotlight. Showing the Spotlight A spotlight appears at t...

84 SETTING UP FU NCTIO N S FROM MEN U S Setting Up Functions from Menus How to Use Menus Some of the projector's function are used through the menu screen.It consists of following three menus. * The menu items may differ depending on the input signal. The projector stores the settings for each input...

85 SETTING UP FU NCTIO N S FROM MEN U S This section provides the basic operation on the menu. 1 Press the [MENU] button. A menu window appears. 2 Press [<] / [>] to select the appropriate tab. Press [ ] to move the cursor on the tab if it is not on it. 3 Press [ ] / [ ] to select a menu item ...

86 SETTING UP FU NCTIO N S FROM MEN U S 4 Set the menu item. There are four types of menu items that you make a setting: z Directly z From a list z With a slider z In a different screen z Directly Example: Tracking Press [<] [>] to increase/decrease thesetting. z From a list Example: Aspect Pr...

88 SETTING UP FU NCTIO N S FROM MEN U S Setting Display Status Selecting a Screen Mode (1) [Aspect] You can adjust the aspect ratio of the image pro-jected on the screen. T T Press the [MENU] button when you finish. Selecting a Screen Mode (2) [Aspect] You can adjust the aspect ratio of the image pr...

91 SETTING UP FU NCTIO N S FROM MEN U S Setting Display Status Adjusting the Total Number of Dots [Total dots] You can select the total number of dots in thehorizontal direction. Adjust the number of dotswhen the image distorts or noise is displayed onthe screen at both sides. T T T Press the [MENU]...

92 SETTING UP FU NCTIO N S FROM MEN U S Adjusting the Horizontal Position [Horizontal position] You can adjust the horizontal position of thescreen when the projected image is shifted inthe horizontal direction. T T T Press the [MENU] button when you finish. Adjusting the Vertical Position [Vertical...

93 SETTING UP FU NCTIO N S FROM MEN U S Setting Display Status Adjusting the Number of Horizontal Pixels [Horizontal pixels] You can adjust the number of the pixels in thehorizontal direction if the length of the screen istoo long or too short in the horizontal direction. T T T Press the [MENU] butt...

94 SETTING UP FU NCTIO N S FROM MEN U S Performing Progressive Processing [Progressive] You can accumulate and composite informationfor a signal for a low resolution image to convertit to a high resolution image. T T Press the [OK] button to confirm, and then pressthe [MENU] button. Selecting a Menu...

96 SETTING UP FU NCTIO N S FROM MEN U S Correcting the Screen Color [Screen color] You can adjust the while balance so that whiteportions of the image are displayed correctly. T T Press the [OK] button to confirm, and then pressthe [MENU] button. Capturing a Logo to Be Projected [Logo capture] You c...

97 SETTING UP FU NCTIO N S FROM MEN U S Setting Display Status Selecting a Logo Display Position [Logo position] You can select a logo display position. You canplace the logo at the center or a corner of thescreen. T T T Press the [MENU] button when you finish. Displaying a Logo (No signal screen) [...

98 SETTING UP FU NCTIO N S FROM MEN U S Displaying a Logo (NO SHOW) [NO SHOW] You can display a logo on a screen when theprojected image is blackened out temporarily bypressing the [NO SHOW] button. T T T Press the [OK] button to confirm, and then pressthe [MENU] button. Selecting a Logo at Startup ...

99 SETTING UP FU NCTIO N S FROM MEN U S Setting Display Status Selecting Aspect Ratio of the Screen [Screen aspect] You can select the aspect ratio of the projectingscreen. T T Press the [MENU] button when you finish. Display settings Screen aspect Select this when you use a screenwith aspect ratio ...

100 SETTING UP FU NCTIO N S FROM MEN U S Setting the Image Quality Selecting an Image Mode [Image mode] You can select an image mode suitable for theprojecting image. T T Press the [OK] button to confirm, and then pressthe [MENU] button. Image adjustment Image mode Select this to project an image wi...

101 SETTING UP FU NCTIO N S FROM MEN U S Setting the Image Quality Adjusting the Brightness [Brightness] You can adjust the brightness of an image whenit is too bright or dark. T T Press the [MENU] button when you finish. Adjusting the Contrast [Contrast] You can adjust the contrast of an image if y...

102 SETTING UP FU NCTIO N S FROM MEN U S Adjusting the Sharpness [Sharpness] You can adjust the sharpness when you want tomake an image sharper or softer. T T Press the [MENU] button when you finish. Making a Gamma Correction [Gamma] You can make a gamma correction if light ordark portions of an ima...

105 SETTING UP FU NCTIO N S FROM MEN U S Setting the Image Quality Making Advanced Color Adjustment (3) [6-axis color adjust] You can make fine color adjustment with the 6-axis color adjustment box (RGB (red/green/blue)and CMY (cyan/ magenta/yellow)).Refer to Glossary for information on the 6-axisco...

106 SETTING UP FU NCTIO N S FROM MEN U S Resetting the Image Settings [Reset] You can reset the current image settings to thedefault settings if you want to make all imagesettings all over again. T T Press the [OK] button to confirm, and then pressthe [MENU] button. Image adjustment Reset Resets the...

107 SETTING UP FU NCTIO N S FROM MEN U S Setting Various Function Setting Auto Setup Function [Auto setup] You can select an item you want to enable in theauto setup function. T T Select [On] or [Off] for the following items if youwant to enable or disable them in the auto setupfunction, respectivel...

108 SETTING UP FU NCTIO N S FROM MEN U S Skip the POWER Button Operation [Direct power on] You can set the projector to be turned on whenyou connect the power cord. T T Press the [OK] button to confirm, and then pressthe [MENU] button. Enabling/Disabling the Beep [Beep] You can enable/disable the be...

109 SETTING UP FU NCTIO N S FROM MEN U S Setting Various Function Selecting a Display Language [Language] You can select a language to be used in themenu from 20 different languages. T T Press the [OK] button and all words in the menuwill be displayed in the selected language.Press the [MENU] button...

110 SETTING UP FU NCTIO N S FROM MEN U S Prohibiting the Projector Operation [Key lock] You can prohibit the use of the buttons on thetop control or remote control to prevent themfrom being pressed by mistake. T T Press the [OK] button to confirm, and then pressthe [MENU] button. Enabling/Disabling ...

111 SETTING UP FU NCTIO N S FROM MEN U S Setting Various Function Turning On/Off the LED Illumination [LED illumination] You can turn on/off the LED illumination lampand the LEDs on the terminals (P24, 25, 26). T T Press the [OK] button to confirm, and then pressthe [MENU] button. Setting up the Rem...

112 SETTING UP FU NCTIO N S FROM MEN U S Setting up the Digital Video Input Signal [Digital video] You can select the standard of the digital videoinput signal. T T T Press the [OK] button to confirm, and then pressthe [MENU] button. Setting a Password [Password settings] You can set a password to t...

113 SETTING UP FU NCTIO N S FROM MEN U S Setting Various Function Registering a Password [Register password] You can register a password that you need toenter when turning on the projector. T T T Press the [OK] button to display the passwordentry screen. Enter a 4-digit password from the left. You c...

114 SETTING UP FU NCTIO N S FROM MEN U S Resetting the Lamp Counter [Lamp counter] You can reset the lamp counter that indicates thetiming to replace the projector when you replaceit. T T T z If the time of use is 1,400 hours1,800 hours for SX7/X7002,300 hours for SX60 z If the time of use is 1,400 ...

Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index MAINTENANCE

116 MAINT ENANCE Maintenance Cleaning the Projector Clean the projector frequently to prevent dust from settling on the surface.A dirty lens may ruin the quality of the projected image. Wipe the projector's main unit softly with a soft cloth.If the projector is heavily soiled, soak the cloth in wate...

117 MAINT ENANCE Cleaning and Replacing the Air Filter An air filter is installed in the air intake vent on the bottom of the main body to protect theinternal lens and mirror from dust. Should the air filter become clogged with dust, the pro-jector may be damaged since it will block the air flow int...

118 MAINT ENANCE Replacing the Lamp When the time of use of the lamp exceeds 1,400 hours (1,800 hours or longer for SX7/X700, 2,300 hours or longer for SX60), the following message (two types) is displayed for10 seconds each time the projector is turned on. z When the time of use is 1,400 to 1,500 h...

119 MAINT ENANCE Replacing the Lamp 1 Turn off the projector, disconnect the power plug from the AC outlet, and then let the pro-jector stand for at least 1 hour. 2 Loosen a screw with a flathead screwdriver and remove the lamp cover. 3 Loosen two screws, pull up the handle, and then remove the lamp...

122 TROU BLESHOOT ING Troubleshooting WARNING Lamp Flash Patterns The WARNING lamp on the Control Panel flashes in red when there is a trouble in the pro-jector. z Turn off the projector, wait until the cooling fan stops, and remove the power plug from theAC outlet before dealing with the trouble. F...

123 TROU BLESHOOT ING Symptoms and Solutions You cannot turn on the projector. You cannot project an image from the projector. Cause Countermeasure The power cord is not connectedcorrectly. Check whether the power cord is connected correctly (P38). The power cord has just been con-nected. You cannot...

124 TROU BLESHOOT ING You cannot hear sound. The projected image is blur. You cannot project an image appropriately. Cause Countermeasure The audio cable is not connectedcorrectly. Check the cable connection of the audio cable (P36). The [MUTE] function is enabled. Press the [MUTE] button on the rem...

125 TROU BLESHOOT ING You cannot project an image from a notebook computer. The projector is forced to be turned off. Cause Countermeasure The connection cable is not con-nected correctly. Check whether the connection cable is connected to thevideo terminal of the computer correctly (P34, 35). The v...

126 TROU BLESHOOT ING You cannot operate the remote control. You cannot use the wireless mouse function. Cause Countermeasure Batteries are not installed properlyor they have run out. Check whether batteries are installed correctly. If batteries areinstalled correctly, replace them with new batterie...

Table of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index APPENDIX Table of contents...

128 APPENDI X Appendix Supported Computer Signal Types This projector supports following signal types.If your computer or AV equipment is compatible with any one of these signal types, the pro-jector's auto PC function select the input signal type to project an image appropriately. ANALOG PC DIGITAL...

129 APPENDI X Relationship between Screen Size and Projecting Distance Screen size at 4:3 aspect ratio Type – W x D (cm) Projecting distance at (m) H1 (cm) H2 (cm) Screen size at 16:9 aspect ratio Type – W x D (cm) Max. zooming Min. zooming 40" 81 x 61 1.2 (3.9') 2.0 (6.6') 55 (1.8') 6 (0.2') 37...

130 APPENDI X Glossary 6-axis color adjust (P105) The color adjustment function for anadvanced user. You can adjust color balanceand color level for 6 axis of RGB (red/green/blue) and CMY (cyan/magenta/yellow) of theprojected image to make a fine color adjust-ment. You can perform the 6-axis colorad...

134 APPENDI X Specifications Projector * 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the charac-teristics of the LCD panel. * Using the projector continuously for an extended period of time may accelerate the deteriora...

135 APPENDI X External View Input terminal-2 (ANALOG IN-2) (Analog PC-2 input/component input terminal) This terminal is used as a computer analog PC input or component input terminal. Use a D-sub computer cable for connection. Mini D-sub 15-pin 1 R 9 +5 V power 2 G 10 Ground (Vertical sync.) 3 B 11...

136 INDE X Index Numerics 6-axis color adjust ........................ 105, 130 A Adjusting keystone distortion ................. 50AdobeRGB ............................. 53, 100, 130Air filter ................................................. 117ANALOG IN-1 .................................. 24, 34...

138 Options * This part is used to hang the projector from a ceiling.** This part is used to join the ceiling pipe with the ceiling mounting bracket.For more detailed information, refer to the instruction manual that comes with the ceiling mountingbracket RS-CL06. z Lamp Part No.SX7/X700: RS-LP04SX6...

140 Menu Configuration The Display settings menu * : Factory defaults (settings after reset) Aspect DIGITAL PC/ANALOG PC P88 Full screen *4:3AutoWideTrue size VIDEO/S-VIDEO/SCART P89 Full screen *4:3Wide DIGITAL VIDEO/COMPO-NENT P88 Auto *Full screen4:3Wide Input signal select ANALOG PC P89 640 x 48...