Canon REALiS X600- Manuals

Page 22 - REMOTE

User Command Specifications 9. Details of command REMOTE 1 REMOTE REMOTE REMOTE None "i:OK" is returned when it was possible to switch the mode properly. This switches to Remote mode. -1 -2 However, zoom or focus lens drive stops if the zoom or focus lens is being driven. -3 -4 -5 When this ...

Page 23 - LOCAL

User Command Specifications 9. Details of command LOCAL 1 LOCAL LOCAL LOCAL None "i:OK" is returned when it was possible to switch the mode properly. This switches to Local mode. -1 RC -2 However, zoom or focus lens drive stops if the zoom or focus lens is being driven. -3-4 Mode switching &...

Page 24 - POWER

User Command Specifications 9. Details of command POWER 1 POWER POWER POWER □ <Parameter ：ＩＤ > "i:OK" is returned if the parameter was set properly. This performs ON/OFF control of the power supply. -1-2 However, zoom or focus lens drive stops if the zoom or focus lens is being driven....

Page 25 - AUTOSETEXE

User Command Specifications 9.Details of command AUTOＳＥＴEXE 1 AUTOＳＥＴEXE AUTOＳＥＴEXE AUTOSETEXE□<Auto set parameter：ＩＤ> Auto set parameters For details, refer to the RANGE command . “i:OK” is returned when the automatic processing was completed successfully.One of the following responses is ret...

Page 26 - BLANK

User Command Specifications ９．Details of command BLANK 1 BLANK BLANK BLANK=<BLANK parameter：ＩＤ> BLANK parameters For details, refer to the RANGE command . For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus lens is bei...

Page 27 - INPUT

User Command Specifications 9. Details of command INPUT 1 INPUT INPUT INPUT=<Input selection parameters ：ＩＤ > Input selection parameters "i:OK" is returned if the parameter was set properly. -1 A "busy" response is given while the zoom or focus lens is being driven. -2 This com...

Page 28 - AUTOPC

User Command Specifications 9. Details of command AUTOPC 1 AUTOPC AUTOPC AUTOPC None -1 A "busy" response is given while the zoom or focus lens is being driven. Furthermore, it may not be possible to execute the command with some input signals. -2-3 ・ Total number of dots ・ Tracking ・ Horizo...

Page 29 - DOTS

User Command Specifications 9. Details of command DOTS 1 DOTS DOTS DOTS=<Number of dots: Number> Number of dots 1 This designates the total number of dots for one horizontal period. -1 A "busy" response is given while the zoom or focus lens is being driven. Furthermore, it may not be p...

Page 30 - TRACK

User Command Specifications 9. Details of command TRACK 1 TRACK TRACK TRACK=<Adjustment value: Number> Adjustment value -1 A "busy" response is given while the zoom or focus lens is being driven. Furthermore, it may not be possible to execute the command with some input signals. -2 Men...

Page 33 - SEL

User Command Specifications 9. Details of command SEL 1 SEL SEL SEL=<Input signal selection parameter: ID> Input signal selection parameter Auto This selects the input signal. -1 A "busy" response is given while the zoom or focus lens is being driven. Furthermore, it may not be possibl...

Page 34 - ASPECT

User Command Specifications 9. Details of command ASPECT 1 ASPECT ASPECT ASPECT=<Screen setting parameters ：ＩＤ > Screen setting parameters AutoNormalWideFull screenReal -1 A "busy" response is given while the zoom or focus lens is being driven. Furthermore, it may not be possible to ex...

Page 35 - IMAGE

User Command Specifications 9. Details of command IMAGE 2 IMAGE IMAGE IMAGE=<Image mode setting parameter ：ＩＤ > Image mode setting parameters This sets the image quality. -1 A "busy" response is given while the zoom or focus lens is being driven. -2-3 Menu[Image adjustments] - [Image m...

Page 37 - BRI

User Command Specifications 9. Details of command BRI 1 BRI BRI BRI=<Brightness setting: Number> Brightness setting (-20 to 20) This sets the screen brightness. -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[Image adjustments] - [Brightness] [Image ...

Page 38 - CONT

User Command Specifications 9. Details of command CONT 1 CONT CONT CONT=<Contrast setting: Number> Contrast setting (-20 to 20) This sets the screen contrast. -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[Image adjustments] - [Contrast] [Image adju...

Page 39 - SHARP

User Command Specifications 9. Details of command SHARP 1 SHARP SHARP SHARP=<Sharpness setting: Number> Sharpness setting (-4 to 4) -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[Image adjustments] - [Sharpness] [Image adjustments] - [Sharpness] -3-...

Page 40 - GAMMA

User Command Specifications 9. Details of command GAMMA 1 GAMMA GAMMA GAMMA=<Gamma adjustment: Number> Gamma adjustment (-4 to 4) This performs the Gamma adjustment. -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[Image adjustments] - [Gamma] [Image ...

Page 41 - DGAMMA

User Command Specifications 9. Details of command DGAMMA 1 DGAMMA DGAMMA DGAMMA=<Dynamic gamma setting parameter ：ＩＤ > Dynamic gamma setting parameters The command is used to set the dynamic gamma function to ON or OFF. -1 A "busy" response is given while the zoom or focus lens is bein...

Page 42 - PROG

User Command Specifications 9. Details of command PROG 2 PROG PROG PROG=<Progressive conversion setting parameters ：ＩＤ > Progressive conversion setting parameters This command is used to set the progressive conversion processing to ON or OFF. -1 A "busy" response is given while the zoo...

Page 44 - WB

User Command Specifications 9. Details of command WB 1 WB WB WB=<Screen color correction parameters ：ＩＤ > Screen color correction parameters MeaningStandardBlackboardAdjust -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[Image adjustments] - [Screen ...

Page 45 - WBRGB

User Command Specifications 9. Details of command WBRGB 1 WBRGB WBRGB RGB setting value (Each value –20 to 20) This sets the RGB adjustment values of the screen color correction. -1 A "busy" response is given while the zoom or focus lens is being driven. -2 -3 Menu[Image adjustments] - [Scre...

Page 46 - SAT

User Command Specifications 9. Details of command SAT 1 SAT SAT SAT=<Color saturation value setting: Number> Saturation setting (-20 to 20) This sets the screen color saturation. -1 A "busy" response is given while the zoom or focus lens is being driven. Furthermore, it may not be poss...

Page 47 - HUE

User Command Specifications 9. Details of command HUE 1 HUE HUE HUE=<Hue setting value ： Number> Hue setting (-20 to 20) This sets the screen hue. -1 A "busy" response is given while the zoom or focus lens is being driven. Furthermore, it may not be possible to execute the command with...

Page 48 - RGBGAIN

User Command Specifications ９．Details of command RGBGAIN 1 RGBGAIN RGBGAIN RGBGAIN=<R gain setting：Number>▽<G gain setting：Number>▽<B gain setting：Number> RGB gain settings (from -20 to 20 for each value) The RANGE command can be used to obtain the parameter range that can be set a...

Page 49 - RGBOFFSET

User Command Specifications ９．Details of command RGBOFFSET 1 RGBOFFSET RGBOFFSET RGB offset settings (-20 to 20 for each value) The RANGE command can be used to obtain the parameter range that can be set at that time.For details, refer to the RANGE command . For all other responses, refer to "Er...

Page 50 - ACADJUST

User Command Specifications 9. Details of command ACADJUST 1 ACADJUST ACADJUST ACADJUST=<Advanced color adjustment parameter ：ＩＤ > Advanced color adjustment parameters Low memory color adjustmentMedium memory color adjustmentHigh memory color adjustment -1 A "busy" response is given wh...

Page 51 - MEMCADJ

User Command Specifications ９．Details of command MEMCADJ 1 MEMCADJ MEMCADJ MEMCADJ=<Memory color adjustment parameter：ＩＤ> Memory color adjustment parameters For details, refer to the RANGE command . For all other responses, refer to "Error List." (1) However, a "busy" response ...

Page 54 - LAMP

User Command Specifications 9. Details of command LAMP 1 LAMP LAMP LAMP=<Lamp output setting parameters ：ＩＤ > Lamp output setting parameters -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[Image adjustments] - [Lamp mode] [Image adjustments] - [Lamp ...

Page 55 - RESET

User Command Specifications 9. Details of command RESET 1 RESET RESET RESET □ <Reset parameters ：ＩＤ > Reset parameters This resets the projector settings. -1 A "busy" response is given while the zoom or focus lens is being driven. -2 What can be specified by the reset parameters for ea...

Page 57 - AVOL

User Command Specifications 9. Details of command AVOL 1 AVOL AVOL AVOL=<Audio volume level: Number> Audio volume level (0 to 20) -1 A "busy" response is given while the zoom or focus lens is being driven. -2-3 Button 'VOL+' and 'VOL-' on the remote control 'VOL' on the remote control ...

Page 58 - MUTE

User Command Specifications 9. Details of command MUTE 1 MUTE MUTE MUTE=<Mute control parameter: ID> Mute control parameter -1 A "busy" response is given while the zoom or focus lens is being driven. -2-3-4-5 Setting > MUTE=ON This mutes the volume. < i:OK Reference > GET MUTE...

Page 59 - BVOL

User Command Specifications 9. Details of command BVOL 1 BVOL BVOL BVOL=<Beep sound setting: Number> Beep sound setting -1 A "busy" response is given while the zoom or focus lens is being driven. -2-3 -4 Setting > BVOL=0 This mutes the BEEP sound. < i:OK Reference > GET BVOL o...

Page 60 - IMAGEFLIP

User Command Specifications 9. Details of command IMAGEFLIP 1 IMAGEFLIP IMAGEFLIP IMAGEFLIP=<Image flip setting parameters ：ＩＤ > Image flip setting parameters Flip horizontallyFlip verticallyFlip horizontally and vertically -1 A "busy" response is given while the zoom or focus lens is ...

Page 61 - PMM

User Command Specifications 9. Details of command PMM 1 PMM PMM PMM=<Power management setting parameters ：ＩＤ > Power management setting parameters -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[System settings] - [Power management modes] [System set...

Page 62 - PJON

User Command Specifications 9. Details of command PJON 1 PJON PJON PJON=<Parameters for setting display screen at startup; ＩＤ > Parameters for setting display screen at startup -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[Display settings] - [User...

Page 63 - NOSIG

User Command Specifications 9. Details of command NOSIG 1 NOSIG NOSIG NOSIG=<Parameters for setting display screen in no-signal mode ：ＩＤ > Parameters for setting display screen in no-signal mode -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[Display...

Page 64 - NOSHOW

User Command Specifications 9. Details of command NOSHOW 1 NOSHOW NOSHOW NOSHOW=<Parameters for setting display screen in no show status ：ＩＤ > Parameters for setting display screen in no show status -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[Dis...

Page 65 - LOGOPOS

User Command Specifications 9. Details of command LOGOPOS 1 LOGOPOS LOGOPOS LOGOPOS=<User image position setting parameters ：ＩＤ > User image position setting parameters This sets the logo display position. -1 A "busy" response is given while the zoom or focus lens is being driven. -2 M...

Page 66 - LANG

User Command Specifications 9 . Details of command LANG 1 LANG LANG LANG=<Language selection parameters ：ＩＤ > Language selection parameters -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[System settings] - [Languages] [System settings] - [Languages]...

Page 67 - TERMINAL

User Command Specifications 9. Details of command TERMINAL 1 TERMINAL TERMINAL TERMINAL=<Terminal setting parameters ：ＩＤ > Terminal setting parameters -1 -2-3-4 Setting > TERMINAL=IN This sets to input < i:OK Reference > GET TERMINAL or ?TERMINAL This retrieves the terminal setting st...

Page 68 - KEYLOCK

User Command Specifications 9. Details of command KEYLOCK 1 KEYLOCK KEYLOCK KEYLOCK=<Key lock setting parameters ：ＩＤ > Key lock setting parameters -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[System settings] - [Key lock] [System settings] - [Key ...

Page 69 - RCCH

User Command Specifications 9. Details of command RCCH 1 RCCH RCCH RCCH=<Remote control setting parameters ：ＩＤ > Remote control setting parameters -1 A "busy" response is given while the zoom or focus lens is being driven. -2 Menu[System settings] - [Remote control] [System settings] -...

Page 70 - GUIDE

User Command Specifications 9. Details of command GUID 1 GUIDE GUIDE GUIDE=<Guide setting parameter：ＩＤ> Guide setting parameters For details, refer to the RANGE command . For all other responses, refer to "Error List." This command is used to set the guide function display to ON or OFF...

Page 71 - DPON

User Command Specifications 9. Details of command DPON 1 DPON DPON DPON=<Direct power-on setting parameter：ＩＤ> Direct power-on setting parameters For details, refer to the RANGE command . For all other responses, refer to "Error List." This command is used to set direct power-on functi...

Page 72 - LEDILLUMINATE

User Command Specifications ９．Details of command LEDILLUMINATE 1 LEDILLUMINATE LEDILLUMINATE LEDILLUMINATE=<LED lighting control setting parameter：ＩＤ> LED lighting control setting parameters For details, refer to the RANGE command . For all other responses, refer to "Error List." This ...

Page 73 - ZSTEPDRV

User Command Specifications ９．Details of command ZSTEPDRV 1 ZSTEPDRV ZSTEPDRV ZSTEPDRV=<Zoom lens step control parameter：ＩＤ> Zoom lens step control parameters For details, refer to the RANGE command . For all other responses, refer to "Error List." This command is used to initiate the ...

Page 74 - ZCONTDRV

User Command Specifications ９．Details of command ZCONTDRV 1 ZCONTDRV ZCONTDRV ZCONTDRV=<Zoom lens continuous control parameter：ＩＤ> Zoom lens continuous control parameters For details, refer to the RANGE command . For all other responses, refer to "Error List." This command is used to d...

Page 75 - FSTEPDRV

User Command Specifications ９．Details of command FSTEPDRV 1 FSTEPDRV FSTEPDRV FSTEPDRV=<Focus lens step control parameter：ＩＤ> Focus lens step control parameters For details, refer to the RANGE command . For all other responses, refer to "Error List." This command is used to drive the f...

Page 76 - FCONTDRV

User Command Specifications ９．Details of command FCONTDRV 1 FCONTDRV FCONTDRV FCONTDRV=<Focus lens continuous control parameter：ＩＤ> Focus lens continuous control parameters For details, refer to the RANGE command . For all other responses, refer to "Error List." This command is used to...

Page 77 - RC

User Command Specifications 9. Details of command RC 2 RC RC RC □ <Remote control emulation button parameters ：ＩＤ > Remote control emulation button parameters The key assignment for the remote control emulation buttons is as follows. *Use the application to adjust the time between pressing of ...

Page 79 - MAIN

User Command Specifications 9. Details of command MAIN 1 ＭＡＩＮＭＡＩＮ MAIN □ <Main unit panel emulation button parameters ：ＩＤ > Main unit panel emulation button parameters The key assignments for the front panel buttons are shown below. *Use the application to adjust the time between pressing of ...

Page 81 - GET MODE

User Command Specifications 9 ． Details of command GET MODE 1 GET MODE GET MODE This inquires about the current control mode. -1-2-3 a. b. > GET MODE or ?MODE< g:MODE=REMOTE * Commands are indicated by ">", and responses are indicated by "<". Supported Command States OFF ...

Page 82 - GET POWER

User Command Specifications ９．Details of command GET POWER 1 GET POWER GET POWER GET □ POWER ? △ POWER g:POWER=<Power status: ID> OFFOFF2ONONON2PMM Transitioning from power on → standby mode PMMPMM2ON Transitioning from standby → power on ON2OFF For all other responses, refer to "Error Lis...

Page 83 - GET BLANK

User Command Specifications ９．Details of command GET BLANK 1 GET BLANK GET BLANK For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command and FCONTDRV command. ） (2) The BLANK...

Page 84 - GET INPUT

User Command Specifications 9 ． Details of command GET INPUT 1 GET INPUT GET INPUT GET □ INPUT ? △ INPUT g:INPUT=<Input type: ID> For all other responses, refer to "Error List." -1 This inquiry can be made in the power-on status. A "busy" response is given while the zoom or foc...

Page 85 - GET DOTS

User Command Specifications 9 ． Details of command GET DOTS 1 GET DOTS GET DOTS GET □ DOTS ? △ DOTS g:DOTS=<Total number of dots: Number> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the Z...

Page 86 - GET TRACK

User Command Specifications 9 ． Details of command GET TRACK 1 GET TRACK GET TRACK GET □ TRACK ? △ TRACK g:TRACK=<Tracking adjustment value: Number> -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command and FCONTDRV command. ） With ...

Page 89 - GET SEL

User Command Specifications 9 ． Details of command GET SEL 1 GET SEL GET SEL GET □ SEL ? △ SEL g:SEL=<Input signal: ID> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command an...

Page 90 - GET ASPECT

User Command Specifications 9 ． Details of command GET ASPECT 1 GET ASPECT GET ASPECT GET □ ASPECT ? △ ASPECT g:ASPECT=<Screen setting ：ＩＤ > AutoNormalWideFull screenReal For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens ...

Page 91 - GET IMAGE

User Command Specifications 9 ． Details of command GET IMAGE 1 GET IMAGE GET IMAGE GET □ IMAGE ? △ IMAGE g:IMAGE=<Image mode ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV...

Page 92 - GET BRI

User Command Specifications 9 ． Details of command GET BRI 1 GET BRI GET BRI GET □ BRI ? △ BRI g:BRI=<Brightness ： Number> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command...

Page 93 - GET CONT

User Command Specifications 9 ． Details of command GET CONT 1 GET CONT GET CONT GET □ CONT ? △ CONT g:CONT=<Contrast value: Number> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDR...

Page 94 - GET SHARP

User Command Specifications ９．Details of command GET SHARP 1 GET SHARP GET SHARP GET □ SHARP ? △ SHARP g;SHARP=<Sharpness setting: Number> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ...

Page 95 - GET GAMMA

User Command Specifications 9 ． Details of command GET GAMMA 1 GET GAMMA GET GAMMA GET □ GAMMA ? △ GAMMA g:GAMMA=<Gamma adjustment value ： Number> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer...

Page 96 - GET DGAMMA

User Command Specifications 9 ． Details of command GET DGAMMA 1 GET DGAMMA GET DGAMMA GET □ DGAMMA ? △ DGAMMA g:DGAMMA=<Setting: ID> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTD...

Page 97 - GET PROG

User Command Specifications 9 ． Details of command GET PROG 1 GET PROG GET PROG GET □ PROG ? △ PROG g:PROG=<Set (status) value: ID> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDR...

Page 98 - GET WB

User Command Specifications 9 ． Details of command GET WB 1 GET WB GET WB GET □ WB ? △ WB g:WB=<Screen color correction value: ID> Meaning NormalBlackboard ADJUST Adjust For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens i...

Page 99 - GET WBRGB

User Command Specifications 9 ． Details of command GET WBRGB 1 GET WBRGB GET WBRGB GET □ WBRGB ? △ WBRGB For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command and FCONTDRV command. ）...

Page 100 - GET SAT

User Command Specifications 9 ． Details of command GET SAT 1 GET SAT GET SAT GET □ SAT ? △ SAT g:SAT=<Color saturation value setting: Number> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to t...

Page 101 - GET HUE

User Command Specifications 9 ． Details of command GET HUE 1 GET HUE GET HUE GET □ HUE ? △ HUE g:HUE=<Hue value setting ： Number> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （Refer to the ZCONTDRV c...

Page 102 - GET RGBGAIN

User Command Specifications ９．Details of command GET RGBGAIN 1 GET RGBGAIN GET RGBGAIN GET□RGBGAIN?△RGBGAIN For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command and FCONTD...

Page 103 - GET RGBOFFSET

User Command Specifications ９．Details of command GET RGBOFFSET 1 GET RGBOFFSET GET RGBOFFSET GET□RGBOFFSET?△RGBOFFSET For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command ...

Page 105 - GET MEMCADJ

User Command Specifications ９．Details of command GET MEMCADJ 1 GET MEMCADJ GET MEMCADJ GET□MEMCADJ?△MEMCADJ g:MEMCADJ=<Details of adjustment：ＩＤ> For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus lens is being driven....

Page 106 - GET 6AXADJ

User Command Specifications ９．Details of command GET 6AXADJ 1 GET 6AXADJ GET 6AXADJ GET□6AXADJ?△6AXADJ g:6AXADJ=<Setting：ＩＤ> For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCON...

Page 108 - GET LAMP

User Command Specifications 9 ． Details of command GET LAMP 1 GET LAMP GET LAMP GET □ LAMP ? □ LAMP g:LAMP=<Setting ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （Refer to the ZCONTDRV command a...

Page 110 - GET AVOL

User Command Specifications 9 ． Details of command GET AVOL 1 GET AVOL GET AVOL GET □ AVOL ? △ AVOL g:AVOL=<Volume setting: Number> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDR...

Page 111 - GET MUTE

User Command Specifications 9 ． Details of command GET MUTE 1 GET MUTE GET MUTE GET □ MUTE ? △ MUTE g:MUTE=<Setting ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command ...

Page 112 - GET BVOL

User Command Specifications 9 ． Details of command GET BVOL 1 GET BVOL GET BVOL GET □ BVOL ? △ BVOL g:BVOL=<Setting ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command a...

Page 113 - GET IMAGEFLIP

User Command Specifications 9. Details of command GET IMAGEFLIP 1 GET IMAGEFLIP GET IMAGEFLIP GET □ IMAGEFLIP ? △ IMAGEFLIP g:IMAGEFLIP=<Setting ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ R...

Page 114 - GET PMM

User Command Specifications 9. Details of command GET PMM 1 GET PMM GET PMM GET □ PMM ? △ PMM g:PMM=<Setting ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command and FCO...

Page 115 - GET PJON

User Command Specifications 9. Details of command GET PJON 1 GET PJON GET PJON GET □ PJON ? △ PJON g:PJON=<Setting ：ＩＤ > -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command and FCONTDRV command. ） -2 The setting for the screen dis...

Page 116 - GET NOSIG

User Command Specifications 9 ． Details of command GET NOSIG 1 GET NOSIG GET NOSIG GET □ NOSIG ? △ NOSIG g:NOSIG=<Setting ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV co...

Page 117 - GET NOSHOW

User Command Specifications 9 ． Details of command GET NOSHOW 1 GET NOSHOW GET NOSHOW GET □ NOSHOW ? △ NOSHOW g:NOSHOW=<Setting ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONT...

Page 118 - GET LOGOPOS

User Command Specifications 9 ． Details of command GET LOGOPOS 1 GET LOGOPOS GET LOGOPOS GET □ LOGOPOS ? △ LOGOPOS g:LOGOPOS=<Setting ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the...

Page 119 - GET LANG

User Command Specifications 9. Details of command GET LANG 1 GET LANG GET LANG GET □ L ＡＮＧ ? △ＬＡＮＧ g:LANG=<Language ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （Refer to the ZCONTDRV command a...

Page 120 - GET TERMINAL

User Command Specifications 9. Details of command GET TERMINAL 1 GET TERMINAL GET TERMINAL GET □ TERMINAL ? △ TERMINAL g:TERMINAL=<Setting ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer t...

Page 121 - GET KEYLOCK

User Command Specifications 9 ． Details of command GET KEYLOCK 1 GET KEYLOCK GET KEYLOCK GET □ KEYLOCK ? △ KEYLOCK g:KEYLOCK=<Setting ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the...

Page 122 - GET RCCH

User Command Specifications 9 ． Details of command GET RCCH 1 GET RCCH GET RCCH GET □ RCCH ? △ RCCH g:RCCH=<Setting ：ＩＤ > For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command ...

Page 123 - GET GUIDE

User Command Specifications ９．Details of command GET GUID 1 GET GUIDE GET GUIDE GET□GUIDE?△GUIDE g:GUIDE=<Setting：ＩＤ> For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV co...

Page 124 - GET DPON

User Command Specifications ９．Details of command GET DPON 1 GET DPON GET DPON GET□DPON?△DPON g:DPON=<Setting：ＩＤ> (1) However, a "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command and FCONTDRV command. ） (2) Direct power-on can be set ...

Page 125 - GET LEDILLUMINATE

User Command Specifications ９．Details of command GET LEDILLUMINATE 1 GET LEDILLUMINATE GET LEDILLUMINATE GET□LEDILLUMINATE?△LEDILLUMINATE g:LEDILLUMINATE=<Setting：ＩＤ> For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus...

Page 126 - GET NOSHOWSTATE

User Command Specifications ９．Details of command GET NOSHOWSTATUS 1 GET NOSHOWSTATE GET NOSHOWSTATE GET□NOSHOWSTATE?△NOSHOWSTATE g:NOSHOWSTATE=<Status：ＩＤ> For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus lens is bei...

Page 127 - GET FREEZE

User Command Specifications ９．Details of command GET FREEZE 1 GET FREEZE GET FREEZE GET□FREEZE?△FREEZE g:FREEZE=<Status：ＩＤ> For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONT...

Page 128 - GET SIGNALSTATUS

User Command Specifications 9 ． Details of command GET SIGNALSTATUS 1 GET SIGNALSTATUS GET SIGNALSTATUS GET □ SIGNALSTATUS ? △ SIGNALSTATUS g:SIGNALSTATUS=<Signal status ：ＩＤ > NO_SIGNAL Signal not detected DISPLAYING Image now displayed or display enable statusSETTING Signal detection and disp...

Page 129 - GET LAMPCOUNTER

User Command Specifications 9 ． Details of command GET LAMPCOUNTER 1 GET LAMPCOUNTER GET LAMPCOUNTER GET □ LAMPCOUNTER ? △ LAMPCOUNTER g:LAMPCOUNTER="<Lamp ON time: Character string>" For all other responses, refer to "Error List." -1 This inquiry can be executed in any status ...

Page 130 - GET ERR

User Command Specifications 9 ． Details of command GET ERR 1 GET ERR GET ERR GET □ ERR ? △ ERR g:ERR=<Error ＩＤ : ＩＤ > NO_ERROR No error ABNORMAL_TEMPERATUR Temperature error FAULTY_LAMP Lamp error FAULTY_LAMP_COVER Lamp cover error FAULTY_COOLING_FAN Cooling fan error FAULTY_POWER_SUPPLY Power...

Page 131 - GET PRODCODE

User Command Specifications 9 ． Details of command GET PRODCODE 1 GET PRODCODE GET PRODCODE GET □ PRODCODE ? △ PRODCODE g:PRODCODE="<Product name: Character string>" For all other responses, refer to "Error List." -1 This inquiry can be executed in any status provided that AC p...

Page 132 - GET ROMVER

User Command Specifications ９．Details of command GET ROMVER 1 GET ROMVER GET ROMVER GET □ ROMVER ? △ ROMVER g:ROMVER="<ROM VERSION ： Character string>" <ROM VERSION> := 99.9999 -1 This inquiry can be executed in any status provided that AC power is supplied to the projector. >...

Page 133 - GET COMVER

User Command Specifications 9 ． Details of command GET COMVER 1 GET COMVER GET COMVER GET □ COMVER ? △ COMVER g:COMVER="<User command version ： Character string>" <User command version> := 99.9999 For all other responses, refer to "Error List." -1 This inquiry can be exec...

Page 134 - RANGE

User Command Specifications 9. Details of command RANGE 2 RANGE RANGE RANGE □ <Parameter> Screen color correction value (RGB)Color saturation setting valueHue setting valueRGB gain adjustmentRGB offset adjustmentAdvanced color correction methodMemory color correction6-axis adjustment ON/OFF Ve...

Page 136 - RANGE POWER

User Command Specifications 9 ． Details of command RANGE POWER 1 RANGE POWER RANGE POWER RANGE □ POWER r:POWER=I, <Setting option 1>, <Setting option 2>, ..., <Setting option n> -1 This inquiry can be executed in any status provided that AC power is supplied to the projector. A ...

Page 137 - RANGE BLANK

User Command Specifications ９．Details of command RANGE BLANK 1 RANGE BLANK RANGE BLANK RANGE□BLANK r:BLANK=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." (1) However, a "busy" response is given while ...

Page 138 - RANGE AUTOSETEXE

User Command Specifications ９．Details of command RANGE AUTOSETEXE 1 RANGE AUTOSETEXE RANGE AUTOSETEXE RANGE□AUTOSETEXE r:AUTOSETEXE=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." (1) However, a "busy"...

Page 139 - RANGE INPUT

User Command Specifications 9 ． Details of command RANGE INPUT 1 RANGE INPUT RANGE INPUT RANGE □ INPUT r:INPUT=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." -1 This inquiry can be made in the power-on status...

Page 140 - RANGE DOTS

User Command Specifications 9 ． Details of command RANGE DOTS 1 RANGE DOTS RANGE DOTS RANGE □ DOTS r:DOTS=N, <Minimum setting value>, <Maximum setting value> For all other responses, refer to "Error List." -1 A "busy" response is given while the zoom or focus lens is bein...

Page 141 - RANGE TRACK

User Command Specifications 9 ． Details of command RANGE TRACK 1 RANGE TRACK RANGE TRACK RANGE □ TRACK r:TRACK=N, <Minimum setting value>, <Maximum setting value> -1 A "busy" response is given while the zoom or focus lens is being driven. With some input signals, it may not be po...

Page 144 - RANGE SEL

User Command Specifications ９．Details of command RANGE SEL 1 RANGE SEL RANGE SEL RANGE □ SEL r:SEL=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. With some input signals, it may no...

Page 145 - RANGE ASPECT

User Command Specifications 9 ． Details of command RANGE ASPECT 1 RANGE ASPECT RANGE ASPECT RANGE □ ASPECT r:ASPECT=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. With some input s...

Page 146 - RANGE IMAGE

User Command Specifications 9 ． Details of command RANGE IMAGE 1 RANGE IMAGE RANGE IMAGE RANGE □ IMAGE r:IMAGE=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE IMAGE<...

Page 147 - RANGE BRI

User Command Specifications 9 ． Details of command RANGE BRI 1 RANGE BRI RANGE BRI RANGE □ BRI r:BRI=N, <Minimum setting value>, <Maximum setting value> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE BRI< r:BRI=N, -20, 20 * Commands a...

Page 148 - RANGE CONT

User Command Specifications 9 ． Details of command RANGE CONT 1 RANGE CONT RANGE CONT RANGE □ CONT r:CONT=N, <Minimum setting value>, <Maximum setting value> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE CONT< r:CONT=N, -20, 20 * Com...

Page 149 - RANGE SHARP

User Command Specifications 9 ． Details of command RANGE SHARP 1 RANGE SHARP RANGE SHARP RANGE □ SHARP r:SHARP=N, <Minimum setting value>, <Maximum setting value> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE SHARP< r:SHARP=N, -4, 4 ...

Page 150 - RANGE GAMMA

User Command Specifications 9 ． Details of command RANGE GAMMA 1 RANGE GAMMA RANGE GAMMA RANGE □ GAMMA r:GAMMA=N, <Minimum setting value>, <Maximum setting value> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE GAMMA< r:GAMMA=N, -4, 4 ...

Page 151 - RANGE DGAMMA

User Command Specifications 9 ． Details of command RANGE DGAMMA 1 RANGE DGAMMA RANGE DGAMMA RANGE □ DGAMMA r:DGAMMA=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE DGA...

Page 152 - RANGE PROG

User Command Specifications 9 ． Details of command RANGE PROG 1 RANGE PROG RANGE PROG RANGE □ PROG r:PROG=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. With some input signals, it...

Page 153 - RANGE WB

User Command Specifications 9 ． Details of command RANGE WB 1 RANGE WB RANGE WB RANGE □ WB r:WB=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE WB< r:WB=I, NORMAL, ...

Page 154 - RANGE WBRGB

User Command Specifications 9 ． Details of command RANGE WBRGB 1 RANGE WBRGB RANGE WBRGB RANGE □ WBRGB -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE WBRGB< r:WBRGB=N, -20, 20, -20, 20, -20, 20 * Commands are indicated by ">", and resp...

Page 155 - RANGE SAT

User Command Specifications 9 ． Details of command RANGE SAT 1 RANGE SAT RANGE SAT RANGE □ SAT r:SAT=N, <Minimum setting value>, <Maximum setting value> -1 A "busy" response is given while the zoom or focus lens is being driven. With some input signals, it may not be possible to ...

Page 156 - RANGE HUE

User Command Specifications 9 ． Details of command RANGE HUE 1 RANGE HUE RANGE HUE RANGE □ HUE r:HUE=N, <Minimum setting value>, <Maximum setting value> -1 A "busy" response is given while the zoom or focus lens is being driven. With some input signals, it may not be possible to ...

Page 157 - RANGE RGBGAIN

User Command Specifications ９．Details of command RANGE RGBGAIN 1 RANGE RGBGAIN RANGE RGBGAIN RANGE□RGBGAIN For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command and FCONTDR...

Page 158 - RANGE RGBOFFSET

User Command Specifications ９．Details of command RANGE RGBOFFSET 1 RANGE RGBOFFSET RANGE RGBOFFSET RANGE□RGBOFFSET For all other responses, refer to "Error List." (1) However, a "busy" response is given while the zoom or focus lens is being driven. （ Refer to the ZCONTDRV command and...

Page 159 - RANGE ACADJUST

User Command Specifications 9 ． Details of command RANGE ACADJUST 1 RANGE ACADJUST RANGE ACADJUST RANGE □ ACADJUST r:ACADJUST=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 >...

Page 160 - RANGE MEMCADJ

User Command Specifications ９．Details of command RANGE MEMCADJ 1 RANGE MEMCADJ RANGE MEMCADJ RANGE□MEMCADJ r:MEMCADJ=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." (1) However, a "busy" response is gi...

Page 161 - RANGE 6AXADJ

User Command Specifications ９．Details of command RANGE 6AXADJ 1 RANGE 6AXADJ RANGE 6AXADJ RANGE□6AXADJ r:6AXADJ=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." (1) However, a "busy" response is given w...

Page 163 - RANGE LAMP

User Command Specifications 9 ． Details of command RANGE LAMP 1 RANGE LAMP RANGE LAMP RANGE □ LAMP r:LAMP=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE LAMP< r:LA...

Page 165 - RANGE AVOL

User Command Specifications 9 ． Details of command RANGE AVOL 1 RANGE AVOL RANGE AVOL RANGE □ AVOL r:AVOL=N, <Minimum setting value>, <Maximum setting value> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE AVOL< r:AVOL=N, 0, 20 * Comma...

Page 166 - RANGE MUTE

User Command Specifications 9 ． Details of command RANGE MUTE 1 RANGE MUTE RANGE MUTE RANGE □ MUTE r:MUTE=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE MUTE< r:MU...

Page 167 - RANGE BVOL

User Command Specifications 9 ． Details of command RANGE BVOL 1 RANGE BVOL RANGE BVOL RANGE □ BVOL r:BVOL=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE BVOL< r:BV...

Page 168 - RANGE IMAGEFLIP

User Command Specifications 9 .Details of command RANGE IMAGEFLIP 1 RANGE IMAGEFLIP RANGE IMAGEFLIP RANGE □ IMAGEFLIP r:IMAGEFLIP=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 ...

Page 169 - RANGE PMM

User Command Specifications 9 .Details of command RANGE PMM 1 RANGE PMM RANGE PMM RANGE □ PMM r:PMM=I, <Setting option 1>, <Setting option 2>, ..., <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE PMM< r:PMM=I, ...

Page 170 - RANGE PJON

User Command Specifications 9 ． Details of command RANGE PJON 1 RANGE PJON RANGE PJON RANGE □ PJON r:PJON=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE PJON< r:PJ...

Page 171 - RANGE NOSIG

User Command Specifications 9 ． Details of command RANGE NOSIG 1 RANGE NOSIG RANGE NOSIG RANGE □ PJON r:NOSIG=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE NOSIG<...

Page 172 - RANGE NOSHOW

User Command Specifications ９．Details of command RANGE NOSHOW 1 RANGE NOSHOW RANGE NOSHOW RANGE □ NOSHOW r:NOSHOW=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE NOSHO...

Page 173 - RANGE LOGOPOS

User Command Specifications ９．Details of command RANGE LOGOPOS 1 RANGE LOGOPOS RANGE LOGOPOS RANGE □ LOGOPOS r:LOGOPOS=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 -3 > RAN...

Page 174 - RANGE LANG

User Command Specifications 9 ． Details of command RANGE LANG 1 RANGE LANG RANGE LANG RANGE □ LANG r:LANG=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE LANG< * Co...

Page 175 - RANGE TERMINAL

User Command Specifications 9 ． Details of command RANGE TERMINAL 1 RANGE TERMINAL RANGE TERMINAL RANGE □ TERMINAL r:TERMINAL=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 >...

Page 176 - RANGE KEYLOCK

User Command Specifications 9 ． Details of command RANGE KEYLOCK 1 RANGE KEYLOCK RANGE KEYLOCK RANGE □ KEYLOCK r:KEYLOCK=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANG...

Page 177 - RANGE RCCH

User Command Specifications 9 ． Details of command RANGE RCCH 1 RANGE RCCH RANGE RCCH RANGE □ RCCH r:RCCH=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> -1 A "busy" response is given while the zoom or focus lens is being driven. -2 > RANGE RCCH< r:RC...

Page 178 - RANGE GUIDE

User Command Specifications ９．Details of command RANGE GUID 1 RANGE GUIDE RANGE GUIDE RANGE□GUIDE r:GUIDE=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." (1) However, a "busy" response is given while t...

Page 179 - RANGE DPON

User Command Specifications ９．Details of command RANGE DPON 1 RANGE DPON RANGE DPON RANGE□DPON r:DPON=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." (1) However, a "busy" response is given while the z...

Page 180 - RANGE LEDILLUMINATE

User Command Specifications ９．Details of command RANGE LEDILLUMINATE 1 RANGE LEDILLUMINATE RANGE LEDILLUMINATE RANGE□LEDILLUMINATE r:LEDILLUMINATE=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." (1) However, a...

Page 181 - RANGE ZSTEPDRV

User Command Specifications ９．Details of command RANGE ZSTEPDRV 1 RANGE ZSTEPDRV RANGE ZSTEPDRV RANGE□ZSTEPDRV r:ZSTEPDRV=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." This command is used to inquire about t...

Page 182 - RANGE ZCONTDRV

User Command Specifications ９．Details of command RANGE ZCONTDRV 1 RANGE ZCONTDRV RANGE ZCONTDRV RANGE□CONTZDRV r:ZCONTDRV=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." (1) However, a "busy" response ...

Page 183 - RANGE FSTEPDRV

User Command Specifications ９．Details of command RANGE FSTEPDRV 1 RANGE FSTEPDRV RANGE FSTEPDRV RANGE□FSTEPDRV r:FSTEPDRV=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." This command is used to inquire about t...

Page 184 - RANGE FCONTDRV

User Command Specifications ９．Details of command RANGE FCONTDRV 1 RANGE FCONTDRV RANGE FCONTDRV RANGE□FCONTDRV r:FCONTDRV=I, <Setting option 1>, <Setting option 2>, …, <Setting option n> For all other responses, refer to "Error List." (1) However, a "busy" response ...