Canon REALiS SX80 Mark II D- Manuals

5 Quick Reference Guide This Quick Reference Guide will help you find functions that make full use of the projector, are useful in producing an attractive presentation, and so on. Connecting to the Computer ( P40 – P43 ) Connecting to AV Equipment ( P44 – P47 ) Connecting a Digital Camera (SX80 II) ...

6 Table of Contents Features of SX80 MarkII/SX800 Multimedia Projector .............................................. 2 Quick Reference Guide................................................................................................ 5 Safety Instructions ...........................................

12 Safety Instructions Before operating this projector, read this manual thoroughly in order to operate the projector properly.This projector offers many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in good condition for a l...

13 Safety Instructions Sa fe ty Instructions Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. • This projector projects intense light from the projection lens. Do not stare directly into the lens if possible, as doing so may ...

Safety Instructions 14 ■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cle...

Safety Instructions 16 AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirements for use in the country you purchased it. THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE. AC Power Cord for the United States and Canada: The AC Power...

17 Safety Instructions Sa fe ty Instructions Federal Communication Commission Notice Multimedia Projector, Model: SX80 MarkII/SX800This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this ...

Safety Instructions 18 Precautions on Handling the Batteries in the Remote Controller Lamp Handling Precautions This projector uses a high-pressure mercury lamp which must be handled carefully and correctly as mentioned below.The mercury lamp has the following characteristics. • A lamp may explode w...

19 Safety Instructions Sa fe ty Instructions Carrying/Transporting the Projector Installation Precautions Disposal of Waste Lamp • Dispose of the projector's mercury lamp according to local regulations just like the fluorescent lamps. • This projector is a precision machine. Do not subject the proje...

Safety Instructions 20 Position the projector in a horizontal position. Incorrect installation may cause troubles and accidents.• Do not tilt the projector more than 20 degrees above and below the horizontal. • When you want to use your projector point- ing up or down, make sure to place the pro-jec...

21 Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II) Connecting the Projector to Network (SX80 II) Appendix Index Before Use

22 Supplied Accessories Check whether the following accessories are supplied with the projector. ■ Installing the Lens Cap As shown in the illustration on the right, put the lens cap strap through the hole on the lens cap, and then through the lens cap strap insertion hole at the bottom of the pro-j...

23 Supplied Accessories Be fo re Use ■ Putting the Projector in the Carrying Bag Store the projector and the accessories in the carrying bag as shown in the illustration below.The carrying bag is intended to protect the surfaces of the projector from dust or scratches, and is not designed to protect...

24 Part Names Main Unit of Projector (SX80 MarkII is used in the following illustrations) ■ Front Side ■ Rear Side Terminals and connectors Infrared remote receiver ( P31 ) Lens Adjustable foot lock button ( P37 ) Anti-theft lock hole An anti-theft wire cable available on the mar-ket can be connecte...

25 Part Names Be fo re Use ■ Bottom Side Mounting the Projector on the Ceiling You can mount the projector on the ceiling.You need an optional ceiling mounting hanger (part number: RS-CL10) and an optional ceil-ing-mount pipe (part number: RS-CL08 or RS-CL09) when appropriate. Contact the dealer whe...

Part Names 26 Remote Control The projector can be operated using buttons on the remote control or the top control on the main unit.The remote control allows you to operate all functions of the projector. POWER button ( P49 , P68 ) Turns the projector on or off. ASPECT button ( P66 ) Toggles between ...

27 Part Names Be fo re Use AUTO SET button ( P53 ) Performs input signal setting, keystone distortion adjustment, focusing (SX80 II), and screen color correction (SX80 II) automatically. INPUT button ( P55 ) Switches among input signals. ZOOM button ( P58 ) Adjusts the image size.[ ] [ ]: For rough ...

Part Names 28 Top Control KEYSTONE button Corrects keystone distortion. ( P60 ) [ ] [ ]: For keystone adjustment.Press KEYSTONE and then AUTO SET to adjust the keystone automatically. • Moves the image up and down when the D. image shift is selected. ( P64 ) • [ ] [ ]: Adjust the vertical position. ...

29 Part Names Be fo re Use Input Terminals ■ SX80 MarkII ■ SX800 (1)-A ANALOG PC-1/DVI-I IN Input Terminal ( DVI-I IN) (SX80 II) ( P40 , P42 ) (1)-B ANALOG PC-1 Input Terminal ( IN) (SX800) ( P40 ) Connects an external monitor output from a computer.Receives an analog PC (ANALOG PC-1) or a digital s...

31 Be fo re Use Preparing the Remote Control ■ Installing Remote Control Batteries ■ Remote Control Operating Range Point the remote control to the infrared remote receiver on the front or rear of the projector whenever pressing any button. • If buttons on the remote control are inoperative when you...

34 Steps for Setting Up the Projector and Projecting an Image Performing the Auto Setup ( P52 ) Connecting the Projector to Equipment ( P38 , P39 ) Turning on the Power ( P49 ) Selecting an Input Signal ( P54 ) Adjusting the Image ( P56 ) Do the following adjustments.• Setting the Display Resolution...

35 Proje cti ng an Im age Setting Up the Projector ■ Placing in Front of the Screen Place the projector in front of the screen. • Be sure to place the projector parallel to the screen to ensure distortion-free projections. • The screen must not be exposed to direct sun- light or light from lighting ...

Setting Up the Projector 36 ■ Placing on a Level Place Be sure to keep the projector as horizontal as possible.If you need to point the projector up (for example, when the screen is placed on a higher position), follow the instruction given in "When Pointing the Projector Up" on the followin...

37 Setting Up the Projector Proje cti ng an Im age ■ When Pointing the Projector Up When the screen is placed on a higher position, point the projector up using the adjust-able foot.You can point it up as far as 10 degrees.The keystone distortion of the projecting image can be corrected with the aut...

38 Connecting the Projector Connectable Equipment and Input Terminals DIGITAL PC ANALOG PC-1 Use this name to select the appropriate image. : Video signal or data flow DVI-I IN terminal The name of the terminal to which to connect equipment. ( Pxxx ) : indicates the page(s) to refer to. Computer ( P...

Connecting the Projector 40 Connecting the Projector to the Computer Connect the projector to the computer.Before connecting the cables, turn off both the projector and computer. ■ Connecting to RGB Monitor Output Terminal (analog connection) Supplied computer connection cable (Input signal type: [A...

Connecting the Projector 42 ■ Connecting to DVI Monitor Output Terminal (digital connection) (SX80 II) DVI cable (Input signal type: [DIGITAL PC] - P54 ) ■ Outputting an Image and Audio Outputting an Image (SX80 II) Images can be output to an external monitor via [ANALOG PC-1], [ANALOG PC-2] and [CO...

43 Connecting the Projector Proje cti ng an Im age Outputting Audio to Speakers It is possible to output sound of projected images to AV equipment or amplified speakers. • The speaker outputs the audio signal corresponding to the selected image signal.• Use an audio cable without a built-in resistor...

Connecting the Projector 44 Connecting to AV Equipment Connect the projector and AV equipment.Before connecting the cables, turn off both the projector and AV equipment.The description provided here is just examples. For more detailed information, refer to the manual for the connecting AV equipment....

45 Connecting the Projector Proje cti ng an Im age ■ Connecting to Analog Video Output Terminal (analog connection) Video cable (Input signal type: [VIDEO] or [S-VIDEO] - P54 ) Connect the projector and AV equipment using a video or S-VIDEO cable that fits to the terminal type of the AV equipment.Th...

Connecting the Projector 48 ■ Connecting a Digital Camera or an USB Flash Memory (SX80 II) SX80 MarkII supports PictBridge.You can connect a PictBridge enabled digital camera, a digital video camera, an USB flash memory, or an USB memory card reader to directly project images. Digital camera USB mem...

49 Proje cti ng an Im age Starting Projection 1 Check the connection between the projector and a computer or AV equipment. ( P38 – P48 ) 2 Connect the power cord and make sure that the [POWER] indicator lights up red. Flashing red [POWER] indicator indicates that the lamp is being cooled. Wait until...

Starting Projection 50 5 Press the AUTO SET button. The auto setup function performs the following operations automatically:SX80 MarkII: focusing and keystone distortion adjustment, input signal setting, and screen color correction SX800: keystone distortion adjustment and input signal setting For m...

51 Starting Projection Proje cti ng an Im age ■ When the Password Input Screen Appears If you have set a password, the Password input screen appears. Enter your password. ( P108 ) ■ When "No signal" Appears A notebook computer requires to turn on the external monitor output. ( P51 ) Press th...

52 Setting Up the Screen Automatically Auto Setup The auto setup function automatically makes the following settings and adjustments. Use the auto setup function when:• You turned the power on and the countdown sequence was completed.• You changed the position or angle of the projector during the pr...

53 Setting Up the Screen Automatically Proje cti ng an Im age ■ Performing the Auto Setup Press the AUTO SET button to perform the auto setup. • After the auto setup is complete, the following window appears. Press the OK button. Remote control Top control SX80 MarkII SX800

54 Selecting an Input Signal (INPUT) Select an appropriate input signal in the [INPUT] menu if you want to project a digital PC or AV equipment signal or you connect multiple computers or AV equipment to receive their input signals.Skip this step if you have not changed the input signal since the la...

55 Selecting an Input Signal (INPUT) Proje cti ng an Im age ■ Selecting an Input Signal 1 Press the INPUT button to pop up a window shown at the lower right. The currently active input signal is marked with a circle and highlighted in orange.An input signal that is ready for projection is displayed ...

56 Adjusting Image Setting the Display Resolution of the Computer Set the display resolution of the computer to "1400 x 1050 pixels" or a resolution closest to the output signal resolution of the computer based on the performance of the projector (resolution: 1400 x 1050 pixels). ( P150 ) ■ ...

57 Adjusting Image Proje cti ng an Im age AUTO PC When you press the AUTO PC button if there is a shift in image display or flickering of screen with the [ANALOG PC-1] or [ANALOG PC-2] selected, the projector is adjusted to an optimum condition.The result of adjustment is recorded for each input sig...

59 Adjusting Image Proje cti ng an Im age Adjusting the Focus You can adjust the focus with the FOCUS button. The projection image may be out of focus if the projection distance is beyond the range of 1.2 m (3.9') to 9.1 m (29.6'). Move the projector installation position if such is the case. ( P35 ...

Adjusting Image 60 Adjusting Keystone Distortion The D.SHIFT/KEYSTONE button corrects the keystone distortion. ■ Auto adjustment Press the D.SHIFT/KEYSTONE button, and then the AUTO SET button. ■ Manual adjustment 1 Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right. 2 Pre...

61 Adjusting Image Proje cti ng an Im age 3 When the keystone distortion has been adjusted, press the OK button. ■ Resetting the Keystone Adjustment Perform the following steps to reset the keystone adjustment.Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window. On the win...

62 Selecting Screen Aspect and Aspect Select an optimum aspect ratio of the projecting image (screen aspect) or an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection making best use of the screen size. • [Screen aspect] :...

Selecting Screen Aspect and Aspect 64 ■ Moving Image with 16:9 D. Image Shift 1 Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right. 2 Use [ ] / [ ] to move the image. 3 When the image shift adjustment has been completed, press the OK button. ■ Resetting the Image Shift Per...

65 Selecting Screen Aspect and Aspect Proje cti ng an Im age Selecting Aspect Ratio Select the aspect ratio of projecting image based on the input signal type, aspect ratio of the screen and resolution.For more details on the aspect ratios, refer to "When Projecting an Image from a Com-puter"...

Selecting Screen Aspect and Aspect 66 ■ How to Select an Aspect Ratio Press the ASPECT button on the remote control to select an appropriate aspect ratio. The selection is toggled among types for aspect ratios by pressing the ASPECT button. For more details on the aspect ratios, refer to "When P...

67 Proje cti ng an Im age Selecting an Image Mode You can select an image mode depending on the projecting image.In each image mode, you can further adjust the brightness, contrast, sharpness, gamma, color adjustment, advanced adjustment, and lamp mode. ( P93 ) ■ Image modes Standard Select this to ...

68 Turning Off the Projector 1 Press the POWER button to pop up a window shown at the lower right. Press the POWER button again while the confirmation message is displayed. The lamp goes off, the [POWER] indicator starts flashing in red and the cooling fan starts. 2 Remove the power cord from the AC...

70 Useful Functions Available During a Presentation Blackened Out an Image Temporarily Useful when: • You finished the presentation.• You want to divert attendees' attention from the screen. Press the button to blacken out the image.Press the button again to show the image. • You can set the screen ...

71 Useful Functions Available During a Presentation Useful Functions A vailable During a Prese ntation Adjusting the Volume Useful when: • You want to adjust the volume level of the pro- jectors or external speaker. Press the button. The following screen appears. • You can also adjust the volume lev...

Useful Functions Available During a Presentation 72 Zooming an Image Useful when: • Zoom in an object such as a small graph dur- ing a presentation (up to 12x). • Focusing on the current subject. Press the button. A part of the image is enlarged each time pressed. • The magnification appears on the ...

73 Useful Functions Available During a Presentation Useful Functions A vailable During a Prese ntation Showing the Elapsed Time Useful when: • You want to manage the proceedings of the presentation. Press the button to start counting. • The elapsed time is displayed at the lower right corner of the ...

76 How to Use Menus With a menu, you can set the operation of the projector in detail. ■ Menu Configuration The menu screen is divided into four tabs as follows: Input Signal Types for which a Menu Item is Displayed Different menu items are displayed for different input signal types.In the following...

How to Use Menus 77 Setting Up Functions fr om Menu s ■ Basic Operation of Menu 1 Press the MENU button to display a menu window. 2 Use [<] / [>] to select a tab. • If the tab position is not highlighted in orange, use [ ] / [ ] to move the highlight to the top. 3 Use [ ] / [ ] to select a ite...

79 Setting Up Functions fr om Menu s Setting Display Status Selecting an Image Projection Mode [Aspect] You can select a projection mode corre-sponding to the aspect ratio of image. • Different contents are displayed for dif- ferent screen aspects or input signal types. • The ASPECT button on the re...

Setting Display Status 82 Adjusting Input Signal (ANALOG PC) – Tracking [Input signal settings] - [Tracking] You can fine-tune the timing for generating an image from the image signal.Adjusts the tracking when the image dis-torts or flickers. Use [<] / [>] to select a value.When you have compl...

85 Setting Display Status Setting Up Functions fr om Menu s Select HDMI Over Scan (SX80 II) [HDMI over scan] You can select this as required when you project visual software with the HDMI sig-nals. Press the OK button to accept your setting and then press the MENU button. • [On] is the factory defau...

Setting Display Status 86 Selecting a Menu Position [Menu position] You can change the position of menu dis-played. Move the menu to the desired position with [ ] / [<] / [ ] / [>]. When the menu has been moved to the desired position, press the OK or MENU button. Correcting the Screen Color [...

87 Setting Display Status Setting Up Functions fr om Menu s Reversing projection [Image flip H/V] You can make this setting if you want to hang the projector from the ceiling or project an image from behind the screen. Press the OK button to accept your setting and then press the MENU button. • [Non...

91 Setting Display Status Setting Up Functions fr om Menu s Screen When Blank (SX800) [User screen settings] - [Screen when blank] You can display a user logo a screen when the projected image is blackened out temporarily by pressing the BLANK button on the remote control. Press the OK button to acc...

Setting Display Status 92 Selecting Aspect Ratio of Screen [Screen aspect] You can select proper option corresponding to the aspect ratio of the projecting screen. Press the OK button to accept your setting and then press the MENU button. • [4:3] is the factory default.• If you select [16:9 D. image...

93 Setting Up Functions fr om Menu s Setting the Image Quality Selecting an Image Quality [Image mode] You can select an image mode suitable for the projecting image.You can select it also with the IMAGE but- ton on the remote control. SX80 MarkII Press the OK button to accept your setting and then ...

Setting the Image Quality 94 Adjusting the Brightness [Brightness] You can adjust the brightness of images. SX80 MarkII When you have completed the adjust-ment, press the MENU button. • The adjustment you have made is stored as an adjusted value of input sig-nals being projected in an image mode. Ad...

95 Setting the Image Quality Setting Up Functions fr om Menu s Adjusting the Sharpness [Sharpness] You can adjust the sharpness of images. SX80 MarkII When you have completed the adjust-ment, press the MENU button. • The adjustment you have made is stored as an adjusted value of input sig-nals being...

101 Setting the Image Quality Setting Up Functions fr om Menu s Correcting the Image According to the Ambient Light (SX80 II) [Ambient light] You can correct and project an image more appropriately according to the ambi-ent light on the screen if you have selected [Photo] for [Image mode]. An Exampl...

Setting the Image Quality 102 Reducing the Lamp Brightness [Lamp mode] Reducing the lamp brightness reduces power consumption and cooling fan noise. You can enable or disable this mode also with the LAMP button on the remote con- trol. SX80 MarkII Press the OK button to accept your setting and then ...

103 Setting Up Functions fr om Menu s Setting Various Function Setting Auto Setup Function [Auto setup] You can select an items you want to enable in the auto setup function. SX80 MarkII Select [On] for the items if you want to enable in auto setup function. Press the OK button to accept your settin...

Setting Various Function 104 Skip the POWER Button Operation [Direct power on] You can turn on the projector only by con-necting the power cable without pressing the POWER button. Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. Enabling/Disa...

105 Setting Various Function Setting Up Functions fr om Menu s Prohibiting the Projector Operation [Key lock] You can prohibit the operation of the projector from either the top control or remote control. Press the OK button to accept your setting and then press the MENU button. • [Off] is the facto...

Setting Various Function 106 Showing/hiding the Guide Screen [Guide] You can select whether to show or hide the guide screen which explains operations. Press the OK button to accept your setting and then press the MENU button. • [On] is the factory default.• The guide screen is shown when: - Power i...

107 Setting Various Function Setting Up Functions fr om Menu s Setting for Slideshow (SX80 II) [Slideshow interval] You can project the images stored in a PictBridge-compatible device ( P114 ) or a USB flash memory ( P118 ) in the slide- show. Use [<] / [>] to set the interval (minutes: second...

Setting Various Function 108 Extending the Menu Display Time [Other settings] - [Menu display time] You can extend the menu display time, which is 30 seconds usually, to 3 minutes. Press the OK button to accept your setting and then press the MENU button. • [Normal] is the factory default.• You cann...

109 Setting Various Function Setting Up Functions fr om Menu s Registering a Password [Other settings] - [Register password] You can register a password for starting projection. Press the OK button after selecting [Reg- ister password], and the following screen for registering a password appears: En...

Setting Various Function 110 Select [OK] on the screen for confirmation, press the OK button, and the lamp counter is reset. Press the MENU button. ■ About the Display of the Lamp Counter The lamp counter displays the hours of use of the lamp in the following way: Less than 1,800 hours Displayed in ...

111 Setting Various Function Setting Up Functions fr om Menu s Initializing network settings (SX80 II) [Other settings] -[Network setting initialization] You can Initialize the network settings. Press the OK button after selecting [Net- work setting initialization], and the follow-ing screen for con...

112 Checking the Information of the Projector [Information] You can confirm the information about the signal types of the images projected and other projector-specific information. Information shown HDMI COMPONENT DIGITAL PC VIDEO/S-VIDEO ANALOG PC USB Item Meaning Model name Model name of this proj...

114 Projecting an Image from a Digital Camera (SX80 II) SX80 MarkII supports PictBridge. You can directly project an image by connecting the projector with a PictBridge-compatible digital camera, digital video camera or camera-equipped mobile phone (hereinafter called "PictBridge-compatible devi...

115 Projecting an Image from a Digital Camera (SX80 II) Projec ting a n Image from a Dig ital Came ra or an USB Flash M emory (SX80 II) 3 Connect a PictBridge-compatible device with the projector using a USB cable. The terminal form of the device varies depending on the model. Refer to the User's Ma...

Projecting an Image from a Digital Camera (SX80 II) 116 Operating the Projected Image When images are projected, you can perform the following operations. ■ Switching to the Next Image If you have specified multiple images for printing with the digital camera, you can switch to the next image by pre...

117 Projecting an Image from a Digital Camera (SX80 II) Projec ting a n Image from a Dig ital Came ra or an USB Flash M emory (SX80 II) Running a Slideshow You can run a slideshow that projects multiple images stored in the digital camera at cer-tain intervals. ■ Setting a Slideshow Interval By sett...

118 Projecting Data on USB Flash Memory (SX80 II) You can connect a USB flash memory to the projector for direct projection of the images (saved in JPEG for-mat) saved in the USB flash memory.• Images saved only in JPEG format are available for projection. Connecting an USB Flash Memory 1 Turn the p...

119 Projecting Data on USB Flash Memory (SX80 II) Projec ting a n Image from a Dig ital Came ra or an USB Flash M emory (SX80 II) 3 Connect a USB flash memory. Connect a USB flash memory to the USB terminal.Use a USB cable to connect a digital camera or USB memory card reader.Be sure to use the USB ...

Projecting Data on USB Flash Memory (SX80 II) 120 Description of USB File Browser If a USB flash memory is connected to the projector, the USB file browser appears.In the USB file browser, you can select the image file to be projected by operating the file list in the USB memory device. List title D...

121 Projecting Data on USB Flash Memory (SX80 II) Projec ting a n Image from a Dig ital Came ra or an USB Flash M emory (SX80 II) Selecting an Image for Projection This section describes the steps for selecting an image in the USB file browser and pro-jecting on the screen. ■ Selecting a Drive If a ...

Projecting Data on USB Flash Memory (SX80 II) 122 ■ Selecting an Image File for Projection 1 Select an image file with [ ] / [ ]. • To return to upper hierarchy, select and press the OK button. 2 Press the OK button to project the image in full screen. • To return to the USB file browser, press the ...

123 Projecting Data on USB Flash Memory (SX80 II) Projec ting a n Image from a Dig ital Came ra or an USB Flash M emory (SX80 II) Operating the Projected Image When images are projected, you can perform the following operations. ■ Switching to the Previous/Next Image If multiple image files are save...

Projecting Data on USB Flash Memory (SX80 II) 124 Running a Slideshow of Data saved in a USB Flash Memory You can run a slideshow that projects multiple images stored in a USB flash memory at certain intervals. ■ Creating an Image File Folder In the slideshow, image files in a folder are displayed i...

126 Setting an IP Address (SX80 II) It is possible to send an error notification e-mail ( P135 ) from the projector to the computer when you connect the projector to the network. To connect via the network, an IP address must be assigned to the projector. Set an IP address by following the steps bel...

127 Setting an IP Address (SX80 II) Conn ec tin g the Projector to N etwork (SX80 II) ■ Resetting the IP Address Setting of the Computer 1 Turn off the projector and remove the LAN cable. 2 Follow the step 3 to 6 to restore the network setting to the original setting.

128 Setting Network (SX80 II) ■ Displaying the Network Configuration Screen 1 Turn on the computer and projector . 2 Launch a web browser, enter "http://192.168.254.254" in the address bar, and press the Enter key . The password input screen appears.The supported web browsers is Microsoft In...

129 Setting Network (SX80 II) Conn ec tin g the Projector to N etwork (SX80 II) ■ Setting the Network 1 In the menu screen, click [Password], input the new user name and password, and click the [OK] button. Setting items:[User name]: The user name for logging in the network [New password]: The new p...

Setting Network (SX80 II) 130 3 Click [Mail], enter appropriate values in the following field for the error report, and click the [OK] button. Setting items:[To:]: The E-mail address to which the error report is sent (Within 63 alphanumeric characters) [Cc:]: The E-mail address to which the carbon c...

131 Setting Network (SX80 II) Conn ec tin g the Projector to N etwork (SX80 II) 4 If the SMTP mail server authentication is required, click [Mail auth], enter appropriate values in the following field, and click the [OK] button. Select one of the following four authentication method in [Mail authent...

Setting Network (SX80 II) 132 5 If you want to monitor the projector, click [SNMP], enter appropriate values in the fol-lowing field, and click the [OK] button. Select one of the following four SNMP version in [SNMP]. Select [OFF] if you don't want to monitor the projector.(The factory default: [OFF...

133 Setting Network (SX80 II) Conn ec tin g the Projector to N etwork (SX80 II) 6 Click [Projector info] and enter the projector name. • You can input 1 to 63 alphanumeric characters.• The factory default is [SX80 MarkII]. 7 Click [Location], enter the projector location, and click the [OK] button. ...

Setting Network (SX80 II) 134 If you want to test the error report transmission, click [Send test mail]. ■ Resetting the Network Setting 1 Click [Initialize] in the menu screen. 2 Click the [OK] button when the following dialog box is displayed. If you want to restore to the factory setting from the...

135 Setting Network (SX80 II) Conn ec tin g the Projector to N etwork (SX80 II) ■ Error Notification Message It sends the following message when an error occurs in the projector. Error list * Contact your Canon dealer. Errors related to temperature Error name Temperature abnormality Text The tempera...

Setting Network (SX80 II) 136 ■ Projector Control 1 Click the [Projector control] button on the network setting screen. The projector control screen appears.Controlled items:[Power]: Turn ON/OFF the projector ( P49 , P68 ) [Input]: Select an input signal ( P54 ) [Aspect]: Select an aspect ratio ( P6...

137 Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Projecting an Image from a Digital Camera or an USB Flash Memory (SX80 II) Connecting the Projector to Network (SX80 II) Appendix Index Appendix

138 Troubleshooting WARNING Lamp Flash Patterns The WARNING lamp on the Control Panel flashes in red after the projector is turned off when there is a trouble in the projector. • Wait until the cooling fan stops and disconnect the power plug from the AC outlet before dealing with the trouble. Flash ...

139 Troubleshooting Appendix Symptoms and Solutions ■ You cannot turn on the projector. ■ You cannot project an image from the projector. Cause Countermeasure The power cord is not connected correctly. Check whether the power cord is connected correctly. ( P49 ) Check that [Key lock] is not enabled....

Troubleshooting 140 ■ A digital camera or USB flash memory is not recognized. (SX80 II) ■ You cannot hear sound. Cause Countermeasure The external monitor output is not set on the notebook computer cor-rectly. Turn on the external monitor output on the notebook com-puter. To turn on the external mon...

141 Troubleshooting Appendix ■ The projected image is blur. ■ You cannot project an image appropriately. ■ The projector is forced to be turned off. Cause Countermeasure The image is out of focus. Adjust the focus. ( P59 ) The distance to the screen is too short. Check whether the distance to the sc...

Troubleshooting 142 ■ You cannot operate the remote control. The operating temperature is inap-propriate. Check whether the operating temperature is 5 to 35°C. ( P20 ) If you use the projector at 1900 meters or higher above sea level, contact your dealer. Other reasons The projector may be damaged. ...

143 Appendix Maintenance Cleaning the Projector Clean the projector frequently to prevent dust from settling on the surface.A dirty lens may ruin the quality of the projected image. Wipe the projector's main unit softly with a soft cloth.If the projector is heavily soiled, soak the cloth in water wi...

Maintenance 144 Cleaning and Replacing the Air Filter An air filter is installed in the air intake vent on the bottom of the main body to protect the internal lens and mirror from dust. Should the air filter become clogged with dust, the pro-jector may be damaged since it will block the air flow int...

145 Maintenance Appendix Replacing the Lamp When the time of use of the lamp exceeds the certain amount of time, the following mes-sage (two types) is displayed for 10 seconds every time the projector is turned on. 1,800 - less than 2,000 hours • After this screen has been displayed for 10 seconds a...

Maintenance 146 ■ Replacing the Lamp 1 Turn off the projector, disconnect the power plug from the AC outlet, and let the projector stand for at least 1 hour. 2 As shown in the figure, insert a flat-head screwdriver in the gap and remove the lamp cover by raising it. 3 Loosen two screws with a philli...

147 Appendix Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect ( P62 ) and aspect ( P65 ). To project an image on the whole screen, select the most appropriate screen aspect ratio and aspect according to the aspect ratio of the screen and inp...

Relationship between Aspect and Screen Aspect 148 When Projecting an Image from Image Software To project an image such as an image shot by a TV set, commercially available DVD software, or video camcorder (input signal [HDMI (SX80 II)], [VIDEO], [S-VIDEO (SX80 II)], [COMPO-NENT]), select an aspect ...

150 Supported Computer Signal Types This projector supports following signal types.If your computer or AV equipment is compatible with any one of these signal types, the projector's auto PC function selects the input signal type to project an image appropriately. ANALOG RGB *1 is only applicable to ...

151 Appendix Relationship between Screen Size and Projecting Distance * The values in the table above are approximations rounded off. Screen size at 4:3 aspect ratio Type - W x D cm Projecting distance m (feet) Max. zooming Projecting distance m (feet) Min. zooming Screen size at 16:9 aspect ratio W...

152 Glossary * is only applicable to SX80 MarkII An international standard of color repre-sentation (color space) which is applied to general digital cameras, displays and oth-ers. In this projector, if you select [sRGB] in the [Image mode] setting, the projector can project the best-quality image c...

Glossary 154 Number of dots in each resolution If you select SXGA+ (1400 dots x 1050 dots) as the display resolution for the con-necting computer, this projector can project high-resolution images. If your computer does not have the SXGA+ option, select the maximum resolution among the selectable op...

156 Specifications ■ Projector * 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the characteris-tics of the LCD panel. * Using the projector continuously for an extended period of time may accelerate the deterioration of ...

157 Specifications Appendix ■ External View ■ ANALOG PC-1 (SX800), ANALOG PC-2/COMPONENT IN terminal This terminal is used as a computer analog PC input or component input terminal. Use a D-sub computer cable for connection.The terminal specifications for the analog PC input and component input are ...

Specifications 158 ■ Service Port (CONTROL) D-sub 9pin Control Commands Function ASCII Representation Binary Representation Power supply On POWER ON<CR> 50h 4Fh 57h 45h 52h 20h 4Fh 4Eh 0Dh Off POWER OFF<CR> 50h 4Fh 57h 45h 52h 20h 4Fh 46h 46h 0Dh Get GET POWER<CR> 47h 45h 54h 20h 5...

160 Index Numerics 6-axis color adjust (SX80 II) ......... 100 , 155 A Adjustable foot ...................................... 37 Adjusting keystone distortion ................ 60 Adjusting the focus ............................... 59 Adjusting the volume ............................ 71 Air filter .....

163 Options • Replacement lamp Part No.: RS-LP05 • Ceiling-mount hanger Part No.: RS-CL10 • Ceiling-mount pipe (40 cm/16 in to 60 cm/24 in)Part No.: RS-CL08* • Ceiling-mount pipe (60 cm/24 in to 100 cm/40 in)Part No.: RS-CL09* • DVI digital cable Part No.: LV-CA29 * This part is used to hang the pro...

164 Menu Configuration The Display settings menu Aspect DIGITAL PC (SX80 II)/ANALOG PC P79 Auto *4:316:9True size VIDEO 4:3 *16:9Zoom S-VIDEO (SX80 II) Auto *4:3 16:9Zoom HDMI (SX80 II) Auto *4:316:9ZoomTrue size COMPONENT Auto *4:316:9ZoomTrue size USB (SX80 II) Auto Input signal select ANALOG PC P...

165 Menu Configuration The Image adjustment menu Image mode COMMON P93 Standard *PresentationMoviesRGB DIGITAL PC/ANALOG PC/USB P93 Photo (SX80 II) Brightness P94 Contrast P94 Sharpness P95 Gamma P95 Color adjustment DIGITAL PC (SX80 II)/ANALOG PC (SX80 II)/USB (SX80 II) P96 Color level **Color temp...

Menu Configuration 166 The System settings menu The Information menu Auto setup P103 Auto focus (SX80 II) OffOn * Auto keystone OffOn * Auto input OffOn * Auto screen color (SX80 II) Off *On Return Power management mode Off * P103 StandbyExit Direct power on Off * P104 On Beep Off P104 On * Key lock...