Page 4 - II. TABLE OF CONTENTS
II. TABLE OF CONTENTS Part 1: MAINTENANCE 1. MAINTENANCE 1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer 1-2. Customer Maintenance 1-3. Product Life 1-4. Special Tools 1-5. Serial Number Location 2. LIST OF ERROR DISPLAY / INDICATION...
Page 5 - Part 2: TECHNICAL REFERENCE
Part 2: TECHNICAL REFERENCE 1. NEW TECHNOLOGIES 2. CLEANING MODE AND AMOUNT OF INK PURGED 3. PRINT MODE 3-1. Normal Color Printing via Computer 3-2. Normal Grayscale Printing via Computer 3-3. Borderless Printing via Computer 3-4. Manual Duplex Printing via Computer 3-5. Card / Camera Direct Printin...
Page 6 - Consumables by Service Engineer
1. MAINTENANCE 1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer (1) Adjustment *1: The screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit. *2: Automatic print head alignment using the...
Page 40 - MACHINE TRANSPORTATION
4. MACHINE TRANSPORTATION This section describes the procedures for transporting the machine for returning after repair, etc. 1) In the service mode, press the ON/OFF button to finish the mode, and confirm that the paper lifting plate of the sheet feed unit is raised. 2) Keep the print head and ink ...
Page 41 - TECHNICAL REFERENCE
Page 43 - CLEANING MODE AND AMOUNT OF INK PURGED
2. CLEANING MODE AND AMOUNT OF INK PURGED To prevent printing problems due to bubbles, dust, or ink clogging, print head cleaning is performed before the start of printing (when the cleaning flag is on), except in the following cases: - Cleaning on arrival: Performed when the scanning unit (printer ...
Page 48 - FAQ (Problems Specific to the MP510 and Corrective Actions)
4. FAQ (Problems Specific to the MP510 and Corrective Actions) No. * Function Phenomenon Condition Cause Corrective action Possible call or complaint 1 A Installation Ink tank installed in a wrong position The ink tank is installed in a wrong position. Open the scanning unit (printer cover), and ins...
Page 50 - Part; APPENDIX
Page 51 - Link to a PDF file for printing
1. BLOCK DIAGRAM 1-1. PIXMA MP510 Link to a PDF file for printing To the table of contents To the top <Part 3: 1. BLOCK DIAGRAM> 3-1
Page 52 - CONNECTOR LOCATION AND PIN LAYOUT
2. CONNECTOR LOCATION AND PIN LAYOUT 2-1. Logic Board Ass'y J301 (Print Head 1/3 [Carriage Unit]) J302 (Print Head 2/3 [Carriage Unit]) No. Signal name Function Input / Output 1 to 4 VH_GND Head drive ground - 5 to 9 VH Head driver power supply +24V OUT 10 to 14 VH_GND Head drive ground - No. Signal...
Page 64 - PIXMA MP510 SPECIFICATIONS
3. PIXMA MP510 SPECIFICATIONS <Machine> Type Desktop serial color inkjet printer Paper feeding method Auto sheet feed (auto sheet feeder, front feeder) Resolution 4,800 x 1,200dpi (Max.) Throughput (target value) - 4 x 6, borderless printing: Approx. 47 sec. (PP-101 4x6, borderless printing, d...