Canon PIXMA MP150- Manuals

Page 2 - US

(2/24) 1. PRODUCT LIST 1-1. Main Units Product name Product code Sales territories Remarks 0575B002AA US 0575B003AA CA 0575B004AA LAM LTR 0575B005AA EUM 0575B006AA EMB 0575B007AA GB 0575B008AA AU 0575B009AA ASA 0575B010AA CN 0575B011AA TW 0575B012AA KR 0575B013AA HK Canon Ink Jet Printer MP150 0575B...

Page 3 - PRODUCT SPECIFICATIONS

(3/24) 2. PRODUCT SPECIFICATIONS 2-1. Printer Main Unit Specifications Paper feeding method ASF Resolution 4,800 x 1,200 dpi (max.) Printing speed Approx. 55 sec. (PP-101, 4 x 6, borderless printing, default print quality settings)For reference: Draft Standard Black (J/E) 22 ppm 13.4 ppm Color (J/E)...

Page 4 - Magnification

(4/24) (2-1, Printer Main Unit Specifications cont’d) Power supply Input voltage / Frequency AC 100 to 240 V, 50/60Hz During printing Approx. 13 W Power consumption: Stand-by status Approx. 2 W External dimensions - With the paper support extended: Approx. 443 (W) x 436 (D) x 453 (H) mm - With the p...

Page 5 - Life

(5/24) Print layout - 1 photo per page (borderless/with borders) - Index printing Throughput Approx. 69 seconds, with the following conditions and settings: - A photo from a 5 mega-pixel digital camera - PP-101 4” x 6” - ExifPrint/Standard - Process from pressing the printing start button to ejectin...

Page 7 - Operator Call Error (Alarm LED Blinking in Orange)

(7/24) 3. ERROR DISPLAY The errors / alarms occurred in the printer is displayed as follows: 1) In Operator Call Error, the Alarm LED is lit to display an error. (In a service mode, an error is displayed by the Alarm LED blinking.) Service Call Error is displayed by the number of the Alarm LED blink...

Page 10 - Note: The Status Monitor display in the table below is for Windows.; Warning

(9/24) 3-3. Ink Low Warning (Ink low warnings are displayed by the Status Monitor only when the remaining ink level detection is enabled, and no Status Monitor display when disabled.) Note: The Status Monitor display in the table below is for Windows. Warning Display by Status Monitor Ink low warnin...

Page 12 - Service mode operation procedures

(11/24) ＜ Service mode operation procedures ＞ 1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button. 2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button. 3)...

Page 15 - Parts List

(14/24) Parts List Key Part Number Rank Q'ty Description Remark 1 QC1-7720-000 J 1 EMBLEM, PIXMA 2 QM2-2786-000 J 1 DOCUMENT PRESSURE PLATE ASS'Y 3 QC1-7588-000 I 1 SHEET, DOCUMENT PRESSURE 4 QC1-7769-000 J 1 LABEL, PANEL EUM, EMB 5 QC1-7617-000 J 1 COVER, LED CA, LAM LTR 5 QC1-7758-000 J 1 COVER, L...

Page 16 - TROUBLESHOOTING FLOWCHART; Normal

(15/24) 6. TROUBLESHOOTING FLOWCHART 6-1. Printer Main Unit Troubleshooting Flowchart (how to confirm printer operation at refurbishment) <Note for normal printer refurbishment> At end of refurbishment, set the printer to the default shipment conditions (with the paper lifting plate in the rai...

Page 18 - SPECIAL NOTES ON SERVICING; ) Make marks under red screws located at both sides of the chassis.

(17/24) 7. SPECIAL NOTES ON SERVICING 7-1. Notes on the Waste Ink Absorber (for absorbing waste ink when doing borderless printing) Replacement. After the waste ink absorber shown below was replaced, check if head-to-paper distance between the chassis and platen is correct. Because the chassis and p...

Page 19 - PRODUCT TECHNICAL INFORMATION

(18/24) 8. PRODUCT TECHNICAL INFORMATION 8-1. FAQ (Problems specific to the iP150, and their corrective actions) No. * Function Phenomenon Possible Call / Claim Corrective action Cause 1 A Carriage error (Alarm and Power LEDs blink alternately 2 times). - The LEDs blink alternately in orange and gre...

Page 21 - (2) Remaining ink level detection function

(20/24) 8-2. Major Functions (1) Quiet mode The printer has a quiet mode function. Compared with the normal mode, Acoustic noise level: HS normal approx. 55.0 dB, Quiet approx. 46.9 dB Audible overtone level: Sound quality changes, and sound becomes quieter. Print speed: Slows. <Possible problems...

Page 23 - APPENDIX 1: SHIPMENT INSPECTION PATTERN 1; LEDlight control (Print result of LED TIME)

(22/24) APPENDIX 1: SHIPMENT INSPECTION PATTERN 1 <EEPROM information contents> On the service test print(sample below), confirm the EEPROM information as shown below. (The information Is given in the upper portion of the printout.) MPxxx xxx M=Vx.xx Dd=xxx.x Ds=xxx.x xx xx xx xx USB(XXXXXX) L...

Page 24 - APPENDIX 2: EEPROM INFORMATION PRINT

(23/24) APPENDIX 2: EEPROM INFORMATION PRINT <How to read EEPROM information print> Print sample: i MP150 US V1.00 IF(USB2=1) D=008.0 Ds 000.0 ST=2005/06/25-16:41 ER(ER0=1000 ER1=5100) LPT=2006/07/04-10:25 PC(M=000 R=000 T=011 D=000 C=000) CLT(2005/06/30-11:34) CT(BK_ST=002 BK_HC=002 CL_ST=000...