Canon MX420- Manuals

Preparing to Connect My MultifunctionTo My Network Be sure to prepare an access point. Important Information You Need Before Adding Your Multifunction The following information is required to connect to your access point or router. • Access Point Name/Network Name: Also referred to as SSID . A name ...

Adding Your Multifunction to Your Network Adding Your Multifunction to Your Network 6 Step One Press the Setup button (A) Step Two Select Wireless LAN setup , and then press the OK button.

Adding Your Multifunction to Your Network 7 Step Four Select Easy setup , and then press the OK button. Step Three Select Yes, then press the OK button. When wireless connection is enabled, the Wi-Fi lamp (D) lights blue.

Step Five Select the access point name, then press the OK button. NOTE : If you are living in an apartment, nearby access points in use may be detected. Step Six When one of the following screens is displayed, enter the network key using the Numeric buttons (E), then press the OK button. If the foll...

Step Eight When the connected to the access point screen appears, press the OK button. The Setup menu screen returns. NOTE: If Failed to connect to the access point . appears, press the OK button, make sure that the network key is correct, then enter it again. If a connection still cannot be establi...

Installing the Drivers & Software To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or ...

Step Four Click Easy Install . Click Install . The drivers, application software, and on-screen manuals are installed all together. Step Three Enter your administrator name and password. Click OK . If you do not know your administrator name or password, click Help , then follow the on-screen instruc...

Step Six Select Use the printer with wireless LAN connection , then click Next . Follow any on-screen instructions to proceed with the software installation. Step Five Click Install * Applications may vary by model 12 Installing the Drivers & Software

Step Eight When the Create an Alias on Desktop screen appears, select Agree if you want an alias of the On-Screen manual to be placed on the desktop , otherwise select Do not Agree, then click Next Step Seven Read the License Agreement screen carefully and click Yes . 13 Installing the Drivers &...

Step Eleven When the Printer Detection screen appears, click Next Step Twelve Make sure the machine is turned on, then click OK . 15 Installing the Drivers & Software

16 Installing the Drivers & Software Step Thirteen On the Canon IJ Network Tool screen, select MX420 series in Printers and click Next .

Step One When the Register Printer and Scanner screen appears, click Register Printer. Registering the Printer & Scanner This section describes how to register the machine on a Macintosh computer. Registering the Printer & Scanner 17 Proceed to the section that relates to your operating syst...

Step Two 2-A 1. Select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number. MX420 series shown in example, below 2. Go to Step Three, page 20. *The alphanumeric characters after Canon xxxx series is the machine's Bonjour service name or MAC address Step Two 2...

Step Two 2-B 3. Select Canon IJ Network in the pop-up menu, select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number. MX410 series shown in example, below Step Two 2-B 2. Click More Printers in the Printer Browser window. 19 Registering the Printer & Sc...

Step Three When the Register Printer and Scanner screen appears, click Register Scanner . Step Two 2-B 4. Make sure that the Canon MXxxx series is added to the list of printers. *xxx refers to the model number. MX410 series shown in above example. 20 Registering the Printer & Scanner

Step Five Click Next on the Register Printer and Scanner screen. Step Four Select Canon MX410 series on the Canon IJ Network Scanner Selector EX screen, then click OK 21 Registering the Printer & Scanner

Step Seven Click Next on the Register Printer and Scanner screen. Step Six Click Next on the Print Head Alignment Recommended screen. 22 Registering the Printer & Scanner

If the Extended Survey Program screen appears: If you can agree to Extended Survey Program, click Agree. If you click Do not agree , the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.). Step Eight If the User Registration screen appears, read the i...

Step Nine Click Exit. Setup is complete *It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time. 24 Registering the Printer & Scanner

Preparing to Connect My MultifunctionTo My Network Be sure to prepare an access point. Important Information You Need Before Adding Your Multifunction The following information is required to connect to your access point or router. • Access Point Name/Network Name: Also referred to as SSID . A name ...

Adding Your Multifunction to Your Network Adding Your Multifunction to Your Network 6 Step One Press the Setup button (A) Step Two Select Wireless LAN setup , and then press the OK button.

Adding Your Multifunction to Your Network 7 Step Four Select Easy setup , and then press the OK button. Step Three Select Yes, then press the OK button. When wireless connection is enabled, the Wi-Fi lamp (D) lights blue.

Step Five Select the access point name, then press the OK button. NOTE : If you are living in an apartment, nearby access points in use may be detected. Step Six When one of the following screens is displayed, enter the network key using the Numeric buttons (E), then press the OK button. If the foll...

Step Eight When the connected to the access point screen appears, press the OK button. The Setup menu screen returns. NOTE: If Failed to connect to the access point . appears, press the OK button, make sure that the network key is correct, then enter it again. If a connection still cannot be establi...

Installing the Drivers & Software To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or ...

Step Four Click Easy Install . Click Install . The drivers, application software, and on-screen manuals are installed all together. Step Three Enter your administrator name and password. Click OK . If you do not know your administrator name or password, click Help , then follow the on-screen instruc...

Step Six Select Use the printer with wireless LAN connection , then click Next . Follow any on-screen instructions to proceed with the software installation. Step Five Click Install * Applications may vary by model 12 Installing the Drivers & Software

Step Eight When the Create an Alias on Desktop screen appears, select Agree if you want an alias of the On-Screen manual to be placed on the desktop , otherwise select Do not Agree, then click Next Step Seven Read the License Agreement screen carefully and click Yes . 13 Installing the Drivers &...

Step Eleven When the Printer Detection screen appears, click Next Step Twelve Make sure the machine is turned on, then click OK . 15 Installing the Drivers & Software

16 Installing the Drivers & Software Step Thirteen On the Canon IJ Network Tool screen, select MX420 series in Printers and click Next .

Step One When the Register Printer and Scanner screen appears, click Register Printer. Registering the Printer & Scanner This section describes how to register the machine on a Macintosh computer. Registering the Printer & Scanner 17 Proceed to the section that relates to your operating syst...

Step Two 2-A 1. Select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number. MX420 series shown in example, below 2. Go to Step Three, page 20. *The alphanumeric characters after Canon xxxx series is the machine's Bonjour service name or MAC address Step Two 2...

Step Two 2-B 3. Select Canon IJ Network in the pop-up menu, select Canon MXxxx series in the list of printers, then click Add . *xxx refers to the model number. MX410 series shown in example, below Step Two 2-B 2. Click More Printers in the Printer Browser window. 19 Registering the Printer & Sc...

Step Three When the Register Printer and Scanner screen appears, click Register Scanner . Step Two 2-B 4. Make sure that the Canon MXxxx series is added to the list of printers. *xxx refers to the model number. MX410 series shown in above example. 20 Registering the Printer & Scanner

Step Five Click Next on the Register Printer and Scanner screen. Step Four Select Canon MX410 series on the Canon IJ Network Scanner Selector EX screen, then click OK 21 Registering the Printer & Scanner

Step Seven Click Next on the Register Printer and Scanner screen. Step Six Click Next on the Print Head Alignment Recommended screen. 22 Registering the Printer & Scanner

If the Extended Survey Program screen appears: If you can agree to Extended Survey Program, click Agree. If you click Do not agree , the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.). Step Eight If the User Registration screen appears, read the i...

Step Nine Click Exit. Setup is complete *It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time. 24 Registering the Printer & Scanner