Canon LV-X7 - Manuals - manualsarea.com

Page 2 - Important Information; Safety Cautions; Precautions; TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.; CAUTION; Do not put the projector on its side when the lamp is turned on.; WARNING TO CALIFORNIA RESIDENTS:; WASH HANDS AFTER HANDLING.

i Important Information Safety Cautions Precautions Please read this manual carefully before using your Canon LV-7265/LV-7260/LV-X7 projector and keep the manual handy for future reference. Your serial number is located on the bottom of your projector. Record it here: CAUTION To turn off main power,...

Page 3 - ii; This Class B digital apparatus complies with Canadian ICES-003.; Réglementation canadienne sur les intérferences radio

ii Important Information Federal Communication Commission Notice Multimedia Projector, Model : LV-7265, LV-7260 and LV-X7This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device m...

Page 4 - iii; • A lamp gradually becomes darker with time of use.; IF A LAMP EXPLODES; • To replace the lamp, follow all instructions provided on page; NOTE FOR CUSTOMERS IN THE US; LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECY-

iii Important Information LAMP HANDLINGPRECAUTIONS This projector uses a high-pressure mercury lamp which must be handled carefully and properly as mentioned below. • A lamp may explode with a loud sound or burn out due to a shock, scratch, or expiration of lifetime. • The lamp life may differ from ...

Page 5 - iv

iv Important Information 10˚ For UK only: In UK, a BS approved power cord with moulded plug has a Black (fi ve Amps) fuse installed for use with this equipment. If a power cord is not supplied with this equipment please contact your supplier. Important Safeguards These safety instructions are to ens...

Page 7 - • Handle the remote control carefully.

vi Important Information CARRYING/TRANSPORTING THE PROJECTOR This projector is a precision machine. Do not give a strong shock to the projector or turn it down.Thoroughly read "Use Caution When Carrying or Transporting the Projector" below and install the lens cap before car-rying the projec...

Page 8 - vii; Table of Contents

vii Table of Contents Important Information ......................................................................................... i 1. Introduction ........................................................................................................ 1 ❶ What's in the Box? .......................

Page 9 - viii; Convenient Features

viii Table of Contents 4. Convenient Features ................................................................................... 33 ❶ Turning Off the Image and Sound ............................................................................... 33 ❷ Freezing a Picture ................................

Page 10 - Important

1 ❶ What's in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer.Please save the original box and packing materials if you ever need to ship your projector. ME NU BAC K KEY STON E W AR NIN G P OW ER AUTO PC INP UT LA M P - + VO L VOL Projector Lens...

Page 11 - Introduction to the Projector; Congratulations on Your Purchase of The Projector

2 1. Introduction ❷ Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Congratulations on Your Purchase of The Projector The LV-7265/LV-7260/LV-X7 is one of the very best projectors available today. The projector enables you to pr...

Page 12 - About this user's manual; of Microsoft Corporation.

3 About this user's manual The fastest way to get started is to take your time and do everything right the fi rst time. Take a few minutes now to review the user's manual. This may save you time later on. At the beginning of each section of the manual you'll fi nd an overview. If the section doesn't...

Page 13 - Part Names of the Projector; Rear

4 ❸ Part Names of the Projector ME NU BA CK KEYSTONE W ARN ING P OW ER AU TO PC INPUT LAM P - + VO L VOL M EN U BAC K KEYS TONE WA RNIN G POW ER AUTO PC INPUT VO L - VOL + LAMP AU DIO IN AUDIO OUT ANALOG IN-1 DIGIT AL IN / ANALOG IN-2 S-VIDEO IN VIDEO IN SER VICE POR T R L AUDIO IN Zoom Lever (See p...

Page 14 - Bottom; To turn the logo upside down, follow the steps below.; The other end will pop up slightly.

5 1. Introduction Bottom Adjustable Tilt Foot(See page 26 ) Adjustable Tilt Foot Lock Button(See page 26 ) Lamp Cover(See page 57 ) Rear Foot (Left / Right) HINT: The Canon logo is on the panel of the projector cabinet . When projecting an image with the projector hung from the ceil- ing, turn the C...

Page 15 - Top Features; Selecting from INPUT List; Button

6 1. Introduction Top Features MENU BACK KEYSTONE WARNING POWER AUTO PC INPUT VOL - VOL + LAMP 3 4 1 5 8 9 2 10 6 7 1. POWER Button ( ) Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode.To turn on the projector, press and hold this butt...

Page 16 - Terminal Panel Features

7 1. Introduction AUDIO IN AUDIO OUT S-VIDEO IN VIDEO IN L AUDIO IN R SERVICE PORT ANALOG IN-1 DIGITAL IN / ANALOG IN-2 9 7 3 1 2 8 4 5 6 Terminal Panel Features 1. Computer 1 Input Connector [ANALOG IN-1] (Computer Input Connector [ANALOG IN] on LV-7260/LV-X7) (Mini D-Sub 15 Pin) Connect your compu...

Page 17 - Part Names of the Remote Control; Infrared Transmitter

8 1. Introduction ❹ Part Names of the Remote Control 1. Infrared Transmitter Direct the remote control toward the remote sensor on the projector cabinet. 2. POWER Button When the main power is on, you can use this button to turn your projector on. NOTE: To turn on the projector, press and hold the P...

Page 19 - angle of the remote sensor on the projector cabinet.; Horizontal range

10 1. Introduction Remote Control Precautions • Handle the remote control carefully.• If the remote control gets wet, wipe it dry immediately.• Avoid excessive heat and humidity.• Do not heat, take apart, or throw batteries into fi re.• Ensure that you have the batteries' polarity (+/-) aligned corr...

Page 20 - Installation and Connections; Set up a screen and the projector. See page

11 This section describes how to set up your projector and how to connect video and audio sources. 2. Installation and Connections Your projector is simple to set up and use. But before you get started, you must fi rst: ① Set up a screen and the projector. See page 12 , 13 . ② Connect your computer ...

Page 21 - Setting Up the Screen and the Projector; Throw Distance and Screen Size; Screen

12 2. Installation and Connections ❶ Setting Up the Screen and the Projector Selecting a Location (LV-7265) The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 25" measured diagonally when the projector is roughly 1.1 m ...

Page 22 - depending on the type of the projected image.

13 2. Installation and Connections Selecting a Location (LV-7260/LV-X7) The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 25" measured diagonally when the projector is roughly 1.1 m (3.7’) from the wall or screen. The ...

Page 23 - WARNING; • Installing your projector on the ceiling must be done; Refl ecting the Image; buttons on your projec-

14 2. Installation and Connections WARNING • Installing your projector on the ceiling must be done by a qualified technician. Contact your dealer for more information. • Do not attempt to install the projector yourself.• Only use your projector on a solid, level surface. If the projector falls to th...

Page 24 - Making Connections; Enabling the computer’s external display

15 2. Installation and Connections ❷ Making Connections NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC.In most cases the output signal from the notebook PC is not turned o...

Page 28 - NOTE: Daisy chain connection is not possible.

19 2. Installation and Connections Connecting an External Monitor AUDIO IN AUDIO OUT S-VIDEO IN VIDEO IN L AUDIO IN R SERVICE PORT ANALOG IN-1 DIGITAL IN / ANALOG IN-2 ANALOG IN 1 AUDIO IN S-VIDEO IN VIDEO IN L AUDIO IN R SERVICE PORT ANALOG IN You can connect a separate, external monitor to your pr...

Page 29 - Use audio equipment for stereo sound.

20 AUDIO IN AUDIO OUT S-VIDEO IN VIDEO IN L AUDIO IN R SERVICE PORT ANALOG IN-1 DIGITAL IN / ANALOG IN-2 AUDIO IN L R AUDIO OUT L R Component Y Cb Cr ANALOG IN-1 AUDIO IN 2. Installation and Connections A component signal will be automatically displayed. If not, from the menu, select [Setup] → [Inpu...

Page 30 - Connecting Your VCR or Laser Disc Player

21 2. Installation and Connections AUDIO IN L R AUDIO OUT L R VIDEO OUT S-VIDEO VIDEO AUDIO IN AUDIO OUT S-VIDEO IN VIDEO IN L AUDIO IN R SERVICE PORT ANALOG IN-1 DIGITAL IN / ANALOG IN-2 VIDEO IN AUDIO IN S-VIDEO IN Connecting Your VCR or Laser Disc Player S-Video cable (not supplied) Video cable (...

Page 31 - Connecting the Supplied Power Cord

22 2. Installation and Connections M EN U BAC K KEYST ON E WA RNIN G P OWE R AUTO PC INPUT VOL - VOL + LAM P AUDIO IN AUDIO OUT ANALOG IN-1 DIGIT AL IN / ANALOG IN-2 S-VIDEO IN VIDEO IN SER VICE PO RT R L AU DIO IN Connecting the Supplied Power Cord Connect the supplied power cord to the projector.F...

Page 32 - Turning on the Projector; sition. Failure to do so may cause damage to the projector.; See page

23 3. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. ❶ Turning on the Projector NOTE:• The projector has two power switches: a main power switch and a POWER button.• When plugging in or unplugging the supplied power...

Page 33 - Note on Startup screen (Menu Language Select screen); To select a menu language, follow these steps:; or

24 VOL - VOL + MENU BACK KEYSTONE 3. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you fi rst turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 21 menu languages. To select a menu language,...

Page 34 - Selecting a Source; Selecting the computer or video source; Video; Selecting Default Source; Select a source as the default source, and

25 3. Projecting an Image (Basic Operation) ❷ Selecting a Source Selecting the computer or video source WER AUTO PC INPUT VOL - POWER BACK INPUT IMAGE ASPECT INFO. MENU NO SHOW AUTO PC NOTE: Turn on the computer or video source equipment connected to the pro-jector. Selecting from INPUT List Press a...

Page 35 - Adjusting the Picture Size and Position; Adjust the Tilt Foot; Lift the front edge of the projector.; Lower the front of the projector to the desired height.

26 3. Projecting an Image (Basic Operation) Place your projector on a fl at level surface and ensure that the projector is square to the screen. Lift the front edge of the projector to center the image vertically.• If the projected image does not appear square to the screen then use the Keystone fea...

Page 37 - Correcting Keystone Distortion; The keystone bar will be displayed.; Adjusting with the Remote Control; The menu will be displayed.

28 3. Projecting an Image (Basic Operation) ❹ Correcting Keystone Distortion Correcting Keystone Distortion If the screen is tilted vertically, keystone distortion becomes large. Proceed with the followingsteps to correct keystone distortion NOTE: The Keystone correction can cause an image to be sli...

Page 39 - Automatically Optimizing on RGB Image; Adjusting the Image Using Auto PC adjustment; Tracking manually. See page; Turning Up or Down Volume; Sound level from the speaker can be adjusted.

30 3. Projecting an Image (Basic Operation) ❺ Automatically Optimizing on RGB Image Adjusting the Image Using Auto PC adjustment Optimizing an RGB image automatically.Press the AUTO PC button to optimize an RGB image automatically. [Poor picture] [Normal picture] AUTO PC OWER AUTO PC INPUT VOL - POW...

Page 40 - Turning off the Projector; To turn off the projector:; Press the POWER button on the projector cabinet or

31 ❼ Turning off the Projector To turn off the projector: 3. Projecting an Image (Basic Operation) WARNING POWER LAMP POWER INPUT IMAGE ASPECT INFO. MENU NO SHOW AUTO PC 1. Press the POWER button on the projector cabinet or the remote control. The “Push POWER button again to turn off power.” message...

Page 41 - After Use; Preparation: Make sure that the projector is turned off.; Retract adjustable tilt feet if extended.

32 ❽ After Use Preparation: Make sure that the projector is turned off. 1. Unplug the power cord. 2. Disconnect any other cables. 3. Retract adjustable tilt feet if extended. 4. Cover the lens with the lens cap. 5. Put the projector and its accessories in the supplied soft case. Place the projector ...

Page 42 - Turning off the Image and Sound; Freezing a Picture; You can enlarge the picture up to 400 percent.

33 POWER BACK INPUT IMAGE ASPECT INFO. MENU NO SHOW AUTO PC 4. Convenient Features ❶ Turning off the Image and Sound Press the NO SHOW button to turn off the image and sound for a short period of time. Press again to restore the image and sound. POWER BACK INPUT IMAGE ASPECT INFO. MENU NO SHOW AUTO ...

Page 43 - Using the Remote Mouse Receiver; Connecting the remote mouse receiver to your computer; When operating a computer via the remote mouse receiver; When connecting using the USB terminal

34 4. Convenient Features ❹ Using the Remote Mouse Receiver (LV-7265/LV-7260) The remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations. Connecting the remote mouse re...

Page 44 - You can operate your computer's mouse from the remote control.; About Drag Mode; NOTE: When you operate the computer using the SELECT

35 4. Convenient Features Operating your computer’s mouse from the remote control You can operate your computer's mouse from the remote control. PAGE ▲ / ▼ Button..................scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer. / Mouse ...

Page 45 - Preventing the Unauthorized Use of the Projector; To enable the Password function:

36 4. Convenient Features ❺ Preventing the Unauthorized Use of the Projector A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a password is set, turning on the projector will display the password input screen. Unless the correct password is ent...

Page 46 - To turn on the projector when Password is enabled:; The Password screen will be displayed.; To disable the Password function:

37 The [Confirm password] screen will be displayed. NOTE: Do not forget your password. If you forget your password, contact your dealer. 7. Type in the same combination of SELECT button and press the OK button. The confirmation screen will be displayed. 8. Select [Yes] and press the OK button. The P...

Page 48 - Using the Menus; Press the SELECT

39 ❶ Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or projector cabinet to display the Menu. 5. Using On-Screen Menu POWER BACK INPUT IMAGE ASPECT INFO. MENU NO SHOW AUTO PC 2. ...

Page 50 - Menu Elements

41 5. Using On-Screen Menu ❷ Menu Elements Highlight Title Slide bar Source Solid triangle Radio button Thermometer symbol Key symbol Menu windows or dialog boxes typically have the following elements: Title .......................................... Indicates the menu title. Highlight ................

Page 51 - List of Menu Items; Image adjustment; Some menu items are not available depending on the input source.

42 5. Using On-Screen Menu ❸ List of Menu Items Image adjustment Default Item Image mode 1: Standard, 2: Presentation, 3: Cinema, 4: Video, 5: sRGB Detail settings General Reference Standard, Presentation, Cinema, Video, sRGB Gamma Dynamic, Natural, Black detail Color temperature XLow, Low, Mid, Hig...

Page 53 - Adjusting Color Temperature [Color temperature]

44 5. Using On-Screen Menu ❹ Menu Descriptions & Functions [Image adjustment] [Image mode] When selecting user adjustable [Image mode], the submenu will be displayed.You can customize each gamma or color. To do so, fi rst select [Image mode] and press the OK button, then pro-ceed using the follo...

Page 54 - only valid for Video and Component inputs (not valid for RGB).; Reset

45 5. Using On-Screen Menu Normal Standard 4:3 Aspect When 16:9 is selected from the source (i.e. DVD player), the following selections will display: Normal 16:9 image displayed in 4:3 mode Wide zoom Cinema True size Left and right stretched Left and right stretched Wide zoom Cinema Left and right s...

Page 56 - You can correct vertical distortion manually.; Saving Vertical Keystone Correction [Keystone save]; This option enables you to save your current keystone settings.; Selecting Wall Color Correction Mode [Screen color]

47 5. Using On-Screen Menu ❻ Menu Descriptions & Functions [Setup] [General] Enabling Auto Keystone [Auto keystone] (LV-7265 only) This feature allows the projector to detect its tilt and correct vertical distortion automatically.To turn off the Auto Keystone feature, select [Off]. Correcting Ve...

Page 57 - Enabling Key Sound and Error Sound [Beep]

48 LAMP LAMP 5. Using On-Screen Menu Selecting Lamp Mode [Lamp mode] This feature enables you to select two brightness modes of the lamp: Normal and Quiet modes. The lamp life can be extended by using the Quiet mode. Lamp Mode Normal Mode Quiet Mode Description This is the default set ting (10 0% Br...

Page 58 - Selecting Communication Speed [Communication speed]; will change the setting to enable.

49 5. Using On-Screen Menu [Installation] Selecting Projector Orientation [Image fl ip H/ V] This sets your image for your type of projection application. The options are:front projection, rear projection, ceiling mounted projection and rear ceiling mounted projection. Selecting Communication Speed ...

Page 59 - page; Selecting Menu Display Time [Menu display time]; You can manually optimize the RGB image.; Enabling Direct Power ON [Direct power on]

50 5. Using On-Screen Menu Enabling Password [Password] This feature turns on or off the Password function.Unless the correct password is entered, the projector cannot project an image. ( → page 36 ) Selecting Menu Color [Menu color select] You can choose between two color modes for menu color: colo...

Page 60 - Selecting Default Source [Default source select]

51 5. Using On-Screen Menu Enabling Fan Speed Mode [Fan mode] This option allows you to select two modes for fan speed: Auto mode and High speed mode. Auto ....................... The built-in fans automatically run at a variable speed according to the internal temperature. High .......................

Page 61 - Selecting Signal Format

52 [Input signal select] Selecting Signal Format [Computer]*, [Computer 1]*, [Computer 2 (Analog)]*Allows you to choose [Computer]*, [Computer 1]* or [Computer 2 (Analog)]* for an RGB source such as a comput-er, or [COMPONENT] for a component video source such as a DVD player. Normally select [RGB/C...

Page 64 - Cleaning or Replacing the Filter; • Only clean the outside of the fi lter cover with a vacuum cleaner.; See also page

55 6. Maintenance MENU BACK KEYSTO NE WA RNING P OW ER AUTO PC INPUT LA MP - + VO L VOL This section describes the simple maintenance procedures you should follow to clean the fi lter and replace the lamp. ❶ Cleaning or Replacing the Filter The air-fi lter sponge keeps dust and dirt from getting ins...

Page 65 - Cleaning the Cabinet and the Lens; Turn off the projector before cleaning.

56 6. Maintenance 3. Reinstall the new filter cover. NOTE: Do not wash the fi lter with soap and water. Soap and water will damage the fi lter membrane. Before replacing the fi lter, remove dust and dirt from the projector cabinet. Keep out dust and dirt during fi lter replacement. NOTE: When you re...

Page 66 - Replacing the Lamp; “Replace with the new lamp.”

57 6. Maintenance ❸ Replacing the Lamp After your lamp has been operating for 2000* 1 hours (up to 3000* 1 hours in Quiet mode) or longer, the LAMP indi- cator in the cabinet will blink red and the message “Replace with the new lamp.” * 2 will appear. Even though the lamp may still be working, repla...

Page 67 - NOTE: Do not remove any screws except these two screws.

58 6. Maintenance Interlock 3. Remove the lamp. (1) Loosen the two screws securing the lamp until the phillips screwdriver goes into a freewheeling condition. The two screws are not removable. NOTE: Do not remove any screws except these two screws. (2) Remove the lamp by holding it. NOTE: There is a...

Page 68 - Insert a new lamp until the lamp is plugged into the socket.; Secure it in place with the two screws.

59 6. Maintenance 6. Connect the supplied power cord, turn on the Main Power switch and turn on the projector. 7. Finally, select the menu → [Reset] → [Lamp counter] to reset the lamp usage hours. NOTE: When the lamp exceeds 2100* hours (up to 3100* hours in Quiet mode) of service, the projector can...

Page 69 - Troubleshooting; Indicator Messages; POWER Indicator; Over-Temperature Protection

60 7. Appendix ❶ Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. WARNING Indicator LAMP Indicator Indicator Messages POWER Indicator MENU BACK KEYSTONE WARNING POWER AUTO PC INPUT VOL - VOL + LAMP WARNING Indicator POWER Indicator L ...

Page 70 - Common Problems & Solutions; Problem; For more information contact your dealer.

61 7. Appendix Common Problems & Solutions ( → "Power/Status/Lamp Indicator" on page 60 .) Problem Check These Items Does not turn on • Check that the power cord is plugged in and that the power button on the projector cabinet or the remote control is on. See pages 22 and 23 . • Ensure t...

Page 71 - If there is no picture, or the picture is not displayed correctly.

62 7. Appendix If there is no picture, or the picture is not displayed correctly. • Power on process for the projector and the PC. Be sure to connect the VGA cable between the projector and the computer before turning on the computer. There are some notebook PCs, which do not output signal unless th...

Page 72 - Specifi cations; Model Number; Optical

63 7. Appendix ❷ Specifi cations This section provides technical information about the projector's performance. Model Number LV-7265/LV-7260/LV-X7 Optical LCD Panel LV-7265: 0.63" p-Si TFT active-matrix with Micro Lens Array (Aspect 4:3) LV-7260/LV-X7: 0.6" p-Si TFT active-matrix with Micro ...

Page 73 - Mechanical; The specifi cations are subject to change without notice.

64 7. Appendix External Control RS232, IR Sync Compatibility Separate Sync / Composite Sync / Sync on Green / Sync on Video Built-in Speaker LV-7265: 5W (monaural) LV-7260/LV-X7: 1W (monaural) Power Requirement 100 - 240V AC, 50 / 60 Hz Input Current LV-7265/LV-7260: 3.1 - 1.3A LV-X7: 2.4 - 1.0A Pow...

Page 74 - Cabinet Dimensions

65 7. Appendix PUSH MENU BACK KEYSTONE WARNING POWER AUTO PC INPUT VOL - VOL + LAMP AUDIO IN AUDIO OUT S-VIDEO IN VIDEO IN L AUDIO IN R SERVICE PORT ANALOG IN-1 DIGITAL IN / ANALOG IN-2 S-VIDEO IN VIDEO IN L AUDIO IN R SERVICE PORT ANALOG IN ❸ Cabinet Dimensions Lens center Lens center Unit: mm (inc...

Page 75 - Mini D-Sub 15 Pin Connector; Pin Assignments of D-Sub ANALOG Input Connector

66 Mini D-Sub 15 Pin Connector ❹ Pin Assignments of D-Sub ANALOG Input Connector Signal LevelVideo signal : 0.7Vp-p (Analog)Sync signal : TTL level 1 11 15 12 14 13 6 5 4 3 2 10 7 9 8 7. Appendix * Only ANALOG-1 input connector supported on LV-7265. Pin No. RGB Signal (Analog) YCbCr Signal 1 Red Cr ...

Page 76 - Compatible Input Signal List

67 7. Appendix ❺ Compatible Input Signal List Horizontal: 15KHz to 100KHz (RGB: 24KHz or over)Vertical: 50Hz to 120Hz Signal Resolution Frequency H. Refresh Rate ( Dots ) ( kHz ) ( Hz ) NTSC – 15.73 59.94 PAL – 15.63 50.00 PAL60 – 15.73 60.00 SECAM – 15.63 50.00 D VESA 640 480 31.47 59.94 D IBM 640 ...

Page 77 - Relationship between Screen Size and Projection distance

68 7. Appendix 25" 30" 40" 50" 60" 70" 80" 90" 100" 110" 120" 130" 140" 150" 160" 170" 176" 180" 190" 200" 210" 220" 230" 240" 250" 260" 270" 280" 290" 300" 51 61 81 102 122 142 16...

Page 79 - PC Control Codes and Cable Connection; PC Control Codes; Communication Protocol

70 7. Appendix ❼ PC Control Codes and Cable Connection PC Control Codes Cable Connection Communication Protocol Baud rate 19200 bps Data length 8 bits Parit y No parit y Stop bit One bit Communications procedure ...........Full duplex NOTE: Depending on the equipment, a lower baud rate may be recomm...

Page 80 - Troubleshooting Check List; Frequency of occurrence; always; Power

71 7. Appendix ❽ Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed, you may also refer to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem more effi ciently.* ...

Page 81 - Installation environment

72 7. Appendix In the space below please describe your problem in detail. Information on application and environment where your projector is used Projector Model number: Serial No.: Date of purchase: Lamp operating time (hours): Lamp Mode: Normal Quiet Information on input signal: Horizontal sync fr...

Page 82 - 390 Dixie Road Mississauga, Ontario L5T 1P7 Canada; CANON DEUTSCHLAND GmbH; Europark Fichtenhain A 10, 47807 Krefeld, Germany; CANON GmbH

CANON INC. 30- 2, Shimomaruko 3- chome, Ohta- ku, Tokyo 146- 8501, Japan CANON U. S. A., INC. One Canon Plaza, Lake Success, NY 11042, U. S. A. CANON CANADA, INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LATIN AMERICA, INC. 703 Waterford Way Suite 400 Miami, Florida 33126 U. S. A. C...