Canon LV-8235 UST- Manuals
Canon LV-8235 UST– User Manual, Manual in PDF format online.
Manuals:
User Manual Canon LV-8235 UST
Summary
LV-8235 UST Basic Serial Command Specifications -ii- Table of Contents 1. Overview ............................................................................................. 1 2. Serial Interface Specifications ........................................................... 2 2.1. Transfer Specificat...
LV-8235 UST Basic Serial Command Specifications -1- 1. Overview 1.1. These specifications define projector control commands for LV-8235 UST. 1.2. The projector control commands are used to remotely control a projector through RS-232C from a computer.
LV-8235 UST Basic Serial Command Specifications -2- 2. Serial Interface Specifications 2.1. Transfer Specifications Item Specifications Synchronous system Asynchronous Transmission Speed 9600 / 19200 Data Length 8 bit Parity N/A Stop Bit 1 Flow Control N/A 1) Transmission speed: initial setting valu...
LV-8235 UST Basic Serial Command Specifications -3- 3. Notes for Communication 1. The projector control command is defined as one command/one line that starts with “C” and ends with carriage return (0x0D). 2. There are two types of Commands: Functional Execution Commands and Status Read Commands. Ex...
LV-8235 UST Basic Serial Command Specifications -4- 4. Functional Execution Command Table Command Item Command Item C00 POWER ON C20 BRIGHTNESS + C01 POWER OFF (Quick Power OFF) C21 BRIGHTNESS - C02 POWER OFF C22 ――― C03 ――― C23 ――― C04 HDMI C24 ――― C05 Computer 1 C25 ――― C06 Computer 2 C26 ――― C07 ...
LV-8235 UST Basic Serial Command Specifications -6- 5. Status Read Command Table Command Item Memo CR0 Status Read CR1 Input Mode Read CR2 ――― CR3 (Corresponding) Lamp Time Read CR4 Setting Read CR5 ――― CR6 Temp Read CR7 Lamp Mode Read ――― means no function.
LV-8235 UST Basic Serial Command Specifications -7- 6. Functional Execution Command 6.1. Format 6.1.1 PC issues a command in format as below. “C” COMMAND [CR] Command: two characters (See Basic Functional Execution Command Table) A projector changes received data to decode and returns a ...
LV-8235 UST Basic Serial Command Specifications -14- 6.33. IMAGE (Toggle) Command Command “C27”[CR] Detail Switch Image Setting status. This command works the same as “IMAGE” button of the remote control. Response Acceptable [ACK] [CR] Unacceptable “ ? ”[CR] 6.34. Direct on Setting Command Command “...
LV-8235 UST Basic Serial Command Specifications -17- 6.51. Computer 1 Analog RGB Command Command “C50” [CR] Detail Select ANALOG PC in Computer 1 input. Although projector returns “OK”, Auto input is not executed with this command while Auto input is set to On1/On2. Response Acceptable [ACK] [CR] Un...
LV-8235 UST Basic Serial Command Specifications -19- 7. Status Read Command 7.1. Format 7.1.1. PC issues commands in format as below; “CR” Command [CR] Command : 1 character(See Basic Status Read Command Table) 7.1.2. When a projector receives the appropriate command, it returns a character line as ...
Manual Canon LV-8235 UST
Canon Manuals
-
Canon 6130280
User Manual
-
Canon imageCLASS MF284dw
User Manual
-
Canon imageCLASS MF289dw
User Manual
-
Canon imageCLASS LBP172dw
User Manual
-
Canon 248
User Manual
-
Canon 323
User Manual
-
Canon 323
Installation Manual
-
Canon 323
Manual
-
Canon 250
User Manual
-
Canon 251
User Manual
-
Canon 251
Manual
-
Canon 251
Troubleshooting Guide
-
Canon 6710C002
User Manual
-
Canon K10605
User Manual
-
Canon K10613
User Manual
-
Canon K10608
User Manual
-
Canon K10609
User Manual
-
Canon imageRUNNER C3326i
User Manual
-
Canon imageCLASS MF465dw
User Manual
-
Canon K10617
User Manual