Canon LV-7590- Manuals

Page 2 - Features and Design

2 This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid cr ystal display (LCD) technology. ◆ Functionally Rich ◆ Multi-use Remote Cont...

Page 3 - Table of Contents; Trademarks

3 Table of Contents Features and Design . . . . . . . . . . . . . . . . 2Table of Contents . . . . . . . . . . . . . . . . . . 3To The Owner . . . . . . . . . . . . . . . . . . . . . 4Safety Instructions . . . . . . . . . . . . . . . . . 5 Air Circulation 8 Installing the Projector in Proper Directi...

Page 4 - Safety Precaution; THIS APPARATUS MUST BE EARTHED .; CAUTION ON HANGING FROM THE CEILING; To The Owner; RISK OF ELECTRIC SHOCK; NOTE FOR CUSTOMERS IN THE US

4 Safety Precaution WARNING: ● THIS APPARATUS MUST BE EARTHED . ● TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE . – This projector produces intense light from the projection lens. Do not stare directly into the lens, other wise eye damage could result...

Page 5 - Safety Instructions

5 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow a...

Page 7 - Precaution During Use

7 – Remove the batteries when they have been exhausted or not in use for an extended period of time. – Be sure to replace both batteries at the same time. Do not mix batteries of different types. – Insert batteries correctly according to the “+” and “-“ markings. – If a fluid from a battery leaks an...

Page 8 - CAUTION; Air Circulation; Top Panel

8 Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions...

Page 9 - Installing the Projector in Proper Directions; Positioning Precautions

9 Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. When installing the pr...

Page 10 - Moving the Projector; CAUTION IN CARRyING OR; Cautions in Handling the Projector

10 Moving the Projector Use the handle grip when moving the projector. Retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When this projector is not in use for an extended period, put it into a suitable case to protect the projector. CAUTION IN CARRyING OR TRANSPORT...

Page 11 - AC Power Cord for the United States and Canada:; AC POWER CORD REQUIREMENT; Compliance; Canadian Radio Interference Regulations

11 The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard A...

Page 12 - Part Names and Functions; Bottom; Hot air is exhausted from the exhaust

12 Part Names and Functions Bottom Back e Front q w q Indicators w Top Cover e Top Cover Release Button r Infrared Remote Receiver (Front) t Projection Lens (not supplied) y Light-Block Sheet u Adjustable Feet i Air Intake Vent o Filter Cover !0 Lamp Cover !1 Exhaust Vent CAUTION Hot air is exhauste...

Page 13 - Rear Terminal; II

13 Rear Terminal t REMOTE TERMINAL When using the wired remote control unit, connect the wired remote control unit to this terminal with a remote control unit cable (not supplied). y USB TERMINAL (Series B) Use this connector when controlling a computer with the remote control unit of the projector....

Page 14 - AUDIO MONITOR OUTPUT TERMINAL; This terminal outputs the audio signal from; MONITOR OUT TERMINAL; This terminal can be used to output the incoming; Kensington Security Slot; This slot is for a Kensington lock used to deter theft; The infrared remote receiver is also located in the

14 A Rear Terminal Part Names and Functions !2 AUDIO MONITOR OUTPUT TERMINAL This terminal outputs the audio signal from computer or video equipment to external audio equipment (p.26). !2 !1 !1 MONITOR OUT TERMINAL This terminal can be used to output the incoming analog RGB signal from INPUT 1-3 ter...

Page 15 - Side Control and Indicators; Side Control

15 q POWER button Turn the projector on or off (pp.28–29). e MENU button Open or close the On-Screen Menu (p.30). r Point ed7 8 ( VOLUME + / – ) buttons – Select an item or adjust the value in the On- Screen Menu (p.30). – Pan the image in Digital zoom + mode (p.46). – Adjust the volume level (with ...

Page 16 - Remote Control Unit

16 q STAND-By button Turn the projector off (p.29). r ON button Turn the projector on (p.28). y INPUT button Select a signal (pp.37–39). i ASPECT button Select the screen size (p.34). r Remote Control Unit !0 !4 q !4 L-CLICK button Act as the left mouse button for wireless mouse operation (p.34). e ...

Page 18 - Remote Control Battery Installation; Remote Control Receivers and Operating Range; WARNING

18 Remote Control Battery Installation 1 2 3 Open the battery compartment lid. Install new batteries into the compartment. Replace the compartment lid. Press the lid downward and slide it. Two AAA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in th...

Page 19 - Remote Control Unit Code

19 The eight different remote control unit codes (Code 1–Code 8) are assigned to this projector. Switching the remote control unit codes prevents interference from other remote control units when several projectors or video equipment next to each other are operated at the same time. Change the remot...

Page 20 - Adjustable Feet; Installation

20 ADJUSTABLE FEET Projection angle can be adjusted up to 6.5 degrees with the adjustable feet. Rotate the adjustable feet and adjust the projector to the proper height; to raise the projector, rotate the both feet clockwise. To lower the projector or to retract the adjustable feet, rotate the both ...

Page 21 - Be careful when handling the lens. Do not drop.; Lens Installation and Replacement; Turn off the projector and unplug the AC power cord.

21 When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. ✔ Note: Be careful when handling the lens. Do not drop. Front cover Slide the front cover upword and remove i...

Page 22 - NOTES ON LENS INSTALLATION AND REPLACEMENT; (follow this procedure for; , remove the 4 screws fixing the lens attachment to detach it; procedure for replacing the lens); Light-Block Sheet for each Lens

22 NOTES ON LENS INSTALLATION AND REPLACEMENT ● Do not touch or remove any parts except the lens and related parts. It may result in malfunctions, electrical shock, fire hazard or other accidents. ● Before installing or replacing the lens, check that the Model No. of the Projection Lens matches to t...

Page 23 - Focus adjustment; BE SURE TO CHECK FOR SAFETy

23 Installation Installation Some parts are not used for installation or replacement. Keep these parts for later use. Focus Lock Screw Focus Lock Ring Focus adjustment Set up the projector and project image on the screen. 1 . Loosen the Focus Lock Screw on the lens. 2 . Rotate the lens to obtain pro...

Page 24 - Connecting to a Computer (Digital and Analog RGB); Cables used for connection

24 Monitor Output BNC cable Connecting to a Computer (Digital and Analog RGB) Monitor Output G B R H/V V DVI-Digital cable VGA cable VGA cable USB cable (Supplied) USB port ✔ Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables...

Page 25 - Monitor Out Signal Table

25 Connecting to Video Equipment (Video, S-Video) S-video cable S-video Output Composite Video INPUT 3 (Y - Pb/Cb - Pr/Cr) BNC cable ✔ Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables used for connection ( ] = Cables not su...

Page 26 - Connecting for Audio Signal

26 Audio Output Audio cable (stereo) Connecting for Audio Signal AUDIO IN I / II ✔ Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Cables used for connection ( ] = Cables not supplied with this projector.) Audio Output Installati...

Page 27 - Connecting the AC Power Cord; NOTE ON THE POWER CORD; Projector side; For Continental Europe

27 This projector uses nominal input voltages of 100–120 V or 200– 240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of p...

Page 28 - Turning On the Projector; Enter a PIN code; When using side control; When using remote control unit; Basic Operation; CAUTION ON HANDLING PIN CODE

28 Turning On the Projector Connect the projector’s AC power cord into an AC outlet. The LAMP/SHUTTER indicator lights red and the POWER indicator lights green.Press the POWER button on the side control or the ON button on the remote control unit. The LAMP/SHUTTER indicator dims and the cooling fans...

Page 29 - Turning Off the Projector

29 Press the POWER button on the side control or the STAND-BY button on the remote control unit, and “Power off?” appears on the screen. Press the POWER button on the side control or the STAND-BY button on the remote control unit again to turn off the projector. The LAMP/SHUTTER indicator lights bri...

Page 30 - How to Operate the On-Screen Menu

30 Side Control OK button How to Operate the On-Screen Menu MENU button POINT buttons On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. Use the Point 7 8 buttons to select a Menu ico...

Page 31 - Menu Bar; For Computer Source

31 Basic Operation Menu Bar For Computer Source For Video Source For detailed functions of each menu, see “Menu Tree” on pages 74-76. q w o i u y t r e !0 Show the selected of the On-Screen Menu. Used to select computer system (p. 40). Used to select an image level among Standard, High contrast, and...

Page 32 - Operating with Projector Control; Lens Shift Adjustment; Zoom Adjustment; Focus Adjustment; Lens Operation; ZOOM; POINT buttons; Shutter Function; SHUTTER button

32 Operating with Projector Control The following lens operation can be made with the Lens button on the side control. Press the LENS button to enter each lens operation mode. The selected adjustment display appears on the screen. Display “Lens shift” on the screen. Use the Point ed7 8 buttons to po...

Page 33 - VOL – button; Direct Operation; Sound Adjustment; Input pattern

33 1 2 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Sound Menu icon. Press the VOLUME+/– buttons on the side control or on the remote control unit to adjust the volume of Audio Output. The volume dialog box appears on the screen ...

Page 34 - Operating with Remote Control Unit; • See the next page for the description; POINT; ZOOM buttons; ASPECT button

34 Operating with Remote Control Unit Using the remote control unit for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Remote Control Unit D-ZOOM button AUTO PCbutton ZOOM buttons...

Page 35 - POINTER button; • S e e t h e p r e v i o u s p a g e f o r t h e; FREEZE button; MOUSE POINTER button

35 FILTER button Press and hold the FILTER button for more than 5 seconds to operate electrically operated filter to replace the filter. KEySTONE button Reduce the upper width with Point e button. Re d u c e t h e l owe r w i d t h with Point d button. Reduce the left part with Point 7 button. Reduc...

Page 36 - Pointer Function; Pointer; Wireless Mouse Operation

36 Pointer Function Pointer ✔ Note: • You can choose the pattern of Pointer (Cross/Arrow/Dot) in the Setting Menu (p. 58) You can move the Pointer of the projector with the remote control unit to emphasize a part of the projected image. Press the POINTER button to activate the Pointer function. 1 2 ...

Page 37 - Input; Input Selection; Remote Control Unit Operation

37 Input Remote control unit button operation INPUT button Press the INPUT button on the side control or the remote control unit. It switches to INPUT 1, INPUT 2, and INPUT 3 as you press the INPUT button.Before using the INPUT button on the side control or the remote control unit, you must select a...

Page 38 - Computer Input Source Selection; WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ); Input 1; Source Select Menu; Menu Operation; WHEN SELECTING INPUT 2 (5 BNC INPUT jACKS ); INPUT MENU; RGB

38 Computer Input Source Selection WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the INPUT Menu icon. Use the Point ed buttons to move the red arrow pointer to the desired input and t...

Page 39 - Input 2; Video Input Source Selection

39 When the video input signal is connected to the Y- Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. When the video input signal is connected to the VIDEO jack, select Video. When the video input signal is connected to the S- VIDEO jack, select S-Video. When connecting to video equipment, select the typ...

Page 40 - Computer System Selection; One of the following messages may appear when:; Auto; Selecting Computer System Manually; PC SySTEM MENU; PC system can also be selected manually.; Automatic Multi-Scan System; Computer Input

40 Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, UXGA or WUXGA (refer to “Compatible Computer Specifications” on pages 80–81). If a computer is selected as a signal source, this projector automatically detects t...

Page 41 - Auto PC Adjustment; positions to conform to your computer.; PC ADjUST MENU; The Auto PC adjustment function can be operated directly

41 Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Me...

Page 42 - Manual PC Adjustment; recall the setting for a specific computer.

42 Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store th...

Page 44 - IMAGE SELECT MENU; Image Level Selection

44 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired image level and then press the OK button. IMAGE SELECT MENU Normal picture level pr...

Page 45 - Screen Size Adjustment

45 Screen Size Adjustment Select the desired screen size that conforms to the input signal source. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Aspect Menu icon. 1 Use the Point ed buttons to move the red frame pointer to the des...

Page 46 - For zooming in and out the images

46 Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the OK button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. You can also enter the Digital zoom + mode by...

Page 47 - Video System Selection; INPUT 2 TERMINAL; Video Input

47 AV SySTEM MENU (VIDEO OR S-VIDEO) AV SySTEM MENU (COMPONENT VIDEO) Video System Selection Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. Use the Point ed buttons to move the red arrow pointer to the desired ...

Page 48 - Standard

48 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired image level and then press the OK button. IMAGE SELECT MENU Image Level Selection M...

Page 49 - ASPECT MENU; Custom

49 Screen Size Adjustment Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Aspect Menu icon. Use the Point ed buttons to move the red frame pointer to the desired function and then press the OK button. 1 2 ✔ Note: • Wide cannot be op...

Page 51 - Image Adjustment; COLOR SELECTION MODE; Picture Image

51 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the OK button to display the adjustment dialog box. Use the Poi...

Page 52 - LIST MODE

52 Auto picture control Use the Point 7 8 buttons to select the desired Auto picture control position (Off, L1 or L2). Off . . . . Auto picture control OFF position. L1 . . . . . Auto picture control LEVEL 1 position. L2 . . . . . Auto picture control LEVEL 2 position. Clear the check mark if you do...

Page 54 - Setting

54 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 1 2 Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Kore...

Page 56 - Enter a Logo PIN code

56 Change the Logo PIN code lock setting After a correct Logo PIN code is entered, the following dialog box appears. Use the Point 7 8 buttons to switch On/Off, This function prevents an unauthorized person from changing the screen logo. Off . . . . The screen logo can be changed freely from the Log...

Page 58 - On start; Power management; RC sensor

58 On start When this function is set to “On,” the projector will be automatically turned on just by connecting the AC power cord to the wall outlet. ✔ Note: • Be sure to turn off the projector properly (see “Turning Off the Projector” on page 29). If the projector is turned off in the incorrect seq...

Page 59 - If the side control accidentally becomes locked and you

59 Security Key lock Security Select Key lock and this box appears. Choose one of the alternatives with the Point ed buttons and select [Yes] to activate it. This function locks the side control and remote control unit buttons to prevent operation by unauthorized persons. . . . . . Unlocked. . . . ....

Page 61 - Lamp counter; Shutter

61 Lamp counter This function is used to reset the lamp counter. When the lamp life reaches a recommended lamp replacement time, the time shown in the dialog box turns red and the Lamp replacement icon appears on the screen, indicating that the end of lamp life is approaching. When replacing the pro...

Page 63 - Filter Instructions; Maintenance and Care

63 Filter Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. This p...

Page 64 - Reset the filter counter and the scroll counter; Replacing the Filter Cartridge; RECOMMENDATION; We recommend avoiding dusty/smoky environments when

64 Turn off the projector, and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. 12 Press s on the filter cover to release the latch and open the filter cover. 3 Put the new one back into the position and close the filter cover. Make sur...

Page 65 - Be sure to reset the Scroll counter after replacing the filter; Resetting the Scroll Counter; Scroll counter; Be sure to reset the Filter counter after replacing the filter; Resetting the Filter Counter; Filter counter

65 Be sure to reset the Scroll counter after replacing the filter cartridge. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. Use the Point ed buttons to move the red frame pointer to Filter counter and then press ...

Page 66 - Reset the Lamp counter; Lamp Replacement; LAMP REPLACE indicator

66 Turn off the projector and unplug the AC power cord. Let the projector cool for at least 1 hour. Loosen the screw and open the lamp cover. Pull out the lamp by using the built in handle. 1 3 Replace the lamp with a new one. Make sure that the lamp is properly and fully inserted. 4 Open the filter...

Page 67 - Resetting the Lamp Counter

67 ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No . of your projector : LV-7590 ● Replacement Lamp Type No . : LV-LP33 Resetting the Lamp Counter Be sure to reset the Lamp counter after the lamp is r...

Page 68 - LAMP HANDLING PRECAUTIONS

68 This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for e...

Page 70 - Warning Indicators; The projector is shut down and the WARNING TEMP.; Then check the matters below:; The projector is shut down and the LAMP/SHUTTER indicator

70 The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING indicators and the POWER indicator to take proper maintenance. Warning Indicators The projector is shut down and the WARNING TEMP. indicator is blinking red. When the temperature ins...

Page 71 - Troubleshooting; Make sure that all power is switched on.; Appendix; Solutions; appears on the screen

71 Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector to peripheral equipment as described on pages 24–26. 2. Check the cable connection. Make sure that all computers, video equipment, ...

Page 72 - The color is strange.; No sound

72 appears on the screen – Filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 64 -65) The image is out of focus. – Adjust the focus of the projector.– Check Projection Lens to see if it needs cleaning. ✔ Note: Moving the projector from a cool temperature locati...

Page 73 - Indicators blink or light.

73 WARNING: High voltages are used to operate this projector . Do not attempt to open the cabinet . If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem...

Page 74 - Menu Tree; Computer Input/Video Input; Image Adjust; Information; Sound

74 Menu Tree Input RGB (PC analog) Go to System (1) Input 1 Y, Pb/Cb,Pr/Cr Computer Input/Video Input RGB (Scart) RGB (PC digital) RGB (AV HDCP) Network Video RGB Go to System (2) Go to System (3) Go to System (1) Go to System (2) Video Y, Pb/Cb,Pr/Cr S-video Go to System (3) Go to System (2) Input ...

Page 77 - Indicators and Projector Condition; The projector is operating normally .; Indicators; Projector Condition

77 Indicators and Projector Condition Check the indicators for the projector condition. Appendix The projector is operating normally . Indicators Projector Condition POWER green LAMP/ SHUTTER red/blue WARNING TEMP. red WARNING FILTER orange LAMP REPLACE orange The projector is off. (The AC power cor...

Page 78 - The projector is detecting abnormal condition .; WARNING FILTER

78 Appendix The projector is detecting abnormal condition . Indicators Projector Condition POWER green LAMP/ SHUTTER red/blue WARNING TEMP. red WARNING FILTER orange LAMP REPLACE orange The temperature inside the projector is elevated close to the abnormally high level. The temperature inside the pr...

Page 80 - RESOLUTION; RESOLUTION; Compatible Computer Specifications; and less than 180 MHz of Dot Clock.

80 ON-SCREEN DISPLAy RESOLUTION H-Freq . (kHz) V-Freq .(Hz) VGA 1 640x480 31.470 59.880 VGA 2 720x400 31.470 70.090 VGA 3 640x400 31.470 70.090 VGA 4 640x480 37.860 74.380 VGA 5 640x480 37.860 72.810 VGA 6 640x480 37.500 75.000 VGA 7 640x480 43.269 85.000 MAC LC13 640x480 34.970 66.600 MAC 13 640x48...

Page 82 - Technical Specifications

82 Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 14.56” x 7.36” x 17.32” (370.0 mm x 187.0 mm x 439.9 mm) Net Weight 25.1 lbs (11.4 kg) Feet Adjustment 0˚ to 6.5˚ Panel Resolution LCD Panel System 1.3” TFT Active Matrix type, 3 panels Pan...

Page 83 - for wide variety of uses.; PJ Link Notice; To the sales and service engineers:

83 Optional Parts Lens Replacement The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide variety of uses. For installation and replacement of the lens, always contact the sales dealer. The projector lens must be installed or repla...

Page 84 - Configurations of Terminals

84 Configurations of Terminals INPUT 1 (ANALOG)/ MONITOR OUT (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 CONTROL TERMINAL (D-sub 9 pin) ----- R X D T X D ----- SG ----- RTSCTS Serial 12345678 INPUT 1 (DIGITAL) (DVI 24 PIN) 19 17 2 1018 3 1119 4 1220 5 1321 6 1422 7 1523 8 1624 T.M.D.S. D...

Page 86 - Dimensions

86 Dimensions 3.94 (100) 14.57 (370) 5.75 (146) 17.32 (439.9) 13.58 (345) 4.13 (105) 5.20 (132) 4.33 (110) 4.33 (110) 7.36 (187) 6.5º MAX Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 2.05 (52) Unit: inch (mm) Appendix

Page 87 - Serial Control Interface; Example; Enter with ASCII 64-byte capital characters and one-; Operation

87 Serial Control Interface Appendix This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Connect a RS-232C serial cross cable to CONTROL PORT on the projector and serial port on the PC. (See p.24) Launch a communication software prov...

Page 88 - Format; Functional Execution Command

88 The command is sent from PC to the projector with the format below; 'C' [Command] 'CR' Command: two characters (refer to the command table below. -The projector decodes the command and returns the 'ACK' with the format below; 'ACK' 'CR' -When the projector can not decode the command, it returns w...

Page 89 - Status Read Command

89 Status Read Command Appendix The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table below. The projector decodes the command and returns the 'Character string' with the format below; Format The tables on page 88 a...